Fluke i410 AC/DC Current Clamp

Fluke i410 AC/DC Current Clamp is rated 3.8 out of 5 by 10.
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 23.26ms
  • Fluke i410 AC/DC Current Clamp
  • Fluke i410 AC/DC Current Clamp

Key features

  • Battery-powered Hall-effect probe measures 1A to 400 A
  • 1mV/Amp output guarantees easy reading on your meter
  • Take accurate current readings without breaking the circuit
  • Maximum conductor Ø 32 mm
  • CAT III 600 V safety rating
  • Also available with softcase for DMM and clamp (i410 kit)
  • One year warranty

Product overview: Fluke i410 AC/DC Current Clamp

The Fluke i410 AC/DC current clamp expands the functionality of digital multimeters and measures up to 400 amps for both AC and DC current. The Large clamp claw gives you access to difficult to reach areas. The kit includes a handy carrying case.

Specifications: Fluke i410 AC/DC Current Clamp

Measurement typeHall sensor
Nominal current range400 A, AC/DC
Continuous current range1 A - 400 A AC/DC
Maxium non-destructive current400 A
Lowest measureable current0.5 A
Basic accuracy3.5% + 0.5 A
(% reading + floorspec)
Useable frequencyDC - 3 kHz
Output level(s)1 mV/A
Zerro error adjustmemtYes
Safety Specifications
SafetyCAT III, 600 V
Maximum voltage600 V
Mechanical and General Specifications
Warranty1 year
Battery life9 V, 60 h
Maximum conductor diameter30 mm
2 x 25 mm
Output cable length1.6 m
Shrouded banana plugsYes

Models: Fluke i410 AC/DC Current Clamp

Fluke i410

AC/DC Current Clamp

Buy it

Can this be used with a 77IV?

Asked by: elreyB
Yes, the Fluke i410 AC/DC Current Clamp and Fluke 77 IV Digital Multimeter are compatible.
Answered by: FlukeCorp
Date published: 2024-06-20

Can this be used with an 88v ?

Asked by: Cooler guy
The Fluke i410 AC/DC Current Clamp's output is 1mv/A. The Fluke 88V will have no problem reading 1mv.
Answered by: FlukeCorporation
Date published: 2024-06-17

1. Can we interface with an oscilloscope using the available plug for the current probe? 2. The BNC connector can be joined with the shrouded banana plugs available in the current probe?

Asked by: praba
Please reach out to the relevant Fluke technical support for your country here: https://www.fluke.com/en-us/support/technical-support.
Answered by: FlukeCorporation
Date published: 2024-03-19
  • y_2024, m_6, d_26, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_3839990956084, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 47.04ms
Rated 5 out of 5 by from Really nice AC-DC Clamp Super nice. Works with any mV meter (1mv=1A) that line up with the banana plugs. Battery operated. Heavy duty Fluke quality.
Date published: 2020-10-25
Rated 5 out of 5 by from Clamp on Good clamp on. Easy to use. I use the i410 to measure current on my 287 logging meter.
Date published: 2020-10-21
Rated 5 out of 5 by from Been great for automotive applications I use this with my 88V Automotive DMM, and so far it has worked perfectly with automotive applications, checking current on alternators and starters, and i've even used it for AC current measurements around the house, and it matches what i get with my other AC-only clamp meter.
Date published: 2020-10-06
Rated 5 out of 5 by from Alternator/Regulator Test using Fluke i410. Works well... along with my Fluke 88V Automotive Multimeter.
Date published: 2020-05-29
Rated 1 out of 5 by from Does Not Work Bought to use with my new 87 V. Brand new out of the box it will not work. Read manual. Contacted Fluke. No change. I love Fluke. This is beyond disappointing. I cannot recommend you purchase this item. Does not work.
Date published: 2019-06-20
Rated 1 out of 5 by from Not good I tried to zero it didn't work, used with Fluke 289 measures randomly. one measurement reads correctly next time huge error.
Date published: 2018-08-22
Rated 1 out of 5 by from Lack of resolution and reliability. Broke this sucker out to test current on an A/C heater line, should be reading between 1 and 4 Amps, nope, too low to measure. It's not like I wasn't using a Fluke 87 while I was taking the measurement. I placed our standard non contact on the same line and got the reading I was looking for. The i410 jumped at first when I hit the little green button (btw, that is stupid, give me a switch, I've only got so many hands) but immediately dropped to zero. Removed it, re-zeroed (it hadn't moved) and tried again, no dice. I seldom need to read in the range this thing might be accurate within. I'm starting to question Fluke's commitment to quality products and have half a mind to send this thing to AvE for a tear down of it. Gabbage. Going to put it in the art bin at work and see if I can't get hold of something a little less finicky with the resolution I need. Neat idea, don't know why more people don't know you can use the voltage settings on their meters, done it before, of course calibrating a loop of wire can be a pain in the dingus end. Giving this a 5/5 for reliability, it reliably told me nothing of use. Will not be purchasing more Fluke anyway.
Date published: 2018-06-14
Rated 5 out of 5 by from Great amp clamp great amp clamp only drawback is it doesn't read below 4 amps. But then again it's for higher measurements. I'm an industrial electrician. But I have had fun using it on Automobiles starters. Checking compression !
Date published: 2015-02-14
  • y_2024, m_6, d_27, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_9
  • loc_en_US, sid_3839990956084, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 22.21ms
Please enable cookies to view product reviews.