Resultados de la búsqueda

Estuche duradero de espuma EVA con bolsillos para transportar de forma segura la mayoría de multímetros y accesorios pequeños

Adquiera el kit de mantenimiento para multímetros industriales Fluke 179 IMSK par el profesional electricista. Incluye la pinza amperimétrica de verdadero valor eficaz Fluke 323, cables de prueba de alto rendimiento, pinzas cocodrilo y sondas de prueba.

Paquete Fluke 393 con medidor de irradiancia solar y cables TLPV para profesionales del sector de la energía solar.

Mejore la detección de fugas para recipientes no presurizados y obtenga una comprobación superior en diversos sectores.

Comprobación sencilla y fiable de cables, redes y Wi-Fi

El medidor láser de distancia Fluke 417D realiza medidas instantáneas de hasta 40 m (165 pies) con solo un botón, basta con apuntar y hacer clic.

Combine la potencia del multímetro para climatización Fluke 116 con un termómetro IR Fluke 62 MAX+ para que pueda resolver los problemas de forma productiva y eficaz.

La combinación de la resolución 260 x 195, la tecnología IR-Fusion® y el enfoque manual entregan imágenes de calidad, lo que hace que la detección de problemas sea más rápida y fácil.

La cámara termográfica Fluke Ti450 con enfoque MultiSharp™ brinda un enfoque de cerca y lejos en una sola imagen. No más preocupaciones por el enfoque; simplemente apunte y dispare.

The Fluke 700SC is used to communicate with the Fluke 726, the Fluke 754, and the Fluke Calibration 3130. It allows you to connect these products to a PC. It also can connect a Fluke Calibration dry-well with a 754.

Diseñado para su uso en el calibrador de temperatura/presión 525A; también apto para el calibrador multiproducto 5520A

Oscilloscope Calibration - 5820A oscilloscope calibrator can calibrate oscilloscope up to 2.1GHz & provides hands free automated calibration. Request a quote today

El Calibrador de potencia eléctrica trifásica 6003A de Fluke Calibration es la manera más rentable de obtener la precisión y el desempeño superiores de tres fases independientes en un instrumento.

Trend Link V10 is a trend display program that works with the Full version of FlukeDAQ 6.0 (2680A-APSW) collecting and displaying data from any combination of Fluke Data Acquisition products.

The Fluke 700SC is used to communicate with the Fluke 726 Precision Multifunction Process Calibrator and the Fluke Calibration 3130 Portable Pressure Calibrator.

Los patrones de calibración de la serie PG7000 se basan en el principio fundamental de la masa cargada en un pistón para aplicar una fuerza conocida a una zona eficaz conocida.

El 8508A ofrece una resolución de 8,5 dígitos, una linealidad excepcional, un ruido y una estabilidad extraordinariamente bajos, lo que en conjunto produce posiblemente las mediciones más exactas de cualquier producto que se encuentre actualmente en el mercado

Además de realizar las calibraciones de comparación, MET/TEMP II también le permite llevar a cabo calibraciones semiautomáticas de punto fijo.

La serie 9640A adopta el papel principal y normalmente reduce a la mitad el costo de un sistema de calibración de RF de alta capacidad.

El 5522A suministra tensión y corriente continuas, tensión y corriente alternas con diversas formas de onda y armónicos, dos salidas de tensión o tensión y corriente simultáneas para simular alimentación CC y CA con control de fase, resistencia, capacitancia, termopares y RTD..

El calibrador 5502E dispone de un amplio rango de salidas en una sola fuente de calibración, entre otras, voltajes CC y CA de hasta 1.020 V, corriente CC y CA de hasta 20,5 A directos o 1.025 A (mediante el accesorio de bobina de corriente de 50 vueltas 5500A/COIL)

El 5520A no se limita al entorno controlado del laboratorio de calibración. Está diseñado para llevarlo allá donde esté el trabajo

El calibrador multifunción de comprobadores eléctricos 5320A es un instrumento exacto y flexible con el que se pueden calibrar con eficacia muchos tipos y modelos diferentes de comprobadores eléctricos.

