Fluke i30 AC/DC Current Clamp

Fluke i30 AC/DC Current Clamp is rated 4.0 out of 5 by 1.
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 24.18ms
  • Fluke i30 AC/DC Current Clamp

Key features

  • Current clamp based on Hall Effect technology that measures both DC and AC current
  • Includes banana plug end for compatibility with multimeters
  • Current range: 30 mA to 30 A DC, 30 mA to 20 A AC rms
  • Frequency range: DC to 20 kHz (-0.5 dB)
  • CAT III 300 V safety rating

Product overview: Fluke i30 AC/DC Current Clamp

The i30 current clamp is based on Hall Effect technology for use in measurement of both DC and AC current. The i30 may be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive current measurement.

Useful resources and rugged tools for Solar professionals

Specifications: Fluke i30 AC/DC Current Clamp

Electrical Specifications
Specified current range30 mA to 30 A DC, 30 mA to 20 A AC rms
Usable current range5 mA to 30 A DC, 30 mA to 20 A AC rms
Crest Factor1.4 in
Output sensitivity100 mV/A
Accuracy (at +25°C)DC ±1 % of reading ±2 mA
AC ± 0.5 dB of reading ±2 mA
Resolution±1 mA
Load impedance> 10 k Ohms and ≤ 100pF
Conductor position sensitivity±1% relative to center reading
Frequency rangeDC to 20 kHz (-0.5 dB)
Temperature coefficient±0.01% of reading/°C
Power supply9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator
Working voltage (see Safety Standards section)300 V AC rms or DC
General Specifications
Maximum conductor size19 mm diameter
Output connection4 mm safety connector
Output zeroManual adjust via thumbwheel
Cable length1.5 meters
Operating temperature range0°C to +50°C
Storage temperature range (with battery removed)-20°C to +85°C
Operating humidity15% to 85% (non-condensing)
Weight250 g
SafetyIEC 61010-1, Pollution Degree 2
IEC 61010-2- 032: CAT III 300V
Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc andfrequencies below 1 kHz.
EMC CompatibilityIEC 61326-1: Portable Electromagnetic Environment

Models: Fluke i30 AC/DC Current Clamp

Fluke i30

AC/DC Current Clamp

Buy it
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 24.18ms
  • bvseo-msg: HTTP status code of 404 was returned;
Rated 4 out of 5 by from i30 Suited from DC to 100 kHz The i30 clamp-on current probe is well suited from DC up to 100 kHz. Unfortunately, the current-to-voltage transfer function increases again at higher frequencies due to capacitive coupling to the metal core of the clamp. Grounding this metal improved also the noise coupled into the clamp when laying next to an interference source
Date published: 2013-10-14
  • y_2024, m_7, d_10, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_3739327758388, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 23.47ms
Please enable cookies to view product reviews.