Fluke 902 FC True-RMS HVAC Clamp Meter

Fluke 902 FC True-RMS HVAC Clamp Meter is rated 4.3 out of 5 by 33.
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 47.63ms
  • Fluke 902 FC True-rms HVAC Clamp Meter
  • Fluke 902 FC True-rms HVAC Clamp Meter
  • Fluke 902 FC True-rms HVAC Clamp Meter
  • Fluke 902 FC True-rms HVAC Clamp Meter

Key features

  • A wireless Fluke Connect®-enabled clamp meter designed specifically for the needs of HVAC technicians
  • Offers 200 µA DC current measurements to measure flame rod
  • Extends resistance range to measure thermistors up to 60kΩ
  • Captures flue gas temperature
  • Measures start and run motor capacitors
  • Measures variable frequency drive performance

Product overview: Fluke 902 FC True-RMS HVAC Clamp Meter

Fluke 902 FC True-RMS HVAC Clamp Meter helps HVAC technicians work more efficiently on the work site.

The Fluke 902 FC Clamp Meter, with Fluke Connect wireless connectivity, can help HVAC technicians improve productivity in the field. The rugged dual-rated CAT III 600 V, CAT IV 300 V meter equips you to perform many essential HVAC system measurements: microamps for testing pilot light sensors; resistance up to 60 kΩ; AC current and AC/DC voltage; capacitance; and contact temperature, all with just one tool. Plus its small form factor makes it easy to hang on to and navigate in tight work spaces.

Part of the Fluke Connect wireless family

As part of the Fluke Connect family, the 902 FC can transmit measurements to a smartphone or tablet for later, detailed analysis. No need to write down the results. Trend and monitor measurements live on your phone screen, and upload those measurements to the cloud. Combine measurement data from multiple Fluke Connect test tools to create and share reports from the job site via email, and collaborate in real time with other colleagues with ShareLive™ video calls or email.

The 902 FC can also decrease the frequency of wearing personal protective equipment (PPE) when working on high voltage/current panels. Simply turn off the panel. Verify that it is de-energized using standard safety procedures. Place the clamp and synch it to a smartphone. Close the panel, reenergize it, and take measurements from a safe distance.

Other useful features:

  • Ergonomic design fits in your hand and can be used while wearing personal protective equipment
  • Large, easy-to-read backlit display improves readings in low light settings
  • Connects to your smartphone via Fluke Connect so you can read measurements at a safer distance
  • Measures AC current to 600 A and AC and DC voltage to 600 V
  • Measures capacitance to 1000 µF and DC current to 200 µA
  • Measures temperature from -10 °C to 400 °C (14 °F to 752 °F)
  • Offers True-RMS voltage and current measurements to accurately measure non-linear signals
  • Measures resistance to 60 kΩ
  • Offers Min/Max recording to capture variations automatically
  • Runs on two AA alkaline batteries

What's in the box:

  • 902 FC Clamp Meter
  • (1 pair) TL75 test leads
  • 80BK integrated DMM temperature probe
  • 2 AA Alkaline Batteries (Installed)
  • Soft carrying case
  • Quick Reference Guide

