Procurar Resultados

Fluke Park U.S. Headquarters6920 Seaway Boulevard, Everett, WA USA 98203From I-5 (North or South), take EXIT 189 (Hwy 526 West, Mukilteo Ferry). Continue onto Hwy 526, heading west towards the Mukilteo ferry. From Hwy 526, take the SEAWAY BLVD EXIT. Continue north on Seaway Blvd. At the third traffic signal, turn left into Fluke Park entrance, then right to the Visitor's Parking area.Nearby accommodationsDelta Hotels Seattle Everett3105 Pine StreetEverett, Washington(425) 339-2000 Hotel Indigo -...

5560A/5550A/5540A Firmware (update)What’s NewThe latest firmware updates for the Fluke 5560A/5550A/5540A bring some sought-after features that customers have requesting. The full list of key changes can be found below, but here are a few new additions to highlight:Control up to three 52120A Transconductance Amplifiers via rear panel connectorUsing the rear panel connector on your Fluke 5560A/5550A/5540A, you can now remotely control up to three 52120A Transconductance Amplifiers through your 5560A/5550A/5540A...

See 10 steps of how to check the accuracy of an infrared thermometer designed for measuring human body temperature. Learn best practices & how things work.

See the benefits of upgrading from the Druck DPI 515 to the Fluke 6270A & learn steps for configuring & installing the 6270A. Get the details here.

In this article, electrical calibration expert Marty Kidd explains why someone needs this type of product. He also explains why owners of an old Fluke 5790A should consider moving up to a new 5790B.

The Fluke Calibration 1586A and Fluke 2638A are two new data acquisition systems that offer great value and performance. This selection guide will help you understand the differences between the two, the strengths of each, and which one will best meet your current and future needs.

Get answers to common questions about the safety of a high-pressure supply & the capabilities of the Fluke 8270A/8370A High-Pressure Controller/Calibrator.

Whether you’re speaking to a small group of colleagues at your company or a group of professionals at MSC or NCSLI, here are some tips to help you succeed – and perhaps even enjoy your experience as a public speaker.

This article provides essential tips and best practices for running successful mobile calibration services. Whether you're a mobile calibration technician or looking to add mobile calibration services to your business, this guide will help you stay organized and prepared for any situation.

Learn how to effectively calibrate your oscilloscope's trigger operation with our detailed guide. Enhance measurement accuracy and reliability for better outcomes.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

Save time and money by using a 1586A Super-DAQ and a Fluke Calibration dry-well, fluid bath, or furnace to automate the calibration of up to 40 temperature sensors—simultaneously, without requiring a PC or software.

Learn 3 ways to calibrate a PT100 and a basic, 5-step procedure. Also discover how to bring calibration in house along with the benefits and challenges.

Fluke Calibration ceased production and sale of the 6003A Three Phase Electrical Power Calibrator and its specific accessories and options. Fluke introduced this model in 2014 as a competitive power calibrator capable of supplying accurate 3 phases of current and voltage.

A key advantage of deadweight testers is that all of the hardware required to generate pressure and precisely control and measure it can be contained within the instrument. On-board hand pumps are offered on Fluke Calibration Pressurements deadweight testers to generate vacuum or air pressure, or to prime higher pressure hydraulic systems

Learn about Robert Haines, Technology Development Manager at Fluke Calibration, voyage of discovery throughout his calibration career.

The only way to fully answer that question is to dig deeper into the details of your specific workload. There are a lot of variables that effect the pressure calibration standard you choose. The following is a list of key questions that can guide you to choosing the best pressure calibration standard for your application.

Writer’s block isn’t limited to metrologists, of course – it’s a universal problem that people in many professions face (even writers). Here are a few simple tips that can help you on your way to greater visibility and respect in your career.

Learn the most common reasons why someone might upgrade to a modular pressure control system for their existing calibration standards.

MFC-CB™ from Fluke Calibration is a compact, versatile, standalone unit for setting and reading analog mass flow controllers and mass flow meter instruments.

Plugs into USB device host port on the 8846A front panel

Fluke Calibration's MFC Switchbox supplies power and switches between up to five MFC or MFMs on one molbox1+ or MFC-CB channel

Fluke Calibration's 9600FLT 1 GHz offset phase noise filter is used for spectrum analyzer wide-offset phase noise tests, capable of rejecting phase noise at offsets over 1 MHz.

When calibrating a dial gauge, it can be challenging to interpret readings when the pointer is between marks. Learn how to overcome the challenge here.

See the benefits of upgrading the GE Druck PACE 6000 to the Fluke 6270A & learn steps for configuring and installing the 6270A. Get the details here.

