English

Fluke Networks LinkIQ™ Industrial Ethernet Cable+Network Tester

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 21.68ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;
  • Fluke Networks LinkIQ™ Industrial Ethernet Cable+Network Tester
  • Fluke Networks LinkIQ™ Industrial Ethernet Cable+Network Tester
  • Fluke Networks LinkIQ™ Industrial Ethernet Cable+Network Tester
  • Fluke Networks LinkIQ™ Industrial Ethernet Cable+Network Tester

Key features

Check out the LinkIQ Virtual Demo

  • Validates EtherNet/IP, PROFINET, EtherCAT cable to 10 Gb/s
  • Speeds troubleshooting with IP ping
  • Includes adapters for RJ45, M12X, M12D, and M8D cables
  • Performs cable diagnostics, including length

Product overview: Fluke Networks LinkIQ™ Industrial Ethernet Cable+Network Tester

The LinkIQ Industrial Ethernet Cable+Network Tester measures lengths up to 1000 feet (305 m) and provides the distance to faults such as opens, shorts, and unterminated cable.

The included MS-IE Remote Adapter identifies miswires and split pairs on RJ45, M12X, M12D, and M8D terminated cables.

LinkIQ qualifies cabling performance from 10 Mb/s to 10 Gb/s for EtherNet/IP, PROFINET, EtherCAT, and other Industrial Ethernet protocols. It performs ping tests to verify connectivity, and also provides nearest switch diagnostics, including advertised data rate, switch name and port number, VLAN information, plus PoE and load testing up to Class 8 (90W). Ethernet Alliance PoE Certified for reliable multivendor interoperability.

LinkIQ supports multiple languages, and its keyboard includes extended alpha characters and symbols.

Specifications: Fluke Networks LinkIQ™ Industrial Ethernet Cable+Network Tester

FeatureDescription
Languages supported in UIEnglish, German, French, Japanese, Spanish, Thai, Traditional Chinese, Simplified Chinese, Korean, Russian, Italian, Portuguese
Weight1 lbs 6 oz (624g)
BatteryType: Lithium-ion, 3.6 V, 6400 mAh
Life: 8 hours typical
Charge time: 4.5 hours
Charging temperature range: 0 °C to +40 °C
Power AdapterInput: 100 to 240 VAC ±10%, 50/60Hz
Output: 15 VDC, 2 A maximum
Class II
Host InterfaceUSB type C
Display800 x 480 color capacitive multi-touch
Dimensions8.5 in x 4.5 in
Operating Temperature0°C to 45°C
Storage Temperature-10°C to +60°C
Operating Relative Humidity0 % to 90 %, 0°C to 35°C
0 % to 70 %, 35°C to 45°C
Operating Altitude4,000 m
3,200 m with ac adapter
VibrationRandom, 2 g, 5 Hz-500 Hz
Drop1 m drop, 6 sides
 

Active Network Diagnostics

FeatureDescription
Diagnostic ProtocolsLink Layer Discovery Protocol (LLDP)
Cisco Discovery Protocol (CDP)
Fast Link Pulses (FLP)
Internet Control Messaging Protocol (ICMP),
Dynamic Host Configuration Protocol (DHCP)
IP Address SetupLinkIQ address, DNS Server, Gateway for IPv4 or v6 either manually or via DHCP
IP Ping Test ResultsFour response time results for target, DNS Server(s), Gateway, plus average and number lost
Power Over Ethernet CompatibilityEthernet Alliance Certified to IEEE 802.3af/at/bt,
Hardware negotiation with signature resistance,
Software negotiation with LLDP/CDP
Power Over Ethernet MeasurementsLoaded Voltage (V)
Loaded Power (W)
Port BlinkBlink the light of the connected port
 

Cable Test Specifications

FeatureDescription
Test PortShielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs.
Commissioning Autotests10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire map Only.
Test Speed: 6 seconds for lengths < 70 m
Cable TypesBalanced twisted-pair cabling
Unshielded twisted-pair
Screened twisted-pair
2-pair and/or 4-pair
Wire Map-Only TestsDocument wire map
Length of each pair
Diagnose split pairs
User selectable T568A or T568B
User selectable crossover settings (Straight through, Half-crossover, Full-crossover)
Test speed: 1 second for lengths < 120 m
Length (Maximum)305 m (1000 ft)
Nominal Velocity of Propagation (NVP)User settable
Tone GeneratorGenerates digital tones compatible with Fluke Networks IntelliTone probe.
Generates analogy tones compatible with general analog probes.
Remote ID LocatorsUse remote ID terminations to identify up to 7 unique ports or office outlets

Models: Fluke Networks LinkIQ™ Industrial Ethernet Cable+Network Tester

LIQ-100-IE

LIQ-100-IE Cable+Network Industrial Ethernet Tester

Buy it

Includes:

  • LinkIQ™ Main Unit
  • Remote ID #1
  • RJ45-RJ45 patch cord (M-F)
  • Quick Reference Guide
  • AC charger
  • RJ45/11 universal coupler
  • RJ45/M12X patch cord
  • RJ45/M12D patch cord
  • RJ45/M8D patch cord
  • RJ45/11 Modular Adapter
  • Hanging strap with Remote ID holder
  • Duffle bag carry case
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 73.04ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 22.77ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
Please enable cookies to view product reviews.