Everett, Wash. – Three-point "test before touch" (TBT) verification of electrical test tools — verify the test tool is working properly before conducting a test, take the test, verify after the test — is a new, important safety development now required by GS38 and NFPA 70E work practices. The new Fluke® PRV240 Proving Unit provides a safe and convenient method for TBT verification of electrical test tools without placing the electrician or technician in potentially hazardous electrical environments, which would generally involve using known live voltage sources.
In contrast to using a known live source, using the PRV240 does not require personal protective equipment (PPE) for tester verification. Use of the PRV240 reduces the risk of shock and arc flash compared to verification of test instruments on high-energy sources in potentially hazardous electrical environments because the PRV240 provides a known voltage in a controlled, low-current state in accordance with safe work practices.
The pocket-sized PRV240 sources 240 V of both ac and dc steady-state voltage for testing of both high- and low-impedance multimeters, clamp meters, and two-pole testers, eliminating both the need for multiple verification tools and the use of a known high-energy voltage source for test instrument verification. To avoid accidental contact, the voltage is supplied through recessed contacts that are activated only when test probes are inserted into the modules insulated access points. A single LED indicates the sourcing of the voltage to verify the test tool, simplifying test tool verification without the need for PPE.
The proving unit can perform up to 5,000 tests per set of four AA batteries and comes with a TPAK magnetic hanging strap for easy accessibility.
For more information about the Fluke PRV240 Proving Unit, visit: www.fluke.com/prv240.
For information on Fluke tools and applications, or to find the location of your nearest distributor, contact Fluke Corporation, P.O. Box 9090, Everett, WA USA 98206, call (800) 44-FLUKE (800-443-5853), fax (425) 446-5116, e-mail email@example.com or visit the Fluke Web site at /.
Founded in 1948, Fluke Corporation is the world leader in compact, professional electronic test tools. Fluke customers are technicians, engineers, electricians, and metrologists who install, troubleshoot and manage industrial, electrical and electronic equipment and calibration processes.
Fluke is a registered trademark of Fluke Corporation. The names of actual companies and products mentioned herein may be the trademarks of their respective owners. For more information, visit the Fluke website.