English

Fluke Networks CableIQ™ Qualification Tester Kit

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 24.17ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;
  • Fluke Networks CableIQ™ Qualification Tester Kit
  • Fluke Networks CableIQ™ Qualification Tester Kit
  • Fluke Networks CableIQ™ Qualification Tester Kit
  • Fluke Networks CableIQ™ Qualification Tester
  • Fluke Networks CableIQ™ Qualification Tester Kit
Discontinued

Key features

  • Tests and qualifies any copper Ethernet cabling
  • Measures network capacity (10/100/1000) for VoIP, data, video
  • Troubleshoots length, distance to fault, wire map, opens, shorts, PoE
  • Advanced diagnostics: insertion loss, cross talk, noise issues
This product is discontinued or reclassified

Product overview: Fluke Networks CableIQ™ Qualification Tester Kit

CableIQ works on live copper networks to provide Ethernet switch detection and device configuration. Especially useful in harsh industrial environments, CableIQ tests data rates and quickly finds common cable faults caused by vibration, extreme flexing, moisture, and expansion and contraction from temperature change. It checks continuity on all wires and displays results graphically, so you can see opens, shorts, and crossed wires. CableIQ also reports the distance to an open connection within the cable.
 

What's in the box:

  • CableIQ unit
  • Reporter software
  • Commonly used accessories
  • Duffel bag

Specifications: Fluke Networks CableIQ™ Qualification Tester Kit

Specifications
Cable types supportedUTP, STP, FTP, SSTP, RG6, RG59, audio and security
Qualification autotests1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax
Supported testsWiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection.
WiremapCan detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs.
Find faultMeasures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application
Results storageUp to 250 qualification test results
PowerBattery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries
Battery life20 hours of typical use, without backlight
Other battery types supported4AA photo lithium, NIHM, NICAD
Dimensions and weight7in x 3.5in x 1.75in (17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg)
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 145.43ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 22.61ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
Please enable cookies to view product reviews.