5500A multi-product calibrator can accurately calibrate digital & analog multimeters, thermometers, wattmeters, data loggers & many other measurement tools.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

5080/CAL es una completa solución de calibración independiente fácil de usar. Los procedimientos se pueden desarrollar rápidamente mediante un diseñador integrado basado en asistentes y controlado mediante menús

El calibrador multiproducto 5502A abarca objetos de carga de trabajo comunes como multímetros digitales de 3,5 y 4,5 dígitos y más.

El 9500B de Fluke Calibration resuelve estos problemas y proporciona una automatización real y completa mediante el uso de los excepcionales Active Head.

Consiga una calibración precisa para osciloscopios de hasta 4 GHz con el Fluke 9500C . Incorpora Active Head Technology™ para una calibración multicanal automatizada y eficiente.

El 792A es un estándar de transferencia térmica de CA/CC de extrema exactitud, diseñado para satisfacer los requisitos de seguimiento de CA más exigentes.

La Fuente de referencia de RF 96270A de Fluke Calibration es el instrumento individual más simple, más preciso, y rentable para calibrar analizadores de espectros, sensores de potencia de RF y más; hasta 27 GHz y más.

La fuente de referencia de RF 96040A de Fluke Calibration le permite simplificar el sistema de calibración de RF al reemplazar muchos de los instrumentos y accesorios que constituyen el sistema actual.

El horno de calibración de termopar 9118A de Fluke Calibration es un horno horizontal, de tubo abierto con un rango de temperatura que va de 300 °C a 1200 °C.

El amplificador de transconductancia 52120A de Fluke Calibration proporciona corriente CC de hasta 100 A y corriente CA de hasta 120 A en precisiones de hasta 140 ppm.

El calibrador multiproducto 5080A calibra con exactitud y fiabilidad su carga de trabajo analógica gracias a su alta conformidad de tensión y corriente.

El panel de visualización del modelo 5690A cuenta con una estructura de menús simple, con teclas multifunción para configurar y programar el sistema de argón

El estándar de medición de CA del 5790B es una medición de CA con fines múltiples y estándar de transferencia diseñada para la mayoría de las aplicaciones de calibración más demandantes.

El SPRT estándar de trabajo 5698 es un SPRT verdadero. Cumple con los requisitos de tasa de ITS-90 para los SPRT e incluye un sensor de platino sin tensión.

Integrate MET/CAL® Calibration Management Software to your workflow with MET/CONNECT™ Calibration Integration Software. Flexibility achieved.

Asistencia para la migración de bases de datos

La variedad de conexiones de entrada le permite escoger la que mejor se adapte a la aplicación. En el 5790A existen cuatro grupos de terminales de entrada, dos conectores de tipo N y dos grupos de bornes de conexión de cinco vías

El conjunto de servopistón del dispositivo PG9602/9607 se basa en más de 15 años de experiencia en el diseño, la fabricación y la calibración de servopistones de 50 mm.

Llame a la línea directa de MET/SUPPORT Gold de lunes a viernes, de 8:00 a.m. a 4:30 p.m., en horario del Pacífico (EE. UU., Canadá, México, Sudamérica y Centroamérica) o GMT (Europa) para hablar con uno de nuestros expertos en software altamente cualificados

El software MET/CAL es una solución reconocida para automatizar la calibración eléctrica. Sin embargo, MET/CAL también es la solución ideal para algunas calibraciones de RF, incluida la calibración del analizador de espectro.

Si quiere una capacidad real de obtener patrones de temperatura primarios, querrá celdas de punto de congelación metálicas que estén muy cerca de la temperatura de congelación teórica y que ofrezcan mesetas que sean estables y duraderas.

El 5700A y el 5720A son calibradores multifunción de cinco funciones diseñados para satisfacer las cargas de trabajo de calibración eléctrica más exigentes.

El software de administración de recursos de calibración MET/TEAM realiza un seguimiento del recorrido de los instrumentos en la empresa, el laboratorio de calibración y el departamento de gestión de calidad.

Con el 6105A y el 6100B se obtienen las señales necesarias para que los procesos descritos anteriormente se puedan llevar a cabo con eficacia, rapidez y mediante operarios menos calificados.

The Fluke Calibration 732B provides ultra-stable 10V, 1V, and 0.1V outputs for precise voltage reference and electrical calibration.

El software MET/TEMP II le permite automatizar fácilmente la calibración de varios sensores de temperatura.

