Fluke 376 True RMS AC/DC Clamp Meter with iFlex®
Fluke 376 True RMS AC/DC Clamp Meter with iFlex® is rated out of 5 by 19.
Key features
- iFlex® Flexible Current Probe expands the measurement range to 2500 A AC
- CAT IV 600 V, CAT III 1000 V
- True RMS AC voltage and current for accurate measurements on non-linear signals
- Min, max, average and Inrush recording to capture variations automatically
- Integrated low pass filter and state-of-the-art signal processing allows for use in noisy electrical environments while providing stable readings
- Proprietary Inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
- Ergonomic design fits in your hand and can be used while wearing protective equipment
- Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
- Three-year warranty
- Soft Carrying Case
Product overview: Fluke 376 True RMS AC/DC Clamp Meter with iFlex®
Expand Your Measurement Range with Increased Flexibility
You can measure around awkward sized conductors with the Fluke 376 True RMS Clamp Meter with iFlex®, expanding your measurement range to 2500 A AC. With True RMS voltage and current measurements, the Fluke 376 can read up to 1000 V and 1000 A in both AC and DC modes.
The Fluke 376 is the direct replacement for the Fluke 337 Clamp Meter.
Safety Conformance
EN/IEC 61010-1:2001; 1000V CAT III, 600V CAT IV
Specifications: Fluke 376 True RMS AC/DC Clamp Meter with iFlex®
| Electrical Specifications | ||||
| AC Current via Jaw | ||||
| Range | 374 and 375 376 | 600.0 A 999.9 A | ||
| Resolution | 0.1 A | |||
| Accuracy | 2% ± 5 digits (10-100 Hz) 2.5% ± 5 digits (100-500 Hz) | |||
| Crest Factor (50/60 Hz) | 3 @ 500 A (375 and 376 only) 2.5 @ 600 A 1.42 @1000 A (376 only) Add 2% for C.F. > 2 | |||
| AC Current via Flexible Current Probe | ||||
| Range | 2500 A | |||
| Resolution | 374 and 375 | 0.1 A (≤ 600 A) 1 A (≤ 2500 A) | ||
| 376 | 0.1 A (≤ 999.9 A) 1 A (≤ 2500 A) | |||
| Accuracy | 3% ±5 digits (5 – 500 Hz) | |||
| Crest Factor (50/60Hz) | 3.0 at 1100 A (375 and 376 only) 2.5 at 1400 A 1.42 at 2500 A Add 2% for C.F. > 2 | |||
| Distance from Optimum | i2500-10 Flex | i2500-18 Flex | Error | |
 | A | 0.5 in (12.7 mm) | 1.4 in (35.6 mm) | ± 0.5% |
| B | 0.8 in (20.3 mm) | 2.0 in (50.8 mm) | ± 1.0% | |
| C | 1.4 in (35.6 mm) | 2.5 in (63.5 mm) | ± 2.0% | |
| Measurement uncertainty assumes centralized primary conductor at optimum position, no external electrical or magnetic field, and within operating temperature range. | ||||
| DC Current | ||||
| Range | 374 and 375 376 | 600.0 A 999.9 A | ||
| Resolution | 0.1 A | |||
| Accuracy | 2% ± 5 digits | |||
| AC Voltage | ||||
| Range | 374 and 375 376 | 600.0 V 1000 V | ||
| Resolution | 374 and 375 376 | 0.1 V 0.1 V (≤ 600.0 V) 1 V (≤ 1000 V) | ||
| Accuracy | 1.5% ± 5 digits (20 – 500 Hz) | |||
| DC Voltage | ||||
| Range | 374 and 375 376 | 600.0 V 1000 V | ||
| Resolution | 374 and 375 376 | 0.1 V 0.1 V (≤ 600.0 V) 1 V (≤ 1000 V) | ||
| Accuracy | 1% ± 5 digits | |||
| mV dc | ||||
| Range | 375 and 376 | 500.0 mV | ||
| Resolution | 0.1 mV | |||
| Accuracy | 1% ± 5 digits | |||
| Frequency via Jaw | ||||
| Range | 375 and 376 | 5.0 - 500.0 Hz | ||
| Resolution | 0.1 Hz | |||
| Accuracy | 0.5% ± 5 digits | |||
| Trigger Level | 5 – 10 Hz, ≥10 A | |||
| 10 – 100 Hz, ≥5 A | ||||
| 100 – 500 Hz, ≥10 A | ||||
| Frequency via Flexible Current Probe | ||||
| Range | 375 and 376 | 5.0 - 500.0 Hz | ||
| Resolution | 0.1 Hz | |||
| Accuracy | 0.5% ± 5 digits | |||
| Trigger Level | 5 – 20 Hz, ≥ 25 A | |||
| 20 – 100 Hz, ≥ 20 A | ||||
| 100 – 500 Hz, ≥ 25 A | ||||
| Resistance | ||||
| Range | 374 375 and 376 | 6000 Ω 60 kΩ | ||
| Resolution | 374 | 0.1 Ω (≤ 600 Ω) 1 Ω (≤ 6000 Ω) | ||
| 375 and 376 | 0.1 Ω (≤ 600 Ω) 1 Ω (≤ 6000 Ω) 10 Ω (≤ 60 kΩ) | |||
| Accuracy | 1% ± 5 digits | |||
| Capacitance | ||||
| Range | 1000 μF | |||
| Resolution | 0.1 μF (≤ 100 μF) 1 μ F (≤ 1000 μF) | |||
| Accuracy | 1% ± 4 digits | |||
| Mechanical Specifications | ||||
| Size (L x W x H) | 246 mm x 83 m x 43 mm | |||
| Weight | 388 g | |||
| Jaw Opening | 34 mm | |||
| Flexible Current Probe Diameter | 7.5 mm | |||
| Flexible Current Probe Cable Length (head to electronics connector) | 1.8 m | |||
| Environmental Specifications | ||||
| Operating Temperature | 10°C – +50°C | |||
| Storage Temp | -40°C – +60°C | |||
| Operating Humidity | Non condensing (< 10 –°C) ≤ 90% RH (at 10°C – 30°C) ≤ 75% RH (at 30°C – 40°C) ≤ 45% RH (at 40°C – 50°C) | |||