Specifications: Fluke 902 FC True-RMS HVAC Clamp Meter

A ac (via Jaw)
Resolution0.1 A
Accuracy2.0% ±5 digit (45-65 Hz)
2.5% ±5 digit (65-400 Hz)
Range600.0 A
Crest Factor (50Hz or 60Hz)2.5 MIN@220 A
> 1.4 MIN@600 A
Add 2% for CF>400 A
V ac
Resolution0.1 V
Accuracy1.5% ±5 digits
Range600.0 V
V dc
Resolution0.1 V
Accuracy1.5% ±5 digits
Range600.0 V
Accuracy1% ±5 digits
Range600/6000/60.00 kΩ
Resolution0.1/1 µF
Accuracy1% ±4 digits
Range100.0/1000 µF
Resolution0.1 µA
Accuracy1% ±5 digits
Range200 µA
Contact temperature
Resolution0.1 C/F
Accuracy1% ±8 digits
Range-40 to 400 °C (-40 °F to 752 °F)
Continuity beeper
Beeper volume75 dBA nom. 15 cm. from case front
On threshold<=30 Ω
Mechanical and General Specifications
Maximum voltage between any terminal and earth ground1000 V
Battery type2 AA alkaline batteries, NEDA 15A, IEC LR6
TemperatureOperating: -10 °C to +50 °C (14 °F to +122 °F)
Storage: -40 °C to +60 °C (-40 °F to +140 °F)
Operating humidityNon condensing (< 10 °C [50 °F]), ≤90 % RH (at 10 °C to 30 °C [50 °F to 86 °F]), ≤75 % RH (at 30 °C to 40 °C (86 °F to 104 °F)), ≤45 % RH (at 40 °C to 50 °C (104 °F to 122 °F))
AltitudeOperating: 3,000 m (9,842 ft)
Storage: 12,000 m (39,370 ft)
Dimensions230 x 83.7 x 45.4mm (9.06 x 3.30 x 1.39 in)
Weight (meter only)419 g (15 oz)
SafetyIEC 61010-1, Pollution Degree 2
IEC 61010-2-032: CAT III 1000 V / CAT IV 600 V
IEC 61010-2-033: CAT III 1000 V / CAT IV 600 V
IP RatingIEC 60529: IP30, non-operating
Radio Frequency CertificationFCC ID:T68-FBLE IC:6627A-FBLE
Electromagnetic Compatibility (EMC)International: IEC 61326-1: Portable, Electromagnetic Environment, IEC 61326-2-2 CISPR 11: Group 1, Class A Korea (KCC): Class A Equipment (Industrial Broadcasting & Communication Equipment) USA (FCC): 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.
Temperature coefficientsAdd 0.1 × specified accuracy for each degree C above 28 °C or below 18 °C

