English

Fluke i400s AC Current Clamp

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 22.99ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;
  • Fluke i400s AC Current Clamp

Key features

  • Companion to your scope or power quality meter to measure up to 400 A AC
  • Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
  • Specially designed to offer maximum utility in a compact shape
  • Take accurate current readings without breaking the circuit
  • Soft non-slippery overmold handle
  • Optional PM9081/001 BNC/Banana adapter for DMM's
  • Two ranges: 40 A and 400 A, 10 and 1 mV/Amp output
  • Max. conductor Ø 32 mm

Product overview: Fluke i400s AC Current Clamp

Fluke current clamps extend the current ranges of digital multimeters, power quality analyzers, and portable oscilloscopes and are available for both AC and AC/DC environments. The Fluke i400s is specially designed to offer maximum utility in a compact shape and is the only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating.

Specifications: Fluke i400s AC Current Clamp

Specifications
Nominal current range40 A Range0.5 A to 40 A
400 A Range5 A to 400 A
Basic accuracy40 A Range2% + 0.015 A (45-400 Hz)
400 A Range2% + 0.04 A (45-400 Hz)
Phase shift40 A Range
0.5 to 1 AUnspecified
1 A to 5 A
5 A to 10 A
10 A to 20 A
20 A to 40 A
40 A to 400 ANA
400 A Range
0.5 to 1 ANA
1 A to 5 ANA
5 A to 10 AUnspecified
10 A to 20 A
20 A to 40 A
40 A to 400 A1.5°
Typical bandwidth40 A Range5 Hz - 10 kHz
400 A Range5 Hz - 10 kHz
Output level(s)40 A Range10 mV/A
400 A Range1 mV/A
Crest factor40 A Range≤ 3
400 A Range≤ 3 to 300 A
 ≤ 2.5 to 400 A
Safety Specifications
SafetyCAT IV, 600 V, CAT III, 1000 V
Maximum non-destructive current1000 V AC
Mechanical and General Specifications
Warranty1 year
Maximum conductor size32 mm (1.25 inches)
Output cable length2.5 m (8.2 ft)
BNC adapterYes
Dimensions150 x 70 x 30 mm
Weight114 g

Models: Fluke i400s AC Current Clamp

Fluke i400s
Buy it

Please specify whether your clamps are toroidal or non toroidal. I work in calibration and this would be good to know by easily showing it in your specs, thank you!

Asked by: chnsm001

Mentioned 400Amps is RMS or Peak?

Asked by: sathish

Hi! I bought this i400E for my Fluke 116 but I cannot get it to work... The specs for the i400E say it's compatible with digital multimeters that have standard input jacks and mV AC function. The 116 has both of these. Am I missing a hidden detail?

Asked by: Toby
  • y_2024, m_2, d_8, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.37
  • cp_1, bvpage1
  • co_hasquestions, tq_3
  • loc_en_US, sid_3839990693940, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 23.14ms
  • QUESTIONS, PRODUCT
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 23.82ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
Please enable cookies to view product reviews.