Fluke VT04 visual IR thermometer maintenance combo kit

  • Fluke VT04 Visual IR Thermometer Maintenance Combo Kit | Fluke
  • Fluke VT04 Visual IR Thermometer Maintenance Combo Kit | Fluke
  • Fluke VT04 Visual IR Thermometer Maintenance Combo Kit | Fluke
  • Fluke VT04 Visual IR Thermometer Maintenance Combo Kit | Fluke

Nyckelfunktioner

  • Unlimited applications – See data sheet for powerful applications and details
  • Built-in digital camera – Every Fluke Visual IR Thermometer has a built-in digital camera
  • Exclusive thermal heat map blending overlay – With one button, blend digital images and thermal heat maps to instantly show the exact location of the issue
  • No training required - Fully automatic with built-in intelligence
  • True pocket size design – Less than half the size of an average infrared camera
  • SmartView® reporting software – Store up to 10,000 images per Gb on included SD card and make professional reports on included professional software
  • Automatic hot and cold spot trackers
  • Breakthrough affordability – Fraction of the cost of infrared cameras that require costly training and software
  • Powerful resolution with PyroBlend® Plus optics:
    • Best-in-class field of view: 28 ° x 28 ° (40% wider for tight spaces)
    • 4 times sharper images
  • Alarm and time lapse features:
    • Hi/Lo temperature alarm – Find hot spots in seconds with the alarm feature
    • Time lapse image capture – Automatically monitor equipment over time
    • Automated monitoring alarm – Automatically capture images after an alarm has been triggered
Köp nu

Produktöversikt

Mätarna VT04 och Fluke 1507 för isolationsresistans är idealiska att använda vid felsökning och förebyggande underhåll.

Modeller

Fluke VT04-Maint-Kit
Fluke VT04 Visual IR Thermometer Maintenance Combo Kit
Köp den

Innehåller:

  • VT04 Visuell IR-termometer
  • 1507 isolationsresistansmätare

Specifikationer

Fluke VT04 Visual IR Thermometer

Key Features
Built-in digital camera Yes
Thermal heat map overlay Yes, five blending modes
Image optics system PyroBlend® Plus optic *4x sharper image than VT02
Field of view 28° x 28°
Hi-Lo temperature alarms Yes
Time lapse image capture Yes
Auto-monitor alarm Yes
Battery type Li-Ion rechargeable
Training No training required
Ergonomics Slim pocket-sized design
Hot and cold markers Yes
General Features
Battery life Eight (8) hours
Temperature measurement range -10°C to +250°C (14°F to 482°F)
Temperature measurement accuracy ±2°C or ±2%
Temperature measurement Yes, centerpoint
Storage medium (micro SD card) Stores up to 10,000 images per Gb (4 Gb card included)
Infrared spectral band 6.5 μm to 14 μm
Level and span Auto
Focus mechanism Focus free, no training required with built-in intelligence
Focus options-exclusive user selectable NEAR/FAR options NEAR < 23 cm (9 in); FAR > 23 cm (9 in)
Dimensions 21 x 7.5 x 5.5 cm (8.3 x 3 x 2.2 in); < 300 g (10.5 oz)
File format .is2 format saved to SD card. User can create professional reports or export images in SmartView (BMP, DIB, GIF, SPE, FIF, SPEG, JPG, PNG, TIF and TIFF)
Safety and compliance CFR47: 2009 Class A. Part 15 subpart B; CE: EN 61326:2006; IEC/EN 61010-1:2010
Warranty Two (2) years
 

Fluke 1507 Insulation Resistance Testers

AC/DC Voltage Measurement
Accuracy Range 600.0 V
Resolution 0.1 V
50 Hz to 400 Hz
±(% of Rdg + Digits)
±(2% + 3)
Input impedance 3 MΩ (nominal), < 100 pF
Common mode rejection ratio (1 kΩ unbalanced) > 60 dB at DC, 50 or 60 Hz
Overload protection 600 V rms or DC
Earth Bond Resistance Measurement
Range/Resolution 20.00 Ω 0.01 Ω
200.0 Ω 0.1 Ω
2000 Ω 1.0 Ω
20.00 kΩ 0.01 kΩ
Accuracy ±(1.5% + 3)
Overload protection 2 V rms or DC
Open circuit test voltage > 4.0 V, < 8 V
Short circuit current > 200.0 mA
Insulation Specifications
Measurement range 0.01 MΩ to 10 GΩ
Test voltage 50 V, 100 V, 250 V, 500 V, 1000 V
Test voltage accuracy +20%, - 0%
Short circuit current 1 mA nominal
Auto discharge Discharge time < 0.5 second for C = 1 µF or less
Live circuit indicator Inhibit test if terminal voltage > 30 V prior to initialization of test
Maximum capacitive load Operable with up to 1 µF load
Measure accuracy 50 V ±(3% + 5)
100 V ±(3% + 5)
250 V ±(1.5% + 5)
500 V ±(1.5% + 5)
1000 V ±(1.5% + 5) to 2000 MΩ, ±(10% + 3) above 2000 MΩ
General Specifications
Maximum voltage applied to any terminal 600 V AC rms or DC
Storage temperature -40°C to 60°C (-40°F to 140°F)
Operating temperature -20°C to 55°C (-4°F to 131°F)
Temperature coefficient 0.05 x (specified accuracy) per°C for temperatures < 18°C or > 28°C (< 64°F or > 82°F)
Relative humidity 0% to 95% @ 10°C to 30°C (50°F to 86°F)
0% to 75% @ 30°C to 40°C (86°F to 104°F)
0% to 40% @ 40°C to 55°C (104°F to 131°F)
Vibration Random, 2 g, 5-500 Hz per MIL-PRF-28800F, Class 2 instrument
Shock 1 meter drop per IEC 61010-1 2nd Edition (1 meter drop test, six sides, oak floor)
Electromagnetic compatibility In an RF field of 3 V/M, accuracy = specified accuracy (EN 61326-1:1997)
Safety Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement category IV 600 V (CAT IV)
Certifications CSA per standard CSA/CAN C22.2 No. 61010.1-04; TUV per standard IEC/EN 61010-1 2nd Edition
Batteries Four AA batteries (NEDA 15A or IEC LR6)
Battery life Insulation test use Tester can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
Resistance measurements Tester can perform at least 2500 earth bond resistance measurements with fresh alkaline batteries at room temperature. These are standard tests of 1 Ω with a duty cycle of 5 seconds on and 25 seconds off.
Size (H x W x L) 5.0 x 10.0 x 20.3 cm (1.97 x 3.94 x 8.00 in)
Weight 550 g (1.2 lb)
IP rating IP40
Altitude Operating 2000 m CAT IV 600 V, 3000 m CAT III 600 V
Non-operating (storage) 12,000 m
Over-range capability 110% of range
Included accessories TL224 Test Leads, TP74 Test Probes, clips PN 1958654 (red) and PN 1958646 (black), holster and remote probe

Resurser