Fluke Networks Pro3000F50-KIT Tone Generator and Filtered Probe
Key features
- Innovative filtered probe obstructs signal of 50 Hz interference
- Analog tone generator with bed-of-nails clips
- Send tone signal up to 16 km on most cables
- SmartTone™ provides 5 distinct tones for exact pair identification
- Powerful speaker makes tracing cables quick and easy
Sale ends soon.
Shop now!
DAYS
HR
MIN
SEC
In stock
A$411.40
Tax included where applicable
Product overview: Fluke Networks Pro3000F50-KIT Tone Generator and Filtered Probe
The Pro3000F filtered probe, 50 Hz, “Stops the Buzz” by obstructing signal interference and unfiltered toner, for use on inactive networks, uses SmartTone™ technology, with five different tones to allow the technician to easily identify individual pairs.
Specifications: Fluke Networks Pro3000F50-KIT Tone Generator and Filtered Probe
| Pro3000 Analog Toner Specifications | |
|---|---|
| User interface | Slide switch selects Continuity or Tone Mode Push button switch selects SOLID, ALT or OFF Tone mode LED Continuity/Polarity LED |
| Solid Frequency | 1000 Hz nominal |
| Alternating Frequency | 1000/1500 Hz nominal |
| Over Voltage Protection | 60 Vdc in Toner/Polarity Mode |
| Output Power in Tone Mode | 8 dbm into 600 ohms |
| Output Voltage Level in Continuity Mode | 8 Vdc with fresh battery |
| Battery | 9V alkaline |
| Temperature | Operating: -20° C to 60° C, Storage: -40° C to 70° C |
| Case dimensions | 2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm) |
| Pro3000 Analog Probe Specifications | |
|---|---|
| User interface | ON/OFF push button Volume dial Replaceable tip 3.5 mm earphone jack |
| Battery | 9V alkaline |
| Temperature | Operating: -20° C to 60° C, Storage: -40° C to 70° C |
| Case dimensions | 9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm) |
Models: Fluke Networks Pro3000F50-KIT Tone Generator and Filtered Probe
PRO3000F50-KIT
Fluke Networks Pro3000F50-KIT Tone Generator and Filtered Probe
Fluke Networks Pro3000F50-KIT Tone Generator and Filtered Probe