English

Fluke PRV240FS Proving Unit: Test Voltage Indicators

Fluke PRV240FS Proving Unit: Test Voltage Indicators is rated 4.4 out of 5 by 5.
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 23.24ms
  • REVIEWS, PRODUCT
  • Fluke PRV240FS Proving Unit - 1
  • Fluke PRV240FS Proving Unit - 2
  • Fluke PRV240FS Proving Unit - 3
  • Fluke PRV240FS Proving Unit - 4

Key features

  • Prove operation of FieldSense function on T6 electrical testers
  • Reduce risk of shock and arc flash by validating tool operation
  • Source both AC and DC steady-state voltage (240 V AC/DC)

Product overview: Fluke PRV240FS Proving Unit: Test Voltage Indicators

Designed for safety and compliance

Verify your test tool works without unnecessary exposure to shock and arc flash. Make the process easy by using the PRV240FS Proving unit. Verifying that your T6 electrical tester is working properly reduces the need for personal protective equipment (PPE) when a known voltage source is not available for verification before tests are performed. (PPE is still needed for absence of voltage testing when appropriate).

On the PRV240FS, a single switch and a set of LEDs indicate functionality of both standard AC and DC measurements with test leads, and FieldSense, “no-test-lead” voltage measurement capability. This unit is a simple-to-use solution for complying with verification procedures of your test tools.

The PRV240FS also provides AC and DC voltages for all high impedance instruments in your toolbox. When paired with the included TPAK magnetic hanging strip and the long battery life, including this proving unit in your toolbox is an easy decision. The PRV240FS will last for 2000 tests per set of four AA batteries, with a 10-second test average.

“Test Before Touch”

Fluke’s PRV240FS allows you to “Test Before Touch” (TBT), which involves testing your T6 against a known live source before, and after, the actual measurement. This sequence verifies that your test tool is operating properly during the actual measurement.

Voltage is sourced through a central hub designed to test the T6 FieldSense open fork, as well as through recessed contacts that are activated when test probes are inserted to avoid accidental contact. The PRV240FS has been tested and includes a IEC61010-1, IEC61010-2-030 safety rating.

Specifications: Fluke PRV240FS Proving Unit: Test Voltage Indicators

Specifications
Output voltage240 V ac rms or dc± 10 % ≥ 1 MΩ
LED power indicatorTurns on when output voltage is present
Battery4 x AA Alkaline batteries NEDA 15 A IEC LR6
Battery life1100 (10-second duration) test cycles with >1 MΩ load
Operating temperature-10 °C to +50 °C
Operating humidity0 % to 90 % (0 °C to 35 °C)0 % to 70 % (35 °C to 55 °C)
Operating altitude2000 m
Dimensions11.7 cm x 7.4 cm x 4.5 cm (4.6 in x 2.9 in x 1.75 in)
Weight0.32 kg (12 oz) includes batteries
SafetyIEC61010-1, IEC61010-2-030
WarrantyOne-year
Electromagnetic Compatibility (EMC)IEC 61326-1: Controlled Electromagnetic Environment
CISPR 11: Group 1, Class A
Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself.
Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low voltage power supply network that supplies buildings used for domestic purposes. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances.
Caution: This equipment is not intended for use in residential environments and may not provide adequate protection to radio reception in such environments.
Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object.
US (FCC)47 CFR 15 subpart B, this product is considered an exempt device per clause 15.103
Korea (KCC)Class A Equipment (Industrial Broadcasting & Communication Equipment)
Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.
This product meets requirements for industrial (Class A) electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.

Does this unit work with T5 testers as well?

Asked by: Dfresh5
  • y_2024, m_3, d_12, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_en_US, sid_3739301249076, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 23.06ms
  • QUESTIONS, PRODUCT
Rated 3 out of 5 by from Great Unit but let down by battery drain I have had this unit for well over a year and it’s a great unit but has two design problems that should be addressed. The shallow contact points can result in fiddly activation of voltage measurement if not pressed just right, also the battery drain on this unit is very significant there is a design flaw in the electrical circuit design that results in the battery drain. It’s been discussed in several forums. See three-phase assessment on his YouTube channel.
Date published: 2021-05-08
Rated 5 out of 5 by from Easy to Use Very happy with this product for our Team. fits perfect in fluke 87 bag
Date published: 2019-03-13
  • y_2024, m_3, d_12, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_3, tr_2
  • loc_en_US, sid_3739301249076, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 23.6ms
  • REVIEWS, PRODUCT
Please enable cookies to view product reviews.