This application note summarizes some of the benefits of upgrading to the 6270A, as well as detailing the steps for configuring and installing the 6270A as a replacement to the PACE 5000.

See the steps for how to calibrate a digital multimeter, plus links to 5 free related learning resources including videos, webinars, and articles.

Read this free app note to learn the benefits of modular pressure calibration systems over monolithic & learn how to assess what modular system fits you best.

4-terminal shorting bar

This optional kit makes the 5560A, 5550A or 5540A Muti-Product Calibrator an excellent fit for on-site or mobile calibration

Try this meter calibration option to calibrate megohm meters like the Fluke Calibration 5080A and other portable and bench insulation testers.

MFC-CB is a compact and versatile, stand alone unit for setting and reading analog mass flow controllers (MFC) and mass flow meters (MFM).

The Fluke Calibration ADCS-601 is a fully automated reference level Air Data Calibration Standard for the verification and calibration of air data range instruments, in particular Air Data Test Sets (ADTS).

The Fluke 2620T/2635T Recording Thermometer is a precision multi channel temperature recording and logging instrument that delivers up to 0.1 degree accuracy (3 sigma, one year accuracy specification) for temperature monitoring and calibration applications

Thermocouple calibrator from Fluke Calibration is very stable, CE compliant & can operate in wide temperature range. Request a quote today.

5700A/EP from Fluke Calibration is an upgrade service that extends both the performance & service life of your existing 5700A Multifunction Calibrator.

5522A is a resistance calibrator that calibrates a wide variety of electrical test equipment, provides reverse power protection and is remarkably affordable.

525B temperature/pressure calibrator is the most accurate Fluke Calibration temperature calibrator & also provides high accuracy for pressure calibration.

The Fluke 525A temperature / pressure calibrator has been replaced by the 525B. By clicking, you’ll go to the old 525A page that has a link to the new 525B.

9100 from Fluke Calibration is the world’s best value multiproduct calibrator can calibrate over 15 different equipments including power meter, insulation tester and oscilloscopes.

752A reference divider compensates for long-term changes in value of the divider resistors by switching positions in various Wheatstone bridge configuration

Designed for calibration laboratories, the 8588A Reference Multimeter is the world’s most stable high-precision multimeter. Get the specs & more details here.

molbox1+ from Fluke Calibration is the ideal solution for calibrating gas flow meter, mass flow controllers, rotameters, bubble meters & other flow measurement devices.

Fluke Calibration's OPG1-30000 provides an alternative for generating and adjusting high liquid pressures in calibration and test systems.

The 8558A 8.5-digit multimeter offers 5 mega-samples-per-second high resolution digitizing for system automation in labs and manufacturing test environments.

The 4322 Automated Pressure Calibration System calibrates almost any pressure gauge, transducer, transmitter or switch—including vacuum, compound, absolute & high-pressure devices.

280 series waveform generators from Fluke Calibration are highly sophisticated 12-bit arbitrary generators capable of recreating virtually any waveform.

Release: MET/TEAM version 3.0.0 (with MET/CAL version 10.2.0) (.iso)Documents:MET/TEAM version 3.0.0 (with MET/CAL version 10.2.0) (.pdf)MET/TEAM 3.0.0 ReadMe (.pdf)MET/CAL 10.2.0 ReadMe (.pdf)MET/TEAM Installation Guide (Updated for version 3.0) (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.0.0 and MET/CAL version 10.2.0 release is a a major update to MET/TEAM and MET/CAL software. This update includes new features, improvements, bug fixes, and minor...

Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)Documents:MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)MET/TEAM 3.1.1 Readme (.pdf)Update Instructions for MET/TEAM 3.1.1 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You...

Fluke Calibration offers pressure transducer calibration, and portable pressure calibrators that are rugged, reliable, versatile, and include flash memory for software updates.

COMPASS for Pressure Basic (.exe)Additional Downloads:COMPASS for Pressure Basic, Demo (.exe)COMPASS for Pressure Basic, Upgrade (.exe)COMPASS for Pressure Enhanced (.exe)COMPASS for Pressure Enhanced, Demo (.exe)COMPASS for Pressure Enhanced, Upgrade (.exe)TITLEVERUSE WITHDOCUMENTSCOMPASS®for Pressure™5.2.102024.05.21FPG8601, PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCH, PPCK, PPCK+, RPM3, RPM4, 7050, 7052, 7250, 7252, 7350, 7615, 7750, 7010, 7215, 2465, 2456, 2271A, 6270A, 8270A, 8370A,Third...

