접지

Grouding Blog TOC image

안전 비디오

모든 접지 문서

문서

PV 시스템의 접지 결함에 대한 숨겨진 위험

PV 시스템의 DC 접지 결함이 너무 늦기 전에 감지해야 하는 숨겨진 위험인 이유에 대해 알아보십시오. PV 시스템에서 사각 지대를 찾으십시오. 태양광 접지 결함 문제를 해결하십시오.

문서

GFCI 보호 회로에서 고스트 트립 추적

접지 결함 회로 인터럽트(GFCI)가 필요한 이유 및 GFCI 보호 회로의 문제 해결 방법에 대해 설명합니다.

문서

장비에서 파생되는 구내 시스템

이 "Solid Ground" 칼럼에서는 변압기와 접지를 다룹니다. 몇 가지 정의부터 시작하겠습니다. "배전용" 변압기의 "공식적인" 정의에 대해서는 의견이 분분합니다.

문서

Why grounding is so much more important than most people think

Grounding errors can cause electrical shock, fires, equipment damage, and power quality problems that can cause systems, circuits, and equipment to operate improperly.

문서

Why Ground, Why Test?

Poor grounding contributes to unnecessary downtime, but a lack of good grounding is dangerous and increases the risk of equipment failure. Without an effective grounding system, you could be exposed to the risk of electric shock, not to mention instrumentation errors, harmonic distortion issues, power factor problems and a host of possible intermittent dilemmas. If fault currents have no path to the ground through a properly designed and maintained grounding system, they will find unintended paths that could include people.

문서

Selective Measurement

Selective testing is very similar to the Fall-of-Potential testing, providing all the same measurements, but in a much safer and easier way. This is because with Selective testing, the earth electrode of interest does not need to be disconnected from its connection to the site! The technician does not have to endanger himself by disconnecting ground, nor endanger other personnel or electrical equipment inside a non-grounded structure.

문서

Stakeless Measurement

The Fluke 1625 earth ground tester is able to measure earth ground loop resistances for multi-grounded systems using only current clamps. This test technique eliminates the dangerous, and time consuming activity of disconnecting parallel grounds, as well as the process of finding suitable locations.

문서

Reassessing airport tower lightning protection systems

Reassessing airport tower lightning protection systems with checklist for ensuring reliable lightning protection, with aid of ground resistance

문서

Measuring Ground Resistance

How to measure ground resistance. When conducting a grounding audit of a central office there are three different measurements required.

문서

Grounding Basics

Grounding Basics

문서

Fall-of-Potential Measurement

Fall-of-Potential Measurement

문서

Soil Resistivity Measurement

Soil Resistivity Measurement

문서

Ground testing questions

Earth ground testing definitions and methods: grounding and bonding, purpose of the earth ground, Fall of Potential test, stakeless ground testing

문서

Testing electrical bonds

Expert, Chuck Newcombe, revisits techniques from 1963 for testing the electrical bonds in a grounding system and compares them with today's tools and methods.

문서

Measuring ground loop resistance without stakes

Normal earth ground measurement involves disconnecting parallel grounding rods, "planting" several auxiliary grounding stakes, and using a earth ground tester to calculate the resistance of grounding system electrodes. Sometimes, though, there isn't anywhere to plant the grounding stakes - such as inside a building, at a cell phone substation, or on power pylons. What then?

문서

Earth ground testing for mine sites with Fluke 1625

All mine sites have grounded electrical systems, so that in the event of a lightning strike or utility overvoltage or ground fault, the current would be able to find a safe path to earth or the neutral of the transformer.