Fluke slotted insulated screwdrivers

Fluke slotted insulated screwdriver is rated 3.0 out of 5 by 2.
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 23.23ms
  • Fluke insulated slot-tip screwdriver
  • Fluke insulated slotted screwdrivers have a lifetime warranty

Key features

  • (1) Slotted Screwdriver: three sizes available, sold individually
  • Certified to 1000 V AC, 1500 V DC
  • Ergonomic handle causes less strain, provides maximum torque

Product overview: Fluke slotted insulated screwdrivers

Slotted screwdriver

Full-length, impact proof handle core is coated with soft-grip outer material, hanging hole for extra security and anti-roll handle design. With insulation from the tip of the screwdriver all the way to the end of the handle, it’s designed to keep your hand safe from electric shock; certified up to 1000 V AC and 1500 V.

Ergonomic Grip Handle

The ergonomic handle adapts to the user’s hand so that it causes less strain and work fatigue while still providing maximum torque during a long day. And the slim, insulated shaft allows access in hard to reach areas.

Three sizes of slotted screwdrivers are available; sold individually or in kits.

  • 3/32 blade, 3" shaft (2.5 mm blade, 75 mm shaft)
  • 5/32 blade, 4" shaft (4 mm blade, 100 mm shaft)
  • 1/4 blade, 5" shaft (6 mm blade, 125 mm shaft)

No matter what you’re working on, be safe and grab for an insulated screwdriver. Every screwdriver is individually tested to 10,000 volts and backed by a limited lifetime warranty.

Specifications: Fluke slotted insulated screwdrivers

Screwdriver TypeBlade length
Handle length
Handle width
Bladeform diameter
Head SlotSlot3
Head SlotSlot4
Head SlotSlot5


Fluke Insulated Hand Tool Lifetime Limited Warranty

Each Fluke Insulated Hand Tool will be free from defects in material and workmanship for its lifetime. As used herein, “lifetime” is defined as seven years after Fluke discontinues manufacturing the product, but the warranty period shall be at least fifteen years from the date of purchase. This warranty does not cover damage from neglect, misuse, contamination, alteration, accident or abnormal conditions of operation or handling, damage or normal wear and tear of mechanical components. This warranty covers the original purchaser only and is not transferable.

Recommendations for use and in-service care of Fluke Insulated Hand Tools

The following is guidance concerning the maintenance, inspection, retest and use of Fluke Insulated Hand Tools.

Warning – to avoid electrical shock or personal injury:

  • Keep fingers behind the finger guards of the tool. Never touch conductive parts.
  • Always wear approved eye protection.
  • Do not use in wet or damp locations. Do not use unless the tool is clean and dry.
  • Do not apply excessive force or stress to the tool insulation that may cause damage. Examples include using the insulated surfaces as a fulcrum to pry or wedge or gripping insulated tool handles with other tools such as pliers or wrenches to increase torque or leverage.

If the tool is used in a manner not specified, the protection may be impaired.


Insulated hand tools should be properly stored to minimize the risk of damage to the insulation due to storage or transportation. These insulated hand tools should be stored separated from other tools to avoid mechanical damage or confusion with uninsulated tools. Furthermore, these insulated hand tools should be prevented from contact with excessively hot surfaces (for example steam pipes) or exposure to excessive UV- radiation.

Inspection before use

Before use, each Insulated Hand Tool should be visually inspected by the user. If there is any doubt concerning the safety of the insulated hand tool, it should be subjected to examination by a competent person and if necessary retested to determine suitability or disposed of to prevent further use.


Insulated Hand Tools should be used only in environments having temperatures between –20 °C and +70 °C and, for tools marked “C”, between –40 °C and +70 °C.

Periodic examination and electrical retesting

An annual visual examination by a suitably trained person is recommended to determine the suitability of the Insulated Hand Tool for further service. If an electrical retest is required by national regulation or in the case of doubt after visual examination, the applicable dielectric test of IEC 60900 for insulated hand tools should be performed.

For details contact a Fluke Service Center.

Models: Fluke slotted insulated screwdrivers


Insulated Slotted Screwdriver 3/32, 3"; 2.5 mm, 25 mm

Buy it

Insulated Slotted Screwdriver 5/32, 4"; 4 mm, 100 mm

Buy it

Insulated Slotted Screwdriver 1/4, 5"; 6 mm, 125 mm

Buy it
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 23.62ms
  • bvseo-msg: HTTP status code of 404 was returned;
Rated 5 out of 5 by from I like to buy the best I think it's worth spending money on quality tools.
Date published: 2022-05-13
  • y_2024, m_5, d_29, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_1
  • loc_en_US, sid_3830673080372, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 25.18ms
Please enable cookies to view product reviews.