HVAC tools

The Fluke AC288 Terminal Block Probe features a retractable probe tip that provides safe and secure connections to clamp and screw type terminal blocks.

Adapts Type-K thermocouple mini-connector to dual shrouded banana plug inputs, measurement range and accuracy: probe dependent, suitable for low voltage applications(below 30 V AC, 60 V DC).

Type-K thermocouple with standard shrouded banana jack, compatible with DMMs with temperature measurement functions.

Isothermal screw terminal for J wire, suitable for up to 20 gauge thermocouple wire.

Isothermal screw terminal for K wire, suitable for up to 20 gauge thermocouple wire.

The 80K-15 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 15,000 volts peak AC or DC Overvoltage Category I.

The 80K-40 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 volts peak AC or DC Overvoltage Category I.

The 80K-6 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 6000 volts peak AC or DC Overvoltage Category I.

Type-K thermocouple for general purpose applications, measurement range: -40 to 260 °C.

Designed for hands free measurement of HVAC temperature measuring applications, use multiple and leave in place for route based routine maintenance.

Type-K thermocouple for use in liquids and gels, measurement range: -40 to 1090 °C.

Type-K thermocouple for use in air and non-caustic gas measurements, bead protected by perforated baffle.

Type-K thermocouple suitable for food industry, liquids and gels, measurement range : -40 to 260 °C.

Type-K thermocouple with tapered tip for use in air, non-caustic gas and surface applications, measurement range: -40 to 816ºC.

Type-K thermocouple for surfaces in rugged environment, durable ribbon sensor, measurement range: -127 to 600°C.

Type-K thermocouple surface, air and non-caustic gases

The 80PR 60 probe expands the utility of your RTD non-contact infrared thermometer by allowing you to take contact temperature readings.

The 85RF High Frequency Probe is designed to convert a DC voltmeter with a input impedance of 10M ohms into a high frequency (100 kHz to 500 Mhz) RF voltmeter.

Set of three safety designed insulated Probe Tip Alligator Clips.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

One pair (red, black) of flat, right angle design for connecting to bus bars.

Single probe pierces 0.25 to 1.5 mm insulated wire.

Probe accessory set for usage with VPS200 and PM8918 series scope probes.

Probe Accessory Set for usage with VPS200 & PM8918 Series Scope Probes.

Tough polyprophylene case.

The hard case that fits all Fluke Industrial Test Tools. Configure the diced foam interior to store and protect what you need to carry with you.

Includes two padded pockets for protection of two test tools, such as a digital multimeter and 60 Series IR thermometer and a pouch for test leads and other accessories.

Zippered case with detachable pouch | Fluke C125

Zippered carrying case with durable vinyl exterior, has belt loop and an inner pocket to store test leads or small accessories.

Zippered carrying case with durable vinyl exterior.

Case top opens laterally to allow use of test tool without removing it from the case and includes a strap to secure the test tool.

Zippered carrying case with inside pocket belt loop and inside meter strap.

Oiled genuine top grain cowhide, rugged construction with heavy duty stitching and reinforced rivets, large tool belt loop and top flap to secure meter.

Tough polyprophylene case. Accessories and manual compartments. Detachable lid. One year warranty.

Zippered carrying case with inside pocket and belt loop.

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof.

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof.

Expand the power of the world's most rugged, accurate handheld test tools with FlukeView® Forms Documenting Software.

Fabric holster absorbs shocks and protects meter from rough handling, built-in pocket for lead storage, convenient belt-loop with snap.

Durable nylon construction protects your thermometer while keeping it within reach, cuff hook attachment closure provide quick access and a secure closure.

Now 80 Series owners can benefit from the Fluke Magnetic Hanging System. The easy-to-clean, snap-on holster absorbs shocks and protects your DMM, and is especially designed to hang from just about any metal surface.

Heavy duty construction with mounting holes

Fluke i400 AC current clamps extend the use of digital multimeters. Get a single range 400 A AC clamp in a compact shape.

Small, rugged light easily attaches to any Fluke test probe, bright white LED illuminates contact area, frees both hands for work.

Attach it to a hard hat, a baseball hat, or even a panel door for all the light you need.

