Insulation Testers

The 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001.

Type-K thermocouple for use in liquids and gels, measurement range: -40 to 1090 °C.

Type-K thermocouple for use in air and non-caustic gas measurements, bead protected by perforated baffle.

Type-K thermocouple with tapered tip for use in air, non-caustic gas and surface applications, measurement range: -40 to 816ºC.

Type-K thermocouple for flat or curved surfaces such as plates and rollers, measurement range: 0 to 260 °C.

Converts a DMM to a thermometer, for use with type-K thermocouples in low voltage applications (below 24 V AC, 60 V DC).

Set of three safety designed insulated Probe Tip Alligator Clips.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

One pair (red, black) of flat, right angle design for connecting to bus bars.

Single probe pierces 0.25 to 1.5 mm insulated wire.

Probe accessory set for usage with VPS200 and PM8918 series scope probes.

Probe Accessory Set for usage with VPS200 & PM8918 Series Scope Probes.

Safety designed female BNC to shielded banana adapter for use with Fluke ScopeMeter 120 Series and Fluke-43B Power Quality Analyzer

Provides power cord operation and charging for ScopeMeter 190 Series test tool.

Set of four Ni-Cad batteries, designed for use with the Fluke ScopeMeter 120 Series and Fluke-43B Power Quality Analyzer.

Set of NiMH batteries designed for use with Fluke ScopeMeter 190 and 190C Series, as well as in the Fluke 430 Series.

Heavy duty case with accessory storage compartments.

Zippered carrying case.

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof.

The Fluke Fiber Optic Meter (FOM) helps you test and maintain fiber optic cable without having to buy a whole new meter.

Heavy duty construction with mounting holes

Set of four Hook Clips (two red and two gray).

The Fluke i1000s is a clamp-on AC current probe designed to expand oscilloscope applications in industrial and power environments.

Highly reliable, measures 1 A to 1000 A and provides accurate current reading without breaking the circuit. Buy Online Now.

Extend the current ranges of multimeters with a single range 200 A clamp-on AC Current Clamp with safety shrouded banana plugs. Buy Online Now.

The i2000 is an AC current probe utilizing the Rogowski principle. It can be used to measure currents up to 2000 A when used in conjunction with multimeters, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.

Small sized AC current clamp Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools.

The i3000s Flex is an ac current clamp can be used to measure currents up to 3000 A when used in conjunction with oscilloscopes, recorders or data loggers.

The i3000s is a clamp-on AC Current Clamp for use with oscilloscopes and multimeters with banana input using the supplied Dual Banana to BNC Adapter.

Fluke i400 AC current clamps extend the use of digital multimeters. Get a single range 400 A AC clamp in a compact shape.

Designed for use with Fluke ScopeMeter 120-series.

Small, rugged light easily attaches to any Fluke test probe, bright white LED illuminates contact area, frees both hands for work.

MeterCleaner Wipes are pre-moistened with an industrial strength cleaning formula that removes surface dirt, oil, and grease from your test tools.

Safety-designed interface cable to connect the optically-isolated serial interface port of ScopeMeter or Power Quality Analyzer to a standard USB-interface on your PC.

Provides power cord operation and charging for ScopeMeter 90 and 120 series as well as for the Fluke 43 and 43B Power Quality Analyzer and some accessories.

Dual Banana Plug 4 mm male to female BNC Adapter. The set consists of two adapters.

Contains replacement parts for usage with the VPS200 & PM8918 Scope Probes.

FlukeView software adds PC power to your Fluke ScopeMeter test tool

Twist. Test. The Fluke TL175 TwistGuard™ Test Leads with retractable, adjustable length test tips. Test leads as tough as your meter.

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

Includes 3 test lead accessories in an all-in-one set. Ideal starter kit for electrical applications.

These insulated test leads provide the convenience and variety for test lead configurations by attaching clips, hooks and grabbers as needed.

An accessory kit especially designed for working in high energy environments.

DMM test leads (red, black) with safety shrouded, standard diameter banana plugs

One pair (red, black) of test leads with sharp needle point tips adjustable to desired length from 0 to 76 mm

Provides comfort grip probes with silicone insulated, right-angle test leads. Heat and cold resistant.

The TL75 Hard Point™ Test Lead Set offers the convenience of a test lead and probe-in-one unit with a variety of connections

One pair (red, black) silicone test leads with right angle shrouded 4 mm (0.16 in) banana plugs.

Very small 1 mm tips to access hard to reach test points

Includes all the SureGrip™ leads and probes in a handy six-pocket, roll-up pouch, along with TL224 test leads.

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

Recommended for use with TL222 and TL224

Replacement tips for TL910.

Set of push-on adapters for TL71 and TL75 test probes.

TRM50 Coaxial Feed-through BNC male to BNC female Cable Terminator.

Add PC power of archiving, logging, capturing screens or data with FlukeView MultiFunction Counter software for Windows®.

Set of two (one red, one gray) Hook Clips, designed for use with STL 120 Shielded Test Leads, VPS40 and TL75 Test Leads. Accepts wires up to 2.5 mm. The contact material is made of reinforced nickel plated steel

When your job depends on every tool in your toolbox, Fluke test leads keep you working. Plated test lead tips stay sharp and accurate.

5 pair (red, black) of double 4 mm banana plugs

L210 probe light + probe extenders. Includes L200 probe light and TP280 test probe extenders

Ideal for testing electronic equipment and offers versatility with modular test probes, alligator clips, test clips and more.