Optimize Solar Performance: PVA-1500HE2 PV Analyzer & 1537 Insulation Tester 2500V

Fluke DAQ es un poderoso software de configuración y aplicación que maneja los productos de adquisición de datos NetDAQ y la serie 2680.

COMPASS® for Pressure es una plataforma universal para todas sus necesidades en materia de software de calibración de la presión.

Dear Customer, Thank you for registering your product(s) as part of our product safety recall of your FLUKE-17XX, Flat Cable, Voltage Test Lead 3-phase+N (Recalled Cable). We have received your information, and your order is in process. We will soon be sending you a cable replacement to correct your Recalled Cable(s). A Fluke representative may contact you shortly if more information is needed. Please accept our most sincere apologies for any inconvenience caused by this action and should you have...

MET/CONNECT v 2.2.0 with MET/CAL v 11.1.0 (2.1 GB)   Document(s): MET/CONNECT 2.2.0 ReadMe (154.98 KB) MET/CAL 11.1.0 ReadMe (450.51 KB) MET/CONNECT Installation Guide (722.31 KB) MET/CONNECT API Reference (825.91 KB) Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 2.2.0 and MET/CAL version 11.1.0 release is an update to previous MET/CONNECT and MET/CAL software. This update includes new features, bug fixes, and minor updates.This installer can...

DH Instruments pressure and flow calibration is part of Fluke CalibrationDH Instruments (DHI) was founded in 1980 with one objective: to provide superior calibration solutions through innovative technology, first rate service, and uncompromisingly metrological integrity.  Now, under the Fluke Calibration name, those values and the DH Instrument commitment to excellence remain the same.DH Instruments customers include metrologists, engineers, technicians, researchers, and quality professionals worldwide...

Hart Scientific temperature calibration is part of Fluke CalibrationHart Scientific has been a member of the metrology community for over 30 years. Now, under the Fluke Calibration name, it continues to be a leading manufacturer of temperature calibration and measurement equipment. Our experience in temperature calibration goes back 30 plus years and, as Fluke Calibration, we will still be here 30 years from now.Our customers include metrologists, engineers, technicians, researchers, and quality...

Ruska pressure calibration is part of Fluke CalibrationRuska has been a leading global manufacturer of pressure calibration instrumentation since 1944. Now, as part of Fluke Calibration, Ruska continues to offer highly accurate primary pressure standards, transfer standards, and air data test sets. Every Ruska instrument undergoes a battery of tests to make sure it meets or exceeds its performance parameters. An accredited calibration report comes with every instrument.How Ruska products fit within...

Pressurements pressure calibration is part of Fluke CalibrationPressurements pressure calibration products, originally from Pressurements, Ltd in the United Kingdom, include a comprehensive series of instruments for the accurate measurement of pressure. Versatile, easy to use, and extremely accurate, these instruments include hydraulic deadweight testers and combined pressure and vacuum deadweight testers. In addition, Pressurements comparison test pumps are also now manufactured and sold through...

Pressure is a sophisticated measurement discipline. But Fluke Calibration has the experts—and the best-engineered product solutions—and we can answer all your questions.

Fluke Calibration ya está disponible en fluke.com. Hemos realizado varias actualizaciones importantes para mejorar la experiencia del cliente y la calidad del servicio. Los cambios clave incluyen:1. Registro en MET/SUPPORT Gold: Para beneficiarse plenamente de su cuenta de MET/SUPPORT Gold, debe registrarla en fluke.com. Este proceso requiere su PIN y su número de MET/SUPPORT Gold, que se proporcionan por correo electrónico después de la compra. El registro otorga acceso a asistencia técnica...

Hi, this is Jeff Grossman, Sales Engineer for Fluke Calibration’s pressure and mass flow calibration solutions, here to provide you with a demonstration of one of our three modular pressure controllers. I happen to have here the 8270A which has a maximum pressure of 6000 psi complemented by the 6270A maximum pressure of 3000 psi and the 8370A with maximum pressure of 15,000 psi. The nice thing is they share a lot of commonality which makes them easy to switch between and easy to use.Very small...

PPCH 1.01n Embedded Software (.bin)TITLEVERUSE WITHPPCH™1.01n2013.07.22PPCHInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded software.The...