Models: Fluke 902 FC True-RMS HVAC Clamp Meter

FLK-902 FC
Fluke 902 FC True-rms HVAC Clamp Meter
Buy it


  • TL75 test leads (1 pair)
  • 80BK integrated DMM temperature probe (1)
  • AA alkaline batteries (2)
  • Soft carrying case
  • User's manual
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 116.05ms
  • bvseo-msg: HTTP status code of 404 was returned;
Rated 4 out of 5 by from Amp clamp issues I bought this meter in December 2018. Used it for around a year then had amp clamp issues. Not reading running or starting amps intermittently/accurately. Which is why it has 4 stars. I will say though after procrastinating for a year of not getting it warrantied I contacted Fluke recently about the matter & they did send me a complete replacement taking around a month to get. Only took so long because of mailing issues. I love this meter for the residential HVAC trade but I wish it would last longer & hopefully not having to warranty again.
Date published: 2021-04-16
Rated 5 out of 5 by from Great Meter Very nice, accurate, reliable meter for my HVAC business.
Date published: 2020-12-31
Rated 1 out of 5 by from Disappointed again My first 902 meter lasted about 3 years and then when it stopped reading amperage and occasionally not turning on, and I found out that it had been replaced with the 902FC and was no longer supported. Although disappointed I was glad to see the wireless feature available. After having the 902FC meter and using it I noticed that it would no longer read amperage correctly, then it stopped reading micro farads and voltage. Being in the HVAC trade and relying on my tools, I have been very disappointed overall with the Fluke 902 FC line and their durability. I have other Fluke meters that have far outlasted both of the 902s and that is frustrating as someone who buys quality. I sincerely hope that Fluke steps up their game in the future and for now I am switching meter brands.
Date published: 2020-07-04
Rated 2 out of 5 by from Failed Amp clamp Have replaced several fluke 902fc meters for the same reason , the amp clamp stopped working between 6months and a 1½ years & serial # wiped off since its on outside of meter. I'm disappointed in the durability.
Date published: 2020-03-15
Rated 2 out of 5 by from Amp clamp failure I really liked it when I first purchased it about half a year ago, but the amp clamp on it has already failed and no longer gives amp readings. After some searching around I learned that it's a very common problem with this model, which is disappointing because I always liked Fluke products.
Date published: 2019-05-24
Rated 5 out of 5 by from Best meter I have owned so far! I purchased my fluke 902fc about 3 months ago and am extremely pleased with its performance and features. I am a commercial HVAC technician and use this meter on a daily basis. Has alll the needed ranges and setting for the HVAC trade! Lots the ability to test flame sensors and lots the Bluetooth fluke connect feature as well!
Date published: 2018-10-30
Rated 5 out of 5 by from The best HVAC amp clamp yet I work in HVAC and want my customers to get the best possible service from me, that is why I choose Fluke over the others. Accuracy means so much to me and when you compare the 902 FC to other meters on the market you can see why I made this purchase. The 902 was a good meter the 902 FC is better for me personally. Pros The smaller size is nice and fits better in tighter access points. The dial now has a positive click feel versus the old 902. Fluke Connect Fluke product dependability/longevity Safety Cons Auto time off requires you to switch the dial to off then to the desired selection versus just moving the dial one click to another section then back saving time. Hanging kit not included Would be nice to have a probe clip or holder on clamp Clamp is wide but no wider than other Fluke Amp Clamps. As you can see the cons are insignificant to the value you get with the Pros. To me saving my customers money and time are critical. The one or more percent accuracy to me is why I choose Fluke.
Date published: 2016-12-12
Rated 5 out of 5 by from Excellent product Bought this a few weeks ago and absolutely love it. Really love the Bluetooth feature.
Date published: 2016-12-10
Rated 5 out of 5 by from Great Meter I work residential HVAC and this truly is the perfect meter. This meets all my needs and with the higher ohm range I can diagnose the most advanced equipment. Very happy with my purchase.
Date published: 2016-12-09
Rated 5 out of 5 by from very durable! I purchased this meter last month, and I am extremely impressed. It is a huge improvement of my old equipment. I use it on a daily basis, in harsh conditions, and it has yet to let me down!
Date published: 2016-12-09
Rated 4 out of 5 by from Wireless Bluetooth Readings Phone app work well with this bluetooth amp probe if you are close to the unit.
Date published: 2016-12-08
Rated 5 out of 5 by from Fluke Dependability with Wireless Connectivity I've had this meter for a few months now and love it. Being able to connect the clamp and get a true amp reading on an HVAC motor with the door on the equipment is invaluable in troubleshooting all types of equipment. I also like that with the connect app, I can watch the graph in real time and my employees can also share real time data with me from anywhere. That alone has saved countless hours of windshield time for me.
Date published: 2016-12-08
Rated 5 out of 5 by from Solid and dependable equipment I bought this meter for HVAC electrical diagnostics for home use for my HVAC system and other electrical issues that arise. I don't have an electrical/electronic background and this meter makes things easy. Great quality also!
Date published: 2016-12-08
Rated 5 out of 5 by from well worth the money my Fluke meter and all other Fluke products way outlast any other brands I have purchased. Very easy to use and dependable. Only brand I purchase at work too for employees.
Date published: 2016-12-08
Rated 5 out of 5 by from Awesome all around meter! I have been using the 902 meter for over 8 years. It is rugged and durable and has stood up to everyday use in the hvac industry. Can't beat Fluke!
Date published: 2016-12-08
Rated 4 out of 5 by from Fluke 902 FC I a pleased with this item. The only downfall and reason for 4 stars is that the distance of use for the wireless is short. I can only be about 15ft from where I have my meter.
Date published: 2016-12-07
Rated 5 out of 5 by from Great improvements over the original 902 I like the improvements made to the 902 FC from the original 902. If this meter had DC mili-volts it would be an excellent all day-every day HVAC meter. The Fluke connect is a great feature, and has saved me several times already when I needed to use the meter in one location, but couldn't see the display, and the Fluke Connect app allowed me to get the job done remotely. I really like the Fluke connect, and expect to expand on it over the next few years.
Date published: 2016-12-07
Rated 5 out of 5 by from Great features! I bought this two months ago and I'm very pleased. It has everything I need in a multimeter
Date published: 2016-12-07
Rated 5 out of 5 by from Works great, Fluke Connect is Awesome I bought this because I wanted to do take readings using Fluke Connect. I can set my meter in the panel and get readings safely. Additionally, I have a record on my phone of the data that was gathered.
Date published: 2016-12-07
Rated 5 out of 5 by from Perfect HVAC clamp meter! This meter is great for all the HVAC electrical and temperature diagnostic work. It might be basic but with Fluke Connect it's much safer.
Date published: 2016-10-18
  • y_2023, m_6, d_7, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.35
  • cp_2, bvpage2n
  • co_hasreviews, tv_5, tr_28
  • loc_en_US, sid_3739301019700, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 23.6ms
Please enable cookies to view product reviews.