Update: MET/CONNECT version 1.3.0 (with MET/CAL version 10.2.3) (.zip)Documents:MET/CONNECT 1.3.0 Installation Guide (.pdf)MET/CONNECT 1.3.0 Readme (.pdf)MET/CAL 10.2.3 Readme (.pdf)Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 1.3.0 and MET/CAL version 10.2.3 release is an update to previous MET/CONNECT and MET/CAL software. This update includes bug fixes and minor updates.You must be running MET/CONNECT version 1.2.0 before upgrading to version 1.3.0.This...

Update: MET/CONNECT version 1.2.0 (with MET/CAL version 10.2.2) (.zip)Documents:MET/CAL 10.2.2 readme (.pdf)MET/CONNECT 1.2.0 readme (.pdf)MET/CONNECT 1.2.0 Installation Guide (.pdf)Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 1.2.0 and MET/CAL version 10.2.2 release is an update to previous MET/CONNECT and MET/CAL software. This update includes bug fixes and minor updates.You must be running MET/CONNECT version 1.1.0 before upgrading to version 1.2.0.This...

6105A and 6100B electrical power calibrator from Fluke Calibration has high accuracy for calibrating secondary standard energy meters & type test applications.

Fluke Calibration's PG7000-AMH is an add-on accessory that automates mass handling over the complete piston gauge pressure range.

Update: MET/CAL version 10.2.2 for MET/TEAM version 3.0.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available with the MET/CONNECT 1.2.0 installer.Current MET/TEAM Customers:MET/CAL version 10.2.2 release is an update to previous MET/CAL software. This update includes bug fixes and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you...

RPM4-E-DWT v1.00c Embedded Software (.bin)TITLEVERUSE WITHE-DWT1.00c2014.08.06RPM4-E-DWTInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded...

RPM4-E-DWT A70M/A7M-AF Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4-E-DWT A70M/A7M-AF™1.00c2012.05.01RPM4-E-DWT-AFDo NOT use with NON "-Af"RPM4-E-DWT Models!Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If...

RPM4-AF v1.00b Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4-AF™1.00b2010.09.22RPM4-AFDo Not use with RPM4, RPM4-AD or RPM4-EDWT or RPM4 in ADCS!Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product...

RPM4-AD v1.00f Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4-AD™1.00f2010.12.28RPM4-ADDo NOT use with NON "-AD" (Air Data)RPM4 ModelsInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an...

RPM4 v1.01I Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4™1.01I2019.04.28RPM4Note: If you have a special RPM4model use these links:RPM4-AD™RPM4-AF™RPM4-E-DWT A70M/A7M-AF™RPM4-E-DWT™Please contact our Calibration and Repair department at 602.773.4782 if you recently upgraded to version 1.01f or plan to upgrade from 1.01f to another version. The upgrade path from 1.01f may cause a potentially significant metrological error.Instructions:Download the file.Run Winflash and select...

Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from either version 3.0.0 or 3.1.0 directly to version 3.1.1.Upgrading from version 3.0.0 or 3.1.0 of MET/TEAM will not require you to re-request your...

Release: MET/TEAM version 3.1.0 (with MET/CAL version 10.5.0) (.iso)Documents:MET/TEAM 3.1.0 Readme (.pdf)MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)Update Instructions for MET/TEAM 3.1.0 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.0 and MET/CAL version 10.5.0 release is a a major update to MET/TEAM and...

PPCH-G v1.02k Embedded Software (.bin)TITLEVERUSE WITHPPCH-G™1.02k2023.11.08PPCH-GInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded...

PPCH 1.01n Embedded Software (.bin)TITLEVERUSE WITHPPCH™1.01n2013.07.22PPCHInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded software.The...

PPC4E v1.2.6.15 Embedded Software (.bin)TITLEVERUSE WITHPPC4E™1.2.6.15PPC4EInstructions:Download the file by clicking on "PPC4E v1.2.6.15.bin".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it...

The Fluke Calibration 96040A RF Reference Source enables you to simplify your RF calibration system by replacing many of the instruments and accessories that make up your current system.

The Fluke Calibration 9118A Thermocouple Calibration Furnace is a horizontal, open-ended tube furnace with a temperature range of 300 °C to 1200 °C.

9114, 9115A, 9116A Freeze-point furnaces from Fluke Calibration are very stable & can be used to maintain metal fixed-points for hours to calibrate your SPRT.

These pneumatic high-pressure controllers calibrate a wide workload of pressure sensors, covering 2X the pressure ranges at 2X the speed of other controllers.

Calibration baths from Fluke Calibration offer high stability, flexibility , and are a preferred choice of National Metrology Institutes. Contact us today for more information.