| Operating Altitude | 3000 meters | |||
| Storage Altitude | 12,000 meters | |||
| EMC | EN 61326-1:2006 | |||
| Temperature Coefficients | Add 0.1 x specified accuracy for each degree C above 28°C or below 18°C | |||
| Safety Specifications | ||||
| Safety Compliance | CAN/CSA-C22.2 No. 61010-1-04 ANSI/UL 61010-1:2004 ANSI/ISA-61010-1 (82.02.01):2004 EN/IEC 61010-1:2001 to 1000V Measurement Category (CAT) III 600V Measurement Category (CAT) IV Pollution Degree 2 EN/IEC 61010-2-032:2002 EN/IEC 61010-031:2002+A1:2008 | |||
| Agency Approvals | ||||
| Batteries | 2 AA, NEDA 15A, IEC LR6 | |||
Models: Fluke 376 True RMS AC/DC Clamp Meter with iFlex®
Fluke 376
Fluke 376 True RMS AC/DC Clamp Meter with iFlex®
Includes:
- 18-inch iFlex® Flexible Current Probe
- Coated Instruction Card
- Safety Information Sheet
- Soft Carrying Case
- TL75 Test Leads
- Two AA Alkaline Batteries
Reviews: Fluke 376 True RMS AC/DC Clamp Meter with iFlex®
Rated 5 out of 5 by Genry Garcia from Great Product I purchased my Fluke 376 about 2 years ago and this is without a doubt the single toughest meter I've ever owned. Great product!
Date published: 2016-12-08
Rated 5 out of 5 by Wrayman from Best all around clamp meter This unit does it all. AC/DC Amps and extended capabilities with the iFlex. I use it for HVAC work, serves me well. Traditional Fluke quality insures this meter is there when you need it.
Date published: 2016-12-07
Rated 5 out of 5 by Brad from Best all around meter ever. Great meter. I like having the ability to read DC current for our DC motors. Also the ability to read capacitance on capacitor and mili-volts DC make this this the best meter ever. The only down side is that it doesn't support Fluke connect.
Date published: 2015-05-23
Rated 5 out of 5 by Bryce from Great all purpose meter Great meter like all the rest of the Fluke line
I do wish the Clamp meters had a way of sticking the meter on the side of equipment while trouble shooting like the multi meters
Date published: 2014-02-06
Rated 4 out of 5 by Canadiansparky from Awesome meter, cheap leads I bought this meter to replace a failing Greenlee meter. I went with fluke because every fluke owner I talked to was happy and were still using the same fluke they had started with. they had more than one but I haven't heard of any failures. The same cannot be said for Klein, Greenlee, ideal, etc...
This meter was quite a bit more but is more capable in every aspect. I only keep one meter with me now because this meter covers just about any day to day problem.
The only disappointment I had was that the stock leads seem very cheap and are always twisted up. I bought the silicone twist guard leads that are much better. The 376 has a wider case than other models so the twist guard leads fit ok in the case. If you have a narrower case then you'll need to unplug them every time because the strain relief boots are too long.
Overall quality is excellent and I'm very glad I spent the extra money.
Date published: 2013-10-27
Rated 5 out of 5 by JLIndab from The Fluke Testers Helps so much in my Field of Expertise When it comes to Fluke I am proud that I had a great commitments on all tasks orders that I handle power plants. The most amazing product which I really loved is the FLUKE Clamp Earth Tester. So Amazing that you don't need to pull and stick to the ground, those oldies type of Potential Method Tester with 3 Probe. You just simply insert or clamp direct to the E-Rod or to the BC- Wire. Then it gives your resistance demand or requirements.
Date published: 2013-05-24
Rated 5 out of 5 by JLIndab from The Fluke Testers Helps so much in my Field of Expertise When it comes to Fluke I am proud that I had a great commitments on all tasks orders that I handle power plants. The most amazing product which I really loved is the FLUKE Clamp Earth Tester. So Amazing that you don't need to pull and stick to the ground, those oldies type of Potential Method Tester with 3 Probe. You just simply insert or clamp direct to the E-Rod or to the BC- Wire. Then it gives your resistance demand or requirements.
Date published: 2013-05-24
Rated 5 out of 5 by Beng5 from Great upgrade for 337 You don't need to bring your MultiMeter, all you need it this 1 amazing 376, you have up to 60Kohms, Capacitance and Frequency on Clamp .. what else you need? maybe scope meter.
Date published: 2013-05-21