Fluke Networks LinkIQ™ Cable+Network Tester Advanced Kit

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 23.4ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • Fluke Networks LinkIQ™ Cable+Network Tester Advanced Kit
  • Fluke Networks LinkIQ™ Cable+Network Tester
  • Fluke Networks LinkIQ™ Cable+Network Tester
  • Fluke Networks LinkIQ™ Cable+Network Tester
  • Fluke Networks LinkIQ™ Cable+Network Tester

Key features

Check out the LinkIQ Virtual Demo

  • Validate Cable Performance up to 10GBASE-T via frequency-based measurements
  • Get connected switch data rate, switch name, IP address, port number, & VLAN
  • Detect the PoE class (1-8) and power, and perform a load test
  • Test connectivity to TCP/IP network through IP configuration and ping
  • Cable diagnostics including length plus IntelliTone™, remotes 2-8
  • Manage results and print reports from LinkWare™ PC

Product overview: Fluke Networks LinkIQ™ Cable+Network Tester Advanced Kit

The LinkIQ™ Cable+Network Tester is the solution to verify cable performance up to 10G and solve network connectivity problems.

LinkIQ™ validates cable performance using frequency-based measurements to calculate maximum bandwidth (10BASE-T to 10GBASE-T), which ensure that tested links meet performance requirements.

LinkIQ™ also performs ping tests to verify connectivity and provides nearest switch diagnostics including advertised data rate, switch name, IP address, port number and VLAN information, plus PoE testing and load test up to Class 8 (90 W).  Ethernet Alliance PoE Certified for reliable multivendor interoperability.

Additional features include: Cable Toning, Port Blink, Remote Office Locators, and the ability to manage results via LinkWare PC.

Includes LinkIQ™ Main Unit, Remote ID #1-7, RJ45-RJ45 patch cord, AC charger, RJ45/11 universal coupler, IntelliTone(TM) Pro 200 Probe, and duffel bag carrying case.

Specifications: Fluke Networks LinkIQ™ Cable+Network Tester Advanced Kit

FeatureDescription
Languages supported in UIEnglish, German, French, Japanese, Spanish, Thai, Traditional Chinese, Simplified Chinese, Korean, Russian, Italian, Portuguese
Weight1 lbs 6 oz (624g)
BatteryType: Lithium-ion, 3.6 V, 6400 mAh
Life: 8 hours typical
Charge time: 4.5 hours
Charging temperature range: 0 °C to +40 °C
Power AdapterInput: 100 to 240 VAC ±10%, 50/60Hz
Output: 15 VDC, 2 A maximum
Class II
Host InterfaceUSB type C
Display800 x 480 color capacitive multi-touch
Dimensions8.5 in x 4.5 in
Operating Temperature0°C to 45°C
Storage Temperature-10°C to +60°C
Operating Relative Humidity0 % to 90 %, 0°C to 35°C
0 % to 70 %, 35°C to 45°C
Operating Altitude4,000 m
3,200 m with ac adapter
VibrationRandom, 2 g, 5 Hz-500 Hz
Drop1 m drop, 6 sides
 

Active Network Diagnostics

FeatureDescription
Diagnostic ProtocolsLink Layer Discovery Protocol (LLDP)
Cisco Discovery Protocol (CDP)
Fast Link Pulses (FLP)
Internet Control Messaging Protocol (ICMP),
Dynamic Host Configuration Protocol (DHCP)
IP Address SetupLinkIQ address, DNS Server, Gateway for IPv4 or v6 either manually or via DHCP
IP Ping Test ResultsFour response time results for target, DNS Server(s), Gateway, plus average and number lost
Power Over Ethernet CompatibilityEthernet Alliance Certified to IEEE 802.3af/at/bt,
Hardware negotiation with signature resistance,
Software negotiation with LLDP/CDP
Power Over Ethernet MeasurementsLoaded Voltage (V)
Loaded Power (W)
Port BlinkBlink the light of the connected port
 

Cable Test Specifications

FeatureDescription
Test PortShielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs.
Commissioning Autotests10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire map Only.
Test Speed: 6 seconds for lengths < 70 m
Cable TypesBalanced twisted-pair cabling
Unshielded twisted-pair
Screened twisted-pair
2-pair and/or 4-pair
Wire Map-Only TestsDocument wire map
Length of each pair
Diagnose split pairs
User selectable T568A or T568B
User selectable crossover settings (Straight through, Half-crossover, Full-crossover)
Test speed: 1 second for lengths < 120 m
Length (Maximum)305 m (1000 ft)
Nominal Velocity of Propagation (NVP)User settable
Tone GeneratorGenerates digital tones compatible with Fluke Networks IntelliTone probe.
Generates analogy tones compatible with general analog probes.
Remote ID LocatorsUse remote ID terminations to identify up to 7 unique ports or office outlets

Models: Fluke Networks LinkIQ™ Cable+Network Tester Advanced Kit

LIQ-KIT

LIQ-KIT LinkIQ Cable+Network Tester Advanced Kit


Buy it

Includes:

  • LinkIQ™ Main Unit
  • Remote ID #1-7
  • RJ45-RJ45 patch cord
  • AC charger
  • RJ45/11 universal coupler
  • IntelliTone(TM) Pro 200 Probe
  • Duffel bag carrying case
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 22.45ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 22.09ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
Please enable cookies to view product reviews.