The 5790B AC Measurement Standard is a multi-purpose ac measurement and transfer standard designed for the most demanding calibration applications.

PG7000 Ver 2.07h Embedded Software (.bin)TITLEVERUSE WITHPG7000™2.07hAll PG7000 Series modelsInstructions:-Ver 2.02x and 2.03x Users You can upgrade directly to this version with no special considerations.-Ver 2.01x UsersVer 2.02 is a major revision which should be accompanied by hardware changes.-Ver 1.0x UsersVer 2.01 is a major revision which should be accompanied by hardware changes. Contact a Fluke Calibration Authorized Service Center for additional information.Download the file. Run Winflash and...

Fluke Calibration’s Bath Controllers are among the finest in the world and are easy to install, provides stability of ± 0.003 °C & records tiny resistance change accurately.

molbox1+ or molbox1+S v6.01 Embedded Software (.bin)TITLEVERUSE WITHmolbox1+/molbox1+S™6.012016.12.16molbox1+/molbox1+STITLEVERUSE WITHmolbox1+/molbox1+S™6.012016.12.16molbox1+/molbox1+SThis flash is intended ONLY for molbox1+ or molbox1+S with the Fluke Calibration logo: on the front panel, serial number 2000 and above. Attempted use on any other molbox will result in an inoperable molbox unless the molbox1 hardware is upgraded to a molbox1+.For a molbox1 WITHOUT the Fluke Calibration logo,...

molbox1 v5.41 Embedded Software (.bin)TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

MFC-CB v1.00b Embedded Software (.bin)TITLEVERUSE WITHMFC-CB™1.00b2005.10.19MFC-CBTITLEVERUSE WITHMFC-CB™1.00b2005.10.19MFC-CBInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

Download COMPASS® for PressureVersion 4 Releases4.2 (2012.07.27)ADDCP-115%4COMPASS for Pressure now supports the calibration functions of CalTool for RPTs. This functionality allows users to fully adjust and report calibration results for supported Fluke products. Sample tests are included with COMPASS that support automated collection of as received data and as left data with an adjustment in between. Review the CalTool for RPTs application note for details. The COMPASS CalTool implementation supports...

Download COMPASS® for PressureVersion 3 Releases3.00.43 (SP1) (2011.02.11)ADDCP-802Support PG7000 and PG9000 models that respond with FLUKE as the manufacturer.CHGCP-793An automated PG7000/PG9000 system with a PPC and AMH will use ATM as the minimum pressure when exercising in a test that is run in Absolute by ATM.3.00.42 (SP1) (2010.07.07)ADDCP-689Support alternate units of measure and temperature references for the Piston Cylinder effective area.ADDCP-775Added new instruments to the default database.CHGCP-786When...

COMPASS for molbox PC Based Software Demo (.exe)COMPASS for molbox PC Based Software Upgrade (.exe)TITLEVERUSE WITHCOMPASS®for molbox™4.062010.10.28TITLEVERUSE WITHCOMPASS®for molbox™4.062010.10.28molbox1, molbox1+, molbox RFMDescriptionThis download file provides 100 hours of fully functioning use of COMPASS for molbox. Licensed users can download this file to upgrade from a previous version of COMPASS for molbox.  SummaryCOMPASS for molbox is a complete flow calibration software package...

COMPASS for Flow PC Based Software (.exe)Additional Downloads:COMPASS for Flow, PC Based Software, Demo (.exe)COMPASS for Flow, PC Based Software, Upgrade (.exe)Patch to use COMPASS for Flow 4.0 with MET/TRACK 7.3 SP1 (.zip)Patch to use COMPASS for Flow 4.0 with MET/TRACK 8.X (.zip)TITLEVERUSE WITHDOCUMENTSCOMPASS®for Flow™5.1.0molbox1, molbox1+, molbox1+S, molbox RFM, MFC-CB, MFC SwitchboxCOMPASS for Flow uses an on line HTML help system that is installed with the program. Install and run COMPASS...

CalTool for RPTs Free Utility (57.61 MB)TITLEVERUSE WITHDOCUMENTSCalTool™ for RPTs Free Utility1.10.0.252021.05.11PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCK, PPCK+, RPM1, RPM3, RPM4, PPCH, PPCH-G, molbox1, molbox RFMCalTool for RPTs uses an on line HTML help system that is installed with the program. Install and run CalTool then select the [Help] menu to access the help system.(Note: As a result of PC specific security settings the help may not display correctly when viewed over the Internet....

9640A-LPNX Firmware Upgrade (.exe)Additional Downloads:9640A-LPN Firmware Upgrