Type-K thermocouple for flat or curved surfaces such as plates and rollers, measurement range: 0 to...
Adapts Type-K thermocouple mini-connector to dual shrouded banana plug inputs, measurement range and...
Standart korumalı banana fişli K Tipi termokupl, sıcaklık ölçme fonksiyonlu DMM'lerle uyumlu.
Hava, kostik olmayan gaz ve yüzey uygulamalarında kullanım için konik uçlu K tipi termokupl.
Converts a DMM to a thermometer, for use with type-K thermocouples in low voltage applications...
Compatible with Fluke DMMs, high accuracy and fast reading for low voltage (below 24 V AC, 60 V DC)...
Isothermal screw terminal for K wire, suitable for up to 20 gauge thermocouple wire.
HVAC sıcaklık ölçme uygulamaları için elleri kullanmadan ölçüm yapacak şekilde...
Operates with T-type thermometers, measurement range : -196 to 350 °C.
Isothermal screw terminal for J wire, suitable for up to 20 gauge thermocouple wire.
80PR 60 prob, temas sıcaklığı okumaları yapmanızı sağlayarak, RTD temassız infrared...
İkincil PRT, 305 mm x 6,35 mm (12 x 1/4 inç), –200 °C - 420 °CJ son eki = muz tipi fiş...
İkincil PRT, 229 mm x 4,7 mm (9 x 3/16 inç), –200 °C - 300 °CJ son eki = muz tipi fiş...
Her biri 1 metre uzunluğunda bir çift (kırmızı, siyah) silikon test iletkeni seti, aligator...
The 80PK-18 Pipe Clamp Temperature Probe kit combines the standard 80PK-8 pipe clamp with the larger...
A temperature probe is a device used to measure temperature in various environments. It can be attached to a test tool, turning it into a thermometer, suitable for a wide range of temperature readings.
Multimeter probes include standard probes, temperature probes, alligator clips, and specialty probes for specific applications like industrial or automotive use.
Test probes vary in design, including standard probes, hook clips, piercing probes, and temperature probes, each tailored for specific testing needs.
Multimeter probes are connected to a multimeter and then to the test point. The type of probe used depends on the measurement being taken, such as voltage, current, or temperature.
A test lead is a wire or cable used to connect a multimeter or other test equipment to the device or component being tested.
Test leads are used to establish a connection between a multimeter and the test points in a circuit or component for electrical measurements.
A test lead is the cable that connects the measurement instrument to the test point, while a test probe is the point of contact that physically touches the component or circuit for measurement.
A temperature probe is an accessory that allows for accurate temperature measurements in various settings when connected to a test tool.
Temperature probes are used for measuring temperature in different environments, from industrial settings to electronic devices, ensuring precise and reliable temperature readings.