190 Series II

The 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001.

Type-K thermocouple for use in liquids and gels, measurement range: -40 to 1090 °C.

Type-K thermocouple with tapered tip for use in air, non-caustic gas and surface applications, measurement range: -40 to 816ºC.

Type-K thermocouple for flat or curved surfaces such as plates and rollers, measurement range: 0 to 260 °C.

The Fluke 80PK-8 Pipe Clamp Temperature Probe uses Type-K thermocouple for fast temperature and superheat measurements of pipe surfaces. Buy Online Now.

Compatible with Fluke DMMs, high accuracy and fast reading for low voltage (below 24 V AC, 60 V DC) applications.

Converts a DMM to a thermometer, for use with type-K thermocouples in low voltage applications (below 24 V AC, 60 V DC).

Safety designed female BNC to shielded banana adapter for use with Fluke ScopeMeter 120 Series and Fluke-43B Power Quality Analyzer

Provides power cord operation and charging for ScopeMeter 190 Series test tool.

Set of break-out adapters for the three most common industrial bus connection systems M12, DB-9 and RJ-45.

Set of four Ni-Cad batteries, designed for use with the Fluke ScopeMeter 120 Series and Fluke-43B Power Quality Analyzer.

Battery pack as replacement battery in the Fluke 120 series ScopeMeters test tools and in the Fluke 43 and 43B Power Quality Analyzers.

Set of NiMH batteries designed for use with Fluke ScopeMeter 190 and 190C Series, as well as in the Fluke 430 Series.

Heavy duty case with accessory storage compartments.

This is a Windows software package for documenting, archiving and analyzing measurements from the Fluke CombiScope.

The Fluke Fiber Optic Meter (FOM) helps you test and maintain fiber optic cable without having to buy a whole new meter.

The Fluke i1000s is a clamp-on AC current probe designed to expand oscilloscope applications in industrial and power environments.

Highly reliable, measures 1 A to 1000 A and provides accurate current reading without breaking the circuit. Buy Online Now.

Extend the current ranges of multimeters with a single range 200 A clamp-on AC Current Clamp with safety shrouded banana plugs. Buy Online Now.

The i2000 is an AC current probe utilizing the Rogowski principle. It can be used to measure currents up to 2000 A when used in conjunction with multimeters, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.

Small sized AC current clamp Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools.

The i30 current clamp is based on Hall Effect technology for use in measurement of both DC and AC current.

The i3000s Flex is an ac current clamp can be used to measure currents up to 3000 A when used in conjunction with oscilloscopes, recorders or data loggers.

The i3000s is a clamp-on AC Current Clamp for use with oscilloscopes and multimeters with banana input using the supplied Dual Banana to BNC Adapter.

Fluke i400 AC current clamps extend the use of digital multimeters. Get a single range 400 A AC clamp in a compact shape.

The Fluke i410 AC/DC Current Clamp expands the functionality of digital multimeters and measures up to 400 amps for both AC and DC current.

Small, rugged light easily attaches to any Fluke test probe, bright white LED illuminates contact area, frees both hands for work.

Attach it to a hard hat, a baseball hat, or even a panel door for all the light you need.

Powerful, lightweight, mini-Xenon worklight shines right where you're working. Comes with Limited Edition Fluke Collector's Cap.

MeterCleaner Wipes are pre-moistened with an industrial strength cleaning formula that removes surface dirt, oil, and grease from your test tools.

Safety-designed interface cable to connect the optically-isolated serial interface port of ScopeMeter or Power Quality Analyzer to a standard USB-interface on your PC.

Provides power cord operation and charging for ScopeMeter 90 and 120 series as well as for the Fluke 43 and 43B Power Quality Analyzer and some accessories.

Dual Banana Plug 4 mm male to female BNC Adapter. The set consists of two adapters.

The set consists of two adapters. One red (signal) and one black (ground) 4-mm banana contact.

Male BNC to dual female BNC T-piece. Set consists of two adapters. BB120 Shielded Banana to BNC Adapter is required to adapt to ScopeMeter 120 Series shielded banana jack inputs.

FlukeView software adds PC power to your Fluke ScopeMeter test tool

Add PC power of archiving, logging, capturing screens or data with FlukeView MultiFunction Counter software for Windows®.

The 80PK-18 Pipe Clamp Temperature Probe kit combines the standard 80PK-8 pipe clamp with the larger sized 80PK-10 pipe clamp, to give you a full range of measurement sizes.

L210 probe light + probe extenders. Includes L200 probe light and TP280 test probe extenders

Special value combo pairs the new L200 Probe Light with one of the most popular test leads by Fluke and a handy carrying case.

Foldable soft pouch with six pockets and hook-and-loop.