United States [Change Country]  |  Fluke [Change Company]
 fluke
Home  |  Support  |  Software Downloads  |  Power Quality Software Downloads
Contact usRefer this page

Power Quality Software Downloads

To get these new features you will need to register your product and then you will be provided with update instructions. If you have already registered your product simply register it again.

Fluke 345 Power Quality Clampmeter »

Power Log 2.9.2 PC application software »
Now cross-compatible with the Fluke 435, VR1710 and 1735.
Firmware Updater Software (.exe) »
Firmware Upgrade Instructions (.doc) »

Latest Firmware versions:

The firmware on the instrument can be checked using these steps: Press Menu key, select Instrument Setup using the cursor keys, press Enter, select Version & Calibration using the cursor key, press Enter. The screen displays the firmware version.

Firmware v1.02 »
Use this firmware if the existing firmware version on the instrument is less than 2.0

Firmware v2.35 »
Use this firmware if the existing firmware version on the instrument is greater than 2.0

  • Right click and select 'Save Target As' to save file prior to using upgrade tool.
  • Requires installation of updater software.

Fluke 345 USB Drivers (.zip) »


Fluke 430 Series Three-Phase Power Quality Analyzers »

Firmware update v2.10 »
Power Log 2.9.2 PC application software »
For the Fluke 435 (now cross-compatible with the Fluke VR1710, Fluke 1735 and the Fluke 345).
FlukeView v3.34 (.zip) »
Software upgrade download for the Fluke 435, 434 or upgraded 433.
Updated driver for OC4USB Rev II USB connector (.exe) »

Fluke 43B Single-Phase Power Quality Analyzer »

FlukeView Version 3.34 (.zip) »
Software upgrade download.

Fluke 1735 Three-Phase Power Logger »

Fluke 1735 Software CD »
To download the entire CD contents follow the above link. Once downloaded the file should be unzipped and either written to a CD or to a known directory.  To access the CD contents run the application Launch.exe.
Power Log 2.9.2 PC application software »
Now cross-compatible with the Fluke 435, VR1710 and 345.
1735 Firmware Upgrade Tools v3.1 »
Vista Compatible.
1735 Firmware v1.09 »
1735 USB Drivers Page »

Fluke 1740 Series Three-Phase Power Quality Loggers »

PQ Log v2.2.0 »
Update that enables analysis to the most recent 2010 EN50160 standard.

Fluke 1750 Three-Phase Power Recorder »

Fluke 1750 Firmware Update v22.03 »
V22.03 Release notes »
Readme file for V22.03 »
Fluke Power Analyze Software v2.1 »
Fluke Power Analyze Software v2.1 Release Notes »
Power View PDA software v1.46 »
Power View PDA software v1.46 Release Notes »
Calibration Wizard Downloads »

Fluke 1760 Three-Phase Power Quality Recorder »

PQ analyze v1.8.8 »
Includes latest product firmware – note file is >26MB.
v1.8.8 release notes (.pdf) »
Firmware Installation Instructions on Devices with Firmware prior to v1.3.17 (.pdf) »

Fluke VR1710 Voltage Quality Recorder »

VR-1710 Firmware Upgrade Tool »
Now supports transient trigger sensitivity.
Power Log 2.9.2 PC application software »
For the Fluke VR1710 (now cross-compatible with the Fluke 430 Series, Fluke 1735 and the Fluke 345).
Fluke-VR-1710 USB Drivers (.zip) »
These drivers are normally included on the software CD included with the VR-1710. Unzip the drivers to a suitable location and follow the instructions detailed in the user manual (the user manual is available for download in the product pages).

Fluke VR101S Event Recorder System »

EventView v2.16 (.exe) »

Fluke 41B Single-Phase Power Quality Analyzer »

FlukeView v3.2 (.zip) »

Fluke Norma High Precision Power Analyzers »

NormaView software download »
This file is compressed, expand the contents of this file to a known location, then run the file launch to install the software.
Before carrying out the Norma Firmware upgrade process check the version of firmware in your analyzer in the General Setup screen under Info (consult the operators manual for details).
Firmware update utility (.exe) »
Read instructions on firmware downloader (.txt) »
Download firmware upgrade file v1.4 »
Right click and select 'Save Target As' to save file prior to using upgrade tool.
Release Notes for FW1.4 (.pdf) »
Remote Control Commands for FW1.4 firmware (.pdf) »
LabView drivers for Norma 4000 and Norma 5000:
LabView 7 drivers (.zip) »
LabView 8 drivers (.zip) »
LabView 9 drivers (.zip) »
Search Fluke
ResourcesProducts
Find Resources

Other Power Quality Software

Reliable power meters »
Other instruments »
Follow us        Home  |  Site Map  |  Fluke Corporation  |  Safety Notices  |  Terms and Conditions  |  Privacy Statement  |  Disclaimer© 1995 - 2012 Fluke Corporation