Fluke TL75 Hard Point™ Test Lead Set

Fluke TL75 Hard Point™ Test Lead Set is rated 4.3 out of 5 by 30.
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 22.43ms
  • TL75 Hard Point Test Lead Set
  • TL75 Hard Point Test protective caps
  • TL75 Hard Point Electrical Test
  • Fluke TL75 Hard Point™ Test Lead Set

Key features

  • Single unit combining a test lead and probe, measuring 48 inches (1.22 meters) in length
  • PVC-insulated probes, ensuring secure and accurate measurements
  • CAT II 1000 V, 10 A rated, When the protective caps are placed on the leads, the rating jump up to CAT IV 600 V, CAT III 1000 V
  • see compatible products below

Product overview: Fluke TL75 Hard Point™ Test Lead Set

Product overview: Fluke TL75 Hard Point™ Test Lead Set

The Fluke TL75 Hard Point™ Test Leads are a set of comfort grip, PVC-insulated probes. TL75s offer the convenience of a test lead and probe together in one unit with a variety of connections. This set of test leads are recommended for all general-purpose measurements and are compatible with a wide range of Fluke meters and tools.

Designed for safety

The Fluke TL75 Hard Point™ Test Lead Set is CAT II 1000 V, 10 A rated. When the protective caps are placed on the leads, the ratings jump up to CAT IV 600 V, CAT III 1000 V.

Compatible with Fluke alligator clips

Expand your measurement capabilities with special adapters to your TL75 set. Add alligator clips or adapters to accomplish even more:

What's in the box:

  • One pair (red, black) PVC-insulated leads with banana plug end connectors
  • Two protective caps
  • One-year warranty

Models: Fluke TL75 Hard Point™ Test Lead Set

Fluke TL75 Hard Point™ Test Lead Set
Buy it
  • One pair (red, black) of comfort grip probes
  • 48 inches (1.22 meter) PVC insulated test leads with right-angle shrouded banana plugs
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 21.34ms
  • bvseo-msg: HTTP status code of 404 was returned;
Rated 3 out of 5 by from Good standard DMM lead set. Ordered a replacement set of leads for my Fluke 179 DMM - my original set were getting old (15+ years). I was told by a Fluke technician that TL75 were the set to replace my original set. This set is Ok but the PVC insulation is more stiff than my original set. I returned them and will order Fluke set TL76 (has silicone insulation and should be more flexible). I just wish Fluke would keep their manufacturing in the United States.
Date published: 2022-10-15
Rated 2 out of 5 by from They break internally, cheaply made They don't make very good contact, requiring more pressure than others to get a reading. Then after a few years, they break, like others have said. I'm buying Probe Masters now, Made in USA, and work much better.
Date published: 2022-04-14
Rated 5 out of 5 by from Great product Nothing beats the quality and performance of OEM test leads.
Date published: 2021-11-14
Rated 5 out of 5 by from They sure do test Worked exactly as intended, even in my vintage Fluke Multimeter.
Date published: 2021-10-01
Rated 5 out of 5 by from old meter and new leads. good quality leads. i have had this fluke meter for over twenty years and with new leads it works like day 1.
Date published: 2021-03-06
Rated 1 out of 5 by from Budget leads These came with a fluke-325 and they do not belong with and industrial meter. They get stiff in cold weather so avoid these if you have any work outside, even -10C is too cold for these. They also lack quality strain reliefs I've come to expect from fluke. I will be looking for a different set.
Date published: 2021-02-04
Rated 5 out of 5 by from BEST TEST LEADS MONEY CAN BUY Fluke Leads are the best money can buy. Unfortunetly someone else liked my old test leads more than me.
Date published: 2020-12-16
Rated 2 out of 5 by from Not as good as I expected I bought the Fluke 87V, Superiority and Excellence for the multimeter. Probes are an interface for measuring and these probes that came with it were poor quality. I can tell that their older probes from 90's and 2000's were much better made. The older ones I used were in industry and they were fluid, easy to bend, tough ends, and long. The TL75 is complete opposite. They are... 1. stiff 2. the cables still have fold creases from manufacturing and wont go away. I have used them quite a bit! 3. the lead points look and feel cheap 4. too short in length 5. made of some crappy plastic that shows that cutting cost is more important than quality 2 stars for longevity and not failing. I will be looking for replacements for this meter. I suspect based on the other reviews of their leads I will be looking else where. I hope that they improve on this because I am a brand person and I like sticking with matching high quality equipment. Lastly, I would have no problem shelling out way more money for something extremely high quality. Especially using and experiencing their older leads showed me how great they can be! Note: accuracy will be used to judge performance of measurement and how easy they were to keep in place to get a measurement. ex. holding it on a tiny to get a measurement and the stiffness keeps pushing hand around!
Date published: 2020-10-27
  • y_2024, m_6, d_25, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_16, tr_14
  • loc_en_US, sid_1699191259188, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 24.1ms
Please enable cookies to view product reviews.