What's in your toolbox? Yuengling Tampa Brewery
Fluke tool | Uses |
---|---|
Fluke thermal imager | Detecting possible problems in motors and mechanical equipment (such as an overheated motor on a spent grain pump). |
Fluke 810 Vibration Tester | Identigying bearing problems in rotation equipment, such as blower motors and pumps. Investigating possible problems detected with the thermal imager. |
Fluke 1735 Three-Phase Power Logger | Comparing current draw against rotational speed and output pressure on positive displacement pumps to help verify bearing problems detected with a Fluke 810 Vibration Tester. |
Fluke 9040 Phase Rotatio Indicator | Verifying correct connections in three-phase systems. |
Fluke 744 Documenting Process Calibrator | Verifying the performace of temperature and pressure measurement instruments. Viewing and changing device parameters in HART-compatible instruments. |
Fluke 707 Loop Calibrator | Verifying that analog PLC cards are reading signals and working properly. |
Fluke 700PTP-1 Pneumatic Test Pump | Delivering air at known pressure to calibrate instruments and sensors. |
Fluke 322 Clamp Meter | Checking current draw and power consumption. |
Fluke 771 Milliamp Process Clamp Meter | Checking instrument and control signals without breaking the circuit or interrupting the process. |
Fluke i3000s Flex AC Current Clamp | Measuring currents of up to 1,500 amps through any leg of a substation. |
Fluke Networks test tools | Testing and repairing the Ethernet network that links 60 programmable logic controllers (PLCs) in the brewery. |