Analizadores de calidad eléctrica portátiles (RPM)
Características principales
- 4 voltage channels to measure the three phases plus neutral-to-ground voltage.
- Unique 5 current channels allow you to monitor neutral and ground current in addition to the individual phases.
- The power recorder looks at every cycle for power quality events such as sags, swells, interruptions and transients on all channels simultaneously. You will see everything from sub-cycle transients to
- Don’t know what to look for? Don’t worry, you don’t need to set trigger thresholds. Adaptive thresholds optimize event capture. You won’t be disappointed about missed events or a memory full of noise
- Records true RMS voltage, true RMS current, frequency, harmonics, power consumption parameters (W, kWh, VA, VAR, PF) and imbalance.
- Analyzes voltage characteristics according to the EN50160 standard.
- Transient capture down to 500 ns duration and 6400 Vpk.
- High-speed waveform capture allows you to display transients as fast as 500 ns.
- Stores up to 96,000 events.
- Real-time oscilloscope shows all 9 channels simultaneously.
- Aluminum enclosure is designed to handle a lifetime of use.
- Ethernet interface makes downloads fast and easy and TCP/IP enables communication via Internet.
- Wide selection of models. Whether portable or for fixed installations, just pick the model that fits your application best. Growing needs? You can always expand capabilities by adding options later.
Software completes the system
Capture thousands of events without setting any threshold using the unique Full Disclosure technology
There are two software packages available for the Power Recorder:
- The Power Analysis System software and
- The Scenario software.
- Both packages handle seamless communication with the Power Recorder, graphical display of power-system parameters, and data-management tools.
Power Analysis System software
Plot events on any power tolerance curve. You can create your own or use CBEMA, ITIC and ANSI curves
For the Power Analysis System software there are two optional packages available:
- Report writer software. This software analyzes all the data collected. It sorts events and summary data and merges graphs with Microsoft Word for easy documentation and report creation.
- Polling and alarm software. This automates collection of data from multiple monitors to: alert key personnel to serious events by executing alarm procedures. easily centralize data collection via
The Scenario software
Real-time waveform display shows up to 9 channels (4 voltage, 5 current) including ground and neutral current.
This powerful software package performs predictive analysis, manages data and gives advanced warning to avoid shutdowns.
- Allows plotting of multiple-measurement sessions on one timescale
- Includes facilities for comparing trends from multiple databases
- Calculates a Power Quality Index - a single figure of merit that characterizes the overall performance of a power system. The Power Quality Index allows you to determine system-performance trends over
Descripción general del producto: Analizadores de calidad eléctrica portátiles (RPM)
Simply disclose everything, every event, every parameter, on every cycle, all the time – within seconds
No longer will your power distribution system hold any secrets. The power recorder series is a unique range of instruments that increase your ability to maintain and troubleshoot your plant’s power quality. They monitor every aspect of power without blind spots or gaps, on all conductors in your 3-phase distribution system. 9 channels allow you to exactly monitor what’s happening on the neutral and ground conductors as well. Unlike other power monitors, every parameter on every conductor is measured all the time. And they are easy to use. Within seconds you will have your first measurements. There’s no need to set trigger thresholds or reconfigure the instrument. Just hook it up and start monitoring.
Especificaciones: Analizadores de calidad eléctrica portátiles (RPM)
| Specifications | |||
| Number of channels | Voltage channels | 4 | |
| Current channels | 5 | ||
| Voltage (phase) | Range | 100 mV - 600 VRMS, 1000 V peak | |
| Sampling rate | 6.4 kS/s¹ or 2 MS/s² | ||
| Resolution | 14 bits, 90 mV | ||
| Accuracy | ±(1.5% of reading + 0.5 V) | ||
| Voltage (neutral) | Range | 10 mV - 70 VRMS, 1000 V peak | |
| Sampling rate | 6.4 kS/s¹ or 2 MS/s² | ||
| Resolution | 14 bits, 90 mV | ||
| Accuracy | ±(1.5% of reading + 0.5 V) | ||
| Current | Range | Depends upon CT | |
| Sampling rate | 6.4 kS/s¹ | ||
| Resolution | 14 bits | ||
| Accuracy | ±(0% of reading + 0.1% of probe range + probe uncertainty) | ||
| Transient capture | Range | 200 - 1000 V peak | |
| Sampling rate | 6.4 kS/s¹ | ||
| Resolution | 10 bits, 12 V | ||
| Accuracy | ±(5% of reading + 36 V) | ||
| High speed transient capture | Range | 200 - 6400 V peak | |
| Sampling rate | 6.4 kS/s¹ | ||
| Resolution | 10 bits, 12 V | ||
| Accuracy | ±(5% of reading + 36 V) | ||
| 150 Hz line frequency 2For high speed models Nominal fundamental frequency: 50/60 Hz ±0.1 Hz Voltage and current sampling: 128 samples per cycle | |||
| Environmental specifications | |||
| Operating temperature | 0 - 50 °C | ||
| Humidity (without condensation) | 90% | ||
| Safety specifications | |||
| Safety rating | IEC 61010-1 CAT III 600 V | ||
| Standards | Measurements | IEC 61000-4-30 Class B using cycle based techniques | |
| Power quality | EN 50160 | ||
| Mechanical and general specifications | |||
| Size | 21.25 x 30 x 7.5 cm | ||
| Weight | 6 kg | ||
| Warranty | 1 year | ||
| Case | Rugged, aluminium casing | ||
| Power, battery life | Mains | 85 - 264 VAC, 47 - 440 Hz | |
| DC | 10 - 15 V with 4255 cable | ||
| Backup | NiCd, recharges automatically while power is applied | ||
| Powers the instrument for 5 minutes then controlled shutdown. Monitoring resumes after power is restored. | |||
| Power consumption | 40 W | ||
| Communication | 10Base-T Ethernet, RJ45 connector or via Internet | ||
Modelos: Analizadores de calidad eléctrica portátiles (RPM)
Simply disclose everything, every event, every parameter, on every cycle, all the time – within seconds
No longer will your power distribution system hold any secrets. The power recorder series is a unique range of instruments that increase your ability to maintain and troubleshoot your plant’s power quality. They monitor every aspect of power without blind spots or gaps, on all conductors in your 3-phase distribution system. 9 channels allow you to exactly monitor what’s happening on the neutral and ground conductors as well. Unlike other power monitors, every parameter on every conductor is measured all the time. And they are easy to use. Within seconds you will have your first measurements. There’s no need to set trigger thresholds or reconfigure the instrument. Just hook it up and start monitoring.
| Specifications | |||
| Number of channels | Voltage channels | 4 | |
| Current channels | 5 | ||
| Voltage (phase) | Range | 100 mV - 600 VRMS, 1000 V peak | |
| Sampling rate | 6.4 kS/s¹ or 2 MS/s² | ||
| Resolution | 14 bits, 90 mV | ||
| Accuracy | ±(1.5% of reading + 0.5 V) | ||
| Voltage (neutral) | Range | 10 mV - 70 VRMS, 1000 V peak | |
| Sampling rate | 6.4 kS/s¹ or 2 MS/s² | ||
| Resolution | 14 bits, 90 mV | ||
| Accuracy | ±(1.5% of reading + 0.5 V) | ||
| Current | Range | Depends upon CT | |
| Sampling rate | 6.4 kS/s¹ | ||
| Resolution | 14 bits | ||
| Accuracy | ±(0% of reading + 0.1% of probe range + probe uncertainty) | ||
| Transient capture | Range | 200 - 1000 V peak | |
| Sampling rate | 6.4 kS/s¹ | ||
| Resolution | 10 bits, 12 V | ||
| Accuracy | ±(5% of reading + 36 V) | ||
| High speed transient capture | Range | 200 - 6400 V peak | |
| Sampling rate | 6.4 kS/s¹ | ||
| Resolution | 10 bits, 12 V | ||
| Accuracy | ±(5% of reading + 36 V) | ||
| 150 Hz line frequency 2For high speed models Nominal fundamental frequency: 50/60 Hz ±0.1 Hz Voltage and current sampling: 128 samples per cycle | |||
| Environmental specifications | |||
| Operating temperature | 0 - 50 °C | ||
| Humidity (without condensation) | 90% | ||
| Safety specifications | |||
| Safety rating | IEC 61010-1 CAT III 600 V | ||
| Standards | Measurements | IEC 61000-4-30 Class B using cycle based techniques | |
| Power quality | EN 50160 | ||
| Mechanical and general specifications | |||
| Size | 21.25 x 30 x 7.5 cm | ||
| Weight | 6 kg | ||
| Warranty | 1 year | ||
| Case | Rugged, aluminium casing | ||
| Power, battery life | Mains | 85 - 264 VAC, 47 - 440 Hz | |
| DC | 10 - 15 V with 4255 cable | ||
| Backup | NiCd, recharges automatically while power is applied | ||
| Powers the instrument for 5 minutes then controlled shutdown. Monitoring resumes after power is restored. | |||
| Power consumption | 40 W | ||
| Communication | 10Base-T Ethernet, RJ45 connector or via Internet | ||