Oscilloscope resources and case studies

Oscilloscopes Blog TOC image

Safety videos

All oscilloscope articles

Article

Basic oscilloscope functions

Article

How to display a waveform on an oscilloscope

Learn both the traditional manual method and the new automated method of properly displaying a waveform on an oscilloscope. 4 example waveforms illustrated.

Article

Oscilloscope vs multimeter: choosing the right tool for testing and troubleshooting

The difference between an oscilloscope and a digital multimeter (DMM) is simply stated as pictures vs. numbers. Learn more, including when to use each.

Article

Tools for testing electronic circuits

Since its introduction nearly 40 years ago, the 555 timer IC and its companion 556 dual timer have inspired hobbyists, technicians, inventors, engineers, and many others who love to experiment with electronic circuits. An Internet search on "555 timer" yields millions of hits. Using "555 timer projects" as the search phrase yields more than 800,000 hits.

Article

How to read a waveform on an oscilloscope

Oscilloscopes sample signals as they change over time and then plot those signals on a display. The amplitude of the signal is plotted on the vertical axis and time is displayed on the horizontal.

Article

Case study: Keeping the World Up and Running - Seppo's Story

Driving the future of flight, Fluke tools are in the hands of the everyday heroes of aviation. Seppo Huittinen is an instructor at Savo Vocational College in Kuopio, Finland, teaching future aircraft technicians.

Article

Case study: Life safety technician relies on Fluke test tools to verify installations

Every building, whether it houses commercial, industrial, municipal, healthcare, or educational operations, must include life safety systems.

Article

On the Rivers of Suriname, Electric Eels Reveal Their Secrets

Measure eel electricity with Fluke ScopeMeter® portable oscilloscope in Suriname for National Geographic special, Extreme Survivors, with Patrick Stewart

Article

Foundation™ Fieldbus: System and diagnostic basics

The current trend in factory automation is to replace traditional control schemes in which each device has its own control wiring with bus systems that link a number of devices via the same cable. One benefit of bus networks is that they require far fewer cables and wires to connect devices to controllers. One of the most popular and widely used of these bus systems is Foundation Fieldbus.

Article

Capturing the elusive waveform anomalies with the ScopeMeter® 190C Series

Find out how the pass/fail testing function captures random glitches.

Article

Five problems you will never uncover with a digital multimeter

The importance of investing in the right set of tools to monitor power quality issues, and prevent them in the future, can't be emphasized enough. Fluke offers an extensive range of excellent power meters and other power quality tools for troubleshooting, preventive maintenance, and long-term recording and analysis in industrial applications and utilities.

Article

Why 500 MHz bandwidth matters

It's just common sense that the higher the oscilloscope bandwidth, the higher the resolution of the results. The question is: How important is that in the day-to-day troubleshooting of most electricians and engineers? It all depends on your applications.

Article

What is the relationship between oscilloscope bandwidth and waveform rise time?

The formula can be stated in two ways, depending on what you're looking for. It is usually applied to the leading edge of a pulse in a dynamic system and is related to resistor-capacitor filter time constants and settling times.

Article

Troubleshooting Programmable Automation Controller (PAC) I/O at the physical level

The heat, dust, corrosive chemicals, moisture, and vibration common to many work environments can degrade wiring and connections, however, and a harsh electrical environment can degrade signal quality. As a result, effective troubleshooting may require an examination of wiring, connections, and the electrical characteristics of the signals as they traverse the system

Article

Test and record field bus, motors, and power with one instrument

Test and record field bus, motors, and power with one instrument.

Article

Case study: Fluke Oscilloscope Helps Break World Record

Learn how the Fluke ScopeMeter® 190-202 portable oscilloscope, used by scientist Will Crampton and the crew on location in Suriname to measure the voltage of an electric eel.

Article

Powerful new 2-channel handheld oscilloscopes

Fluke ScopeMeter®190 Series II, 2-channel handheld oscilloscopes combine the power of a 2-channel oscilloscope with a 5000-count digital multimeter and paperless recording mode, creating an advanced test and measurement tool that service and maintenance professionals can rely on for troubleshooting equipment performance problems in the field

Article

Introduction to digital storage oscilloscopes (DSOs)

In this introduction to digital storage oscilloscopes (DSOs) you'll find a comprehensive tour of DSO functions and measurements

Article

ABCs of Portable Oscilloscopes: Part 5, Capturing intermittent and random events with a portable oscilloscope

This final installment of the five-part series about using portable oscilloscopes covers how to "capture" waveforms that do not occur in a repeating and predictable way. You can view Part 4 of this series, Capturing and Analyzing Waveforms with a Portable Oscilloscope. You can also view the complete webinar with audio and animations at the Fluke Training Center.

Article

ABCs of Portable Oscilloscopes: Part 4, Capturing and analyzing waveforms

Part 4 of this five-part series describes capturing and analyzing waveforms with a portable oscilloscope, answering that key question, "How do I know if a waveform is good or bad?". You can view Part 3 of this series, Triggering and Isolation. You can also view the complete webinar with audio and animations at the Fluke Training Center.

Article

ABCs of Portable Oscilloscopes: Part 3, Triggering and isolation

Part 3 of this five-part series describes how to trigger an oscilloscope so it displays a signal the way you want, and how the oscilloscope's inputs are isolated. You can view the preceding installment of this series, Signal Input and Processing. You can also view the complete webinar with audio and animations at the Fluke Training Center.

Article

ABCs of Portable Oscilloscopes: Part 2, Signal input and processing

Part 2: Signal Input and Processing

Article

ABCs of Portable Oscilloscopes: Part 1, Multimeters and oscilloscopes

Oscilloscope and multimeter fundamentals, and where each of these devices excels, are covered in part one of this five-part series adapted from The ABCs of Oscilloscopes webinar.