PPCH-G v1.02k Embedded Software (.bin)TITLEVERUSE WITHPPCH-G™1.02k2023.11.08PPCH-GInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded...

PG7000/PG9000 Ver 3.1.5.255 Embedded Software (.bin)TITLEVERUSE WITHPG7000™PG9000™3.1.5.255All PG7000 models with SN 733 or newer. All PG9000 models.TITLEVERUSE WITHPG7000™PG9000™3.1.5.255All PG7000 models with SN 733 or newer. All PG9000 models.Instructions:The PG7000/PG9000 firmware versions 3.00 and newer are intended to work with all PG9000 models and PG7000 models with serial numbers 733 or newer. Do not attempt to upgrade an older PG7000 model with this software. This upgrade does not...

PG7000 Ver 2.01 Embedded Software (.bin)TITLEVERUSE WITHPG7000™2.01PG7102, PG7302 or PG7601Instructions:TITLEVERUSE WITHPG7000™2.01PG7102, PG7302 or PG7601Instructions:-Ver 2.00 UsersYour PG7000™ time and date will not operate with Ver 2.01 until a hardware change is implemented.-Ver 1.0x UsersVer 2.01 is a major revision which should be accompanied by hardware changes. Contact a Fluke Calibration Authorized Service Center for additional information.Download the file. Run Winflash and select...

PG7000 Ver 1.05f Embedded Software (.bin)TITLEVERUSE WITHPG7000™1.05fPG7102, PG7302 or PG7601Instructions:TITLEVERUSE WITHPG7000™1.05fPG7102, PG7302 or PG7601Instructions:Download the file. Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating...

PG7000 Ver 2.07h Embedded Software (.bin)TITLEVERUSE WITHPG7000™2.07hAll PG7000 Series modelsInstructions:-Ver 2.02x and 2.03x Users You can upgrade directly to this version with no special considerations.-Ver 2.01x UsersVer 2.02 is a major revision which should be accompanied by hardware changes.-Ver 1.0x UsersVer 2.01 is a major revision which should be accompanied by hardware changes. Contact a Fluke Calibration Authorized Service Center for additional information.Download the file. Run Winflash and...

PPCK+ v1.00m Embedded Software (.bin)TITLEVERUSE WITHPPCK+™1.00m2005.01.05PPCK+Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded software.The...

PPCH-G v1.02f Embedded Software (.bin)TITLEVERUSE WITHPPCH-G™1.02f2012.04.04PPCH-GInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded...

PPC4E v1.2.6.15 Embedded Software (.bin)TITLEVERUSE WITHPPC4E™1.2.6.15PPC4EInstructions:Download the file by clicking on "PPC4E v1.2.6.15.bin".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it...

PPC4 v1.2.6.14 Embedded Software (.bin)TITLEVERUSE WITHPPC4™1.2.6.14PPC4 (including -AF models)Instructions:Download the file by clicking on "PPC4 v1.2.6.14.bin".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

PPC2-AF v1.01e Embedded Software (.bin)TITLEVERUSE WITHPPC3™1.03d2011.10.21PPC3 (including -AF models)Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should only be performed after...

Fluke DAQ Software (.zip)Discontinued ProductThis product has been discontinued. The download is still available for existing users to download for installation as necessary.DescriptionFluke DAQ 6.0.4 application software for use with Fluke data acquisition and temperature scanning products (2638A, 1586A, 2640A, 2645A, 2680A, 2686A). Version 6.04 is an update to Version 6.03.Evaluation Mode:Without an activation key this program will run for 40-hours of cumulative run-time in Evaluation (DEMO) mode....

MET/TEMP II Software Download (.exe)TITLEVERLinksMET/TEMP II5.2Product PageDescriptionWhen downloaded, this file can be run to install MET/TEMP II. There is no free demo/trial version of 5.2. In order to install MET/TEMP II v5.2, you must purchase the software and obtain a serial number. The installation process prompts you to enter the serial number. Version 5.2 does not accept serial numbers from previous versions of MET/TEMP II. The serial number will be located on a sticker on the CD pouch....

