English

Fluke 772 Milliamp Process Clamp Loop Meter

Fluke 772 Milliamp Process Clamp Loop Meter is rated 4.2 out of 5 by 5.
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 23.47ms
  • REVIEWS, PRODUCT
  • Fluke 772 Milliamp Clamp Meter
  • Fluke 772 Milliamp Clamp Meter
  • Fluke 772 Milliamp Clamp Meter

Key features

  • Loop meter that measures 4 to 20 mA signals without breaking the loop
  • Features best in class 0.2% accuracy
  • Simultaneously measures the mA signal with the clamp and sources a mA signal
  • Delivers 0.01 mA resolution and sensitivity
  • Measures mA signals for PLC and control system analog I/O

Product overview: Fluke 772 Milliamp Process Clamp Loop Meter

Fluke 772 Milliamp Clamp Loop Meter measures, sources, and simulates 4-20 mA signals for testing control system I/O or IPs

The Fluke 772 loop meter adds to the basic capabilities of the Fluke 771 to save more time and expand its applications. With the 771, you'll also be able to: source and simulate 4-20 mA signals for testing control system I/O; measure 4-20 mA signals with in-circuit measurement; power a transmitter with the 24 V loop power supply; and automatically ramp and step change the 4-20 mA output for remote testing.

You'll be able to test 4–20 mA signals five times faster than with traditional DMMs, and without breaking the loop. That means you can troubleshoot a live device without having to power down, which can save you time, and help you avoid possibly missing something going on in the process.

Other useful features:

  • Simulates 4-20 mA signals for testing control system I/O
  • Sources 4 to 20 mA signals for testing control system I/O or I/Ps
  • Measures 4 to 20 mA signals with in-circuit measurement
  • Includes simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
  • Features a detachable clamp with extension cable for measurements in tight locations
  • Captures and displays changing measurements with Hold function
  • Offers mA output linear ramp or 25% step output
  • Extends battery life with auto-off and backlight timeout
  • Dual backlit display with both mA measurement and percent of 4 to 20 mA span
  • Measurement Spotlight to illuminate hard to see wires in dark enclosures
  • Measures 10 to 50 mA signals in older control systems using the 99.9 mA range
  • Automatically changes the 4 to 20 mA output for remote testing

What's in the box:

  • Fluke 772 Milliamp Clamp Meter
  • (1 pair) TL75 test leads
  • AC72 detachable clip
  • (1 pair) TL 940 mini hook test leads
  • (4) AA alkaline batteries (installed)
  • Soft carrying case
  • Magnetic Hanging Strap
  • Quick Reference Guide
  • 3-year warranty

Specifications: Fluke 772 Milliamp Process Clamp Loop Meter

Specifications
Diameter of measurable conductor0.177” or 4.5 mm max
Operating temperature-10 to 50ºC
Storage temperature-25 to 60ºC
Operating humidity< 90% @ <30ºC, < 75% @ 30 to 55ºC
Operating altitude0 to 2000 m
IP ratingIP 40
Size44 x 70 x 246 mm (2 7/8 x 5 ¾ x 11 5/8 in)
Weight410 g, (14.4 oz)
VibrationRandom 2 g, 5 to 500 Hz
Shock1 meter drop test (except the jaw)
EMI/RFIMeets EN61326-1
For current measurement w/ JAW, add 1mA to specification for EMC field strengths of 1V/m up to 3V/m.
Temperature coefficient0.01% ºC
(< 18ºC or > 28ºC)
Power, battery life(4) AA 1.5 V Alkaline, IEC LR6, 12 hours in mA source into 500 ohms
WarrantyThree years for electronics
One year for cable and clamp assembly
Functional Specifications
mA measurement
(measured by clamp)
Resolution / range0 to 20.99 mA
Accuracy0.2% + 5 counts
Resolution / range21.0mA to 100.0 mA
Accuracy1% + 5 counts
mA measurement (measured in series with test jacks)Resolution / range0 to 24.00 mA
Accuracy0.2% + 2 counts
mA source (maximum mA drive: 24 mA into 1,000 ohms)Resolution / range0 to 24.00 mA
Accuracy0.2% + 2 counts
mA simulate (maximum voltage 50 V dc)Resolution / range0 to 24.00 mA
Accuracy0.2% + 2 counts

Models: Fluke 772 Milliamp Process Clamp Loop Meter

Fluke 772
Fluke 772 Milliamp Clamp Meter
Buy it

Includes:

  • Four AA alkaline batteries (installed)
  • Soft carrying case
  • TL75 test leads
  • AC 72 detachable clip
  • TL 940 mini hook test leads
  • Instruction sheet
  • Hanging tool with hook and loop strap
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 21.71ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
Rated 5 out of 5 by from Major Time Saver I've been using this meter for process control at multiple water plants and it has saved a lot of time in troubleshooting issues from new wiring to suspected bad instruments or faulty analog PLC modules. Not having to take the time to pull a wire and hook a meter in series or even the mental calculations to convert 1-5v with a 250ohm resistor to current is great. We had a problem with the plastic clamp shortly after buying it. The hinge broke but Fluke was quick to provide a replacement instrument. Being able to quickly supply current to a loop has also been invaluable. Productivity is the name of the game and this unit helps us get things up and running faster. It has indeed paid for itself.
Date published: 2016-12-15
Rated 4 out of 5 by from Excellent Controls Meter I purchased this meter to check milliamp outputs for process control systems. This meter works great for a not-contact meter. It is nice to be able to trouble shoot if the signal is making it to my control device without having to break into the circuit. Only thing preventing a five start rating is the price.
Date published: 2016-12-13
Rated 5 out of 5 by from Usefull meter We got this meter for our agriculture equipment that has 4-20mA sensors on it and it works great to trouble shoot and diagnose the machine.
Date published: 2016-12-09
Rated 5 out of 5 by from Great commissioning meter The great feature about this meter is that you can measure a mA signal without breaking the circuit. It is also very useful troubleshooting mA output signals. It's been a great aide and time saver in instrument commissioning. It makes it very easy to simulate analog inputs prior to instrument installation. I would recommend this product to anyone that has several 4 -20 mA instruments to maintain.
Date published: 2016-12-07
Rated 2 out of 5 by from a little overpriced i bought this meter in the $700 range. the only awesome feature is that you can measure a mA signal without breaking the circuit. other than that, i would not recommend this product. what i find particularly disappointing is that you cannot fully troubleshoot a mA circuit with this tool. without being able to read voltage with this tool, you are not able to tell whether you have an open circuit or no power. i am troubled by the fact that you need to buy the top-of-the-line meter to fully troubleshoot a mA circuit.
Date published: 2012-07-07
  • y_2024, m_10, d_7, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_3739311472692, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 22.07ms
  • REVIEWS, PRODUCT
Please enable cookies to view product reviews.