What's in your toolbox? Yuengling Tampa Brewery
|Fluke thermal imager
|Detecting possible problems in motors and mechanical equipment (such as an overheated motor on a spent grain pump).
|Fluke 810 Vibration Tester
|Identigying bearing problems in rotation equipment, such as blower motors and pumps.
Investigating possible problems detected with the thermal imager.
|Fluke 1735 Three-Phase Power Logger
|Comparing current draw against rotational speed and output pressure on positive displacement pumps to help verify bearing problems detected with a Fluke 810 Vibration Tester.
|Fluke 9040 Phase Rotatio Indicator
|Verifying correct connections in three-phase systems.
|Fluke 744 Documenting Process Calibrator
|Verifying the performace of temperature and pressure measurement instruments.
Viewing and changing device parameters in HART-compatible instruments.
|Fluke 707 Loop Calibrator
|Verifying that analog PLC cards are reading signals and working properly.
|Fluke 700PTP-1 Pneumatic Test Pump
|Delivering air at known pressure to calibrate instruments and sensors.
|Fluke 322 Clamp Meter
|Checking current draw and power consumption.
|Fluke 771 Milliamp Process Clamp Meter
|Checking instrument and control signals without breaking the circuit or interrupting the process.
|Fluke i3000s Flex AC Current Clamp
|Measuring currents of up to 1,500 amps through any leg of a substation.
|Fluke Networks test tools
|Testing and repairing the Ethernet network that links 60 programmable logic controllers (PLCs) in the brewery.