COMPASS for Pressure Basic (.exe)Additional Downloads:COMPASS for Pressure Basic, Demo (.exe)COMPASS for Pressure Basic, Upgrade (.exe)COMPASS for Pressure Enhanced (.exe)COMPASS for Pressure Enhanced, Demo (.exe)COMPASS for Pressure Enhanced, Upgrade (.exe)TITLEVERUSE WITHDOCUMENTSCOMPASS®for Pressure™5.2.102024.05.21FPG8601, PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCH, PPCK, PPCK+, RPM3, RPM4, 7050, 7052, 7250, 7252, 7350, 7615, 7750, 7010, 7215, 2465, 2456, 2271A, 6270A, 8270A, 8370A,Third...

96270A RF Reference Source Firmware Upgrade (.ldr)Serial Number RangeBackward CompatibilityDateFirmware RevisionExplanationsAllAll previous versions 96270AApril 2, 2019V1.13Extend capability of previous 96270A models to accept Rohde & Schwarz NRPxxT power sensors.Full list of all sensors recognised by 96270 with install firmware V1.13 installed:Older NRP-Z51, NRP-Z52, NRP-Z55, NRP-Z56, NRP-Z57and NRP-Z58Now extended to include:New: NRP18T, NRP18TN, NRP33T, NRP33TN, NRP40T, NRP40TN, NRP50T, NRP50TN,...

Crystal Reports 2020 (.exe)For the product key to use with your Crystal Reports Editor installation for MET/TEAM, contact softwaresupport@flukecal.com. Include a screen capture of your MET/TEAM Help>About screen. Instructions are here: https://my.fluke.com/en-us/article/KA-03961.This is the Crystal Reports to be used with MET/TEAM software (not MET/BASE) for editing Reports. Service Pack 2 Patch 5If you are currently using Crystal Reports Editor 2013, you should:Uninstall Crystal Reports 2013Reboot...

Crystal Reports 2013 (.iso)For the product key to use with your Crystal Reports Editor installation for MET/TEAM, contact softwaresupport@flukecal.com. Include the version you are using in your email.This is the Crystal Reports to be used with MET/TEAM software (not MET/BASE).Special instructionsClick on the link to download the software.MDS check sum:395a1705f0c23770ea5514580313bc4

Annual global event highlights why measurement matters in everyday lifeEverett, Wash., May 20, 2013 – On May 20th, scientists and organizations dedicated to metrology celebrate World Metrology Day, which commemorates the signing of the international treaty to coordinate weights and measures activities and support the development of the metric system. Fluke Corporation recognizes World Metrology Day as a time to appreciate the scientists in national laboratories throughout the world who dedicate...

Download COMPASS® for PressureVersion 4 Releases4.2 (2012.07.27)ADDCP-115%4COMPASS for Pressure now supports the calibration functions of CalTool for RPTs. This functionality allows users to fully adjust and report calibration results for supported Fluke products. Sample tests are included with COMPASS that support automated collection of as received data and as left data with an adjustment in between. Review the CalTool for RPTs application note for details. The COMPASS CalTool implementation supports...

molbox RFM™ v1.20d Embedded Software (.bin)TITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMTITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of...

LabView® drivers for Pressure and Flow Calibration Products:6270A Modular Pressure Controller/Calibrator »  LabView® drivers for Pressure and Flow Calibration Products:6270A Modular Pressure Controller/Calibrator » 7250 Series Pressure Controller/Calibrator » 7615 Hydraulic Pressure Controller/Calibrator » 7750i Air Data Test Set » molbox1+ Mass Flow Terminal » PPC4 Pressure Controller/Calibrator » PPCH Hydraulic Pressure Controller/Calibrator » RPM4 Reference Pressure...

LabVIEW driver for PPC3 and PPCH (.exe)Additional Downloads:LabVIEW driver for PPC2+ and PPCK+ (.exe)LabVIEW driver for PPC2 and PPCK (.exe)LabVIEW driver for RPM3 (.exe)LabVIEW driver for RPM4 (.exe)LabVIEW driver for molbox (.exe)LabVIEW driver for molbox RFM (.exe)LabView® drivers for Pressure ProductsUSE WITHVERDOWNLOADPPC3™DescriptionLabView is a registered trademark of National Instruments Corp.Instructions:As noted by the table, some of the LabView Drivers support more than one product....

molbox1 v5.41 Embedded Software (.bin)TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

6270A Embedded Software, Update by USB (.zip)Additional Downloads:6270 PCM v104 USB (.zip)Click here to update by serial RS-232 port.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 6270AUpdating the PCM (Pressure...