Powerful, lightweight, mini-Xenon worklight shines right where you're working. Comes with Limited Edition Fluke Collector's Cap.

Set consists of: 4 Mini Testhooks, 2 red, 2 gray.

Contains replacement parts for usage with the VPS200 & PM8918 Scope Probes.

FlukeView software adds PC power to your Fluke ScopeMeter test tool

Twist. Test. The Fluke TL175 TwistGuard™ Test Leads with retractable, adjustable length test tips. Test leads as tough as your meter.

This test lead set with test probes works in multiple electrical applications. SureGrip™ feature is designed to do your work with comfort.

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

Includes 3 test lead accessories in an all-in-one set. Ideal starter kit for electrical applications.

These insulated test leads provide the convenience and variety for test lead configurations by attaching clips, hooks and grabbers as needed.

An accessory kit especially designed for working in high energy environments.

5 ways to connect

DMM test leads (red, black) with safety shrouded, standard diameter banana plugs

Large jaws, long leads and a piercing needle inside the jaws.

One pair (red, black) of test leads with sharp needle point tips adjustable to desired length from 0 to 76 mm

Provides comfort grip probes with silicone insulated, right-angle test leads. Heat and cold resistant.

The TL75 Hard Point™ Test Lead Set offers the convenience of a test lead and probe-in-one unit with a variety of connections

One pair (red, black) silicone test leads with right angle shrouded 4 mm (0.16 in) banana plugs.

Very small 1 mm tips to access hard to reach test points

3 sets (red and black pairs) of multi-stacking 4 mm banana plug patch cords

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-hooks.

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-pincers.

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and micro-hooks.

Handy all-in-one kit that includes 3 Test Lead Sets.

Special value SureGrip Set for industrial applications.

Includes all the SureGrip™ leads and probes in a handy six-pocket, roll-up pouch, along with TL224 test leads.

Ideal for electronics test and design, this master set includes 11 items in a handy pouch.

Fluke test leads, alligator clips and test probes broaden the ability to take meter measurements in different environments. Buy Online Now.

Set includes three Flexible Socket Probes and a Large Alligator Clip.

Provides firm and secure contact.

Test lead replacement set for the 430 Series Power Quality Analyzer.

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals.

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals.

Slim probe with test button keeps your eyes on the panel while probing hard to reach points.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

Flexible and formable 1-¼ inch pin provides an easy connection past weather pack seals to connector conductors.

Recommended for use with TL222 and TL224

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire.

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding due to design.

Better than a test probe alone – these two inch long rigid back probe pins easily pass between the weather pack seal and wire.

Replacement tips for TL910.

Set of push-on adapters for TL71 and TL75 test probes.

Powerful magnetic hanging strap for multimeters. Use the universal hanger on hook, nail or wire to take measurements hands-free.

TRM50 Coaxial Feed-through BNC male to BNC female Cable Terminator.

When your job depends on every tool in your toolbox, Fluke test leads keep you working. Plated test lead tips stay sharp and accurate.

A kit of 7 mini-plug connectors.

Extending and repairing J-type thermocouple wires, kit includes 3 meters of thermocouple wire and 1 pair of male/female mini-connectors.

Extending and repairing K-type thermocouple wires, kit includes 3 meters of thermocouple wire and 1 pair of male/female mini-connectors.

Extending and repairing T-type thermocouple wires, kit includes 3 meters of thermocouple wire and 1 pair of male/female mini-connectors.

5 pair (red, black) of double 4 mm banana plugs

Draw flue gas samples up to 700ºF (370ºC) reliably for measurement with the Fluke CO-210 Carbon Monoxide probe or Fluke CO-220 Carbon Monoxide meter.

Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals.

Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals.

L210 probe light + probe extenders. Includes L200 probe light and TP280 test probe extenders

Special value combo pairs the new L200 Probe Light with one of the most popular test leads by Fluke and a handy carrying case.

Foldable soft pouch with six pockets and hook-and-loop.

Electricians know that when you are measuring electrical installations there often appears to be a voltage, even if you know the wires are non energized.

Ideal for testing electronic equipment and offers versatility with modular test probes, alligator clips, test clips and more.