Fluke LVD2 Non-Contact Voltage Tester

Fluke LVD2 Non-Contact Voltage Tester is rated 3.3 out of 5 by 24.
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 23.04ms
  • REVIEWS, PRODUCT
  • Fluke LVD2 Non-Contact LED Light Voltage Tester | Fluke
  • Fluke LVD2 Non-Contact LED Light Voltage Tester | Fluke
  • Fluke LVD2 Non-Contact LED Light Voltage Tester | Fluke
  • Fluke LVD2 Non-Contact LED Light Voltage Tester | Fluke

Key features

  • Non-contact AC voltage tester and LED flashlight
  • Detects from 90 to 600 V AC
  • Features dual-sensitivity for two levels of detection
  • Indicates proximity to AC voltage source with blue light
  • Indicates you’re at the source with red light
  • Ultra-bright white LED light with 100,000-hour bulb life
  • Safety rated to CAT IV 600 V
  • Operating temperature 0°C to 50°C
  • AAA battery included

Product overview: Fluke LVD2 Non-Contact Voltage Tester

Fluke LVD2 Volt Light detects voltage without contact

LVD2 volt light, offered by Fluke combines a non-contact AC voltage detector and LED flashlight into one easy to use pen-style design. It features dual sensitivity detection, turning blue from 1” to 5” (2.54 cm to 12.7 cm) from the source and red when at the source. The LVD2 is a CAT IV 600 V rated and is suitable for commercial and industrial applications.

Reviews: Fluke LVD2 Non-Contact Voltage Tester

Rated 5 out of 5 by from Many years of reliable service. I have had my LVD2 for many years. Its been misplaced and dropped a number of times but this simple, low cost device just keeps working. I see a few have made some complaints but I think this pocketable product is spot on. Lose it or break it? Not a big investment so if lost or broken, it is easily replaced at a low cost. Safe to use? Yes but if your working inside a high voltage piece of equipment, use your training to select the best tool for the job to maintain your safe distance. FLUKE could make a night stick sized version with a 20,000 volt shell including a full hand cover-boot with a luggable case. Or just use another instrument that is better suited for the given job. But for fast go-no go checks for a lot of equipment live power checks, this pocketable "tool" is great! I would like to get a replacement power switch-cap. My battery latch is now failing but not complaining given the years of use, dropping, etc. Using an ultra small drill bit, I pinned the cap with a tiny (eye glass hinge screw) phillips head machine. screw through the cap & case. Used mine in industrial systems, imagesetters, computer room electrical and communications equipment.
Date published: 2019-07-30
Rated 5 out of 5 by from EXCELENTE PERFECTA HERRAMIENTA DE TRABAJO A PERPETUIDAD (DISPOSITIVO ETERNO)
Date published: 2018-10-27
Rated 1 out of 5 by from Have to rotate to see if you have voltage I had other fluke voltage testers and this LVD2 model is garbage, When you turn it on and place it near a wire, you may or may not know if there is power there because you have to rotate the unit to see if it lights up, The tip is square but only one side lights up near the handle. Very aggravating. The WHOLE thing SHOULD light up bright RED when there is power! Right now its a dinky LED inside that lights up. WHY is it so hard to make the WHOLE TIP light up at any angle? Right now its just a expensive flashlight! Come on FLUKE, I found this problem in 10 sec's - Don't make garbage light this!!!
Date published: 2018-10-26
Rated 4 out of 5 by from Multi use tool + n safety 1st n last Have worn out a few dropped some yet due value of useful design troubleshooting in dark lot ares or power outage purchase a new one like this compact style yet 4 stars as it could benefit from a more durable housing ☺
Date published: 2016-12-08
Rated 5 out of 5 by from Handy Tool Great product to keep in your pocket. Great for any job!
Date published: 2016-12-07
Rated 5 out of 5 by from Great product! I purchased this for my Maintenance crews for easily identifying wires in the rats nest of boxes we have. Looking forward to the long life use.
Date published: 2016-12-07
Rated 5 out of 5 by from Dont leave home without it I had an older 1 , this new one is easy to find and us,
Date published: 2016-12-07
Rated 5 out of 5 by from Satisfied Customer I've had this device for a few years now. I only use it for home projects and I must say that it is a fantastic tool. It lights the dark corners of my switch boxes and light fixtures. It has never failed to give an accurate "hot" reading. The blue light is a bit unnecessary but who cares really. I don't understand why others give it such a low rating? If the battery dies too soon, well stop forgetting to turn it off when you aren't using it. If the switch keeps breaking, then maybe you are a little too rough with the switch. If you like a sound and a light to indicate a "hot" wire, then maybe you should have purchased a detector that says it has an audible signal. This one clearly doesn't claim to have it. For around the house uses, it's just great. It has never failed and I'm still on the same battery that I put in over two years ago. PS- remove the battery when you store the detector between uses. Every home project which a detector was necessary has been a breeze with this product. Please, if you are looking for a specific tool for a specific job, make sure you purchase the tool that you actually need. This tool was purchased for home use and it's absolutely perfect.
Date published: 2016-08-04
  • y_2019, m_10, d_17, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_24
  • loc_en_US, sid_fluke-lvd2, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 22.95ms
  • REVIEWS, PRODUCT