6270A Embedded Software, Update by Serial RS-232 Port (.zip)Click here to update by USB.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the RS-232 serial port on the rear panel of the 6270AThe below procedure updates the main firmware. Updating...

96270A/96040 Firmware Update (.exe)Documents:96xxx Firmware Release Notes (.doc)96xxx Firmware Upgrade Instructions (.pdf)96270A/96040A RF Reference Source Firmware UpgradeDownload instructions and a list of firmware revision history, new features and resolved issues for the upgrade versions are documented at the link above. You will be asked to complete a brief product registration form before going to the download page for the first time. You will be asked to complete the form even if you have...

8588A & 8558A Firmware, Update by USB (.zip)TITLEUSE WITH8588A & 8558AAllThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by USBFluke 85xx update v1.32To update a Fluke 8588A/8558AAn empty USB stick (of greater than 10Mbytes) will be required. This should be formatted using...

Fluke DPC/Track2 60-Day Trial (.exe)Whether you schedule 200 or 2,000+ calibrations per year, Fluke's DPCTrack2 calibration management software will save you time and assure data integrity by tapping into your Fluke handheld’s documenting features.Using a labor-intensive, manual pen-and-paper system steals valuable resources and wastes time. And there’s also a high probability for measurement errors.With DPCTrack2, calibration time drops by 50% or more. Work assignments and calibration results...

5320A Firmware Upgrade (.zip)Additional Downloads:5320A Uploader (.zip)5320A Multifunction Electrical Tester Calibrator Firmware UpgradeGeneral description5320A firmware upgrade ver. (3.43-1.34-2.43-1.01---2-9-2015) solves an issue in RCD trip current function and adds information lines to substitute leakage current screen.New features and enhancements1. Firmware“Substitute leakage current” function contains additional information on screen:Added line Rsubst with value of resistance connected...

6105A/6100B Electrical Power Standards Firmware Upgrade (.zip)Documents:6105A/6100B firmware Change History and Installation Instructions (.doc)6105A/6100B Electrical Power Standards Firmware UpgradeThis firmware upgrade is suitable for all 6105A and 6100B units that have 2.xx or 4.xx firmware fitted.Note this firmware upgrade is NOT suitable for the 6105A/610B that currently has 1.xx or 3.xx firmware loaded. This upgrade can only be done at a service center.Note this firmware upgrade is NOT suitable...

6003A Firmware Update (.zip)TITLEUSE WITH6003AAllThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by USBInstallationPut the CD into the computer, wait for autorun and select “Software installation” and “Uploader” or start direct “install\freeware\uploader”.Uninstall...

2271A Embedded Software, Update by USB (zip)TITLEUSE WITH2271A2271AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 2271ABegin by clicking on the Get software button. Then download the zip file by clicking the 2271A v10x USB.zip...

52120A Transconductance Amplifier Firmware Upgrade (.zip)Documents:52120A Firmware Release Notes (.doc)The latest firmware upgrade for the 52120A Transconductance Amplifier is now available. Read the firmware installation instructions before proceeding with upgrade. You will be asked to complete a brief product registration form before going to the download page for the first time. You will be asked to complete the form even if you have previously registered your 52120A.Firmware installer software...

4322 v1.4.3.27 Embedded Software (.bin)TITLEVERUSE WITH4322v1.4.3.272015.12.014322TITLEVERUSE WITH4322v1.4.3.272015.12.014322Instructions:Download the file by clicking on "4322 v1.4.3.27 Embedded Software".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a standard RS232 cable to the COM1 port of the 4322.The updating of embedded software should only be performed after...

2680A-904 Trend Link v10, 14 day Demo Download (.zip)Version 10.0Posted April 6, 2015File size: 61.6 MBDescriptionThis is a full-featured Fluke version of Trend Link (2680A-904) by Canary Labs for use with Fluke DAQ V6.0 (2680A-APSW) for use with data acquisition and temperature scanning products (2638A, 1586A, 2640A, 2645A, 2680A, 2686A).This is a 14 calendar-day demonstration program. The download includes the application, user guide (English) and product training tutorial by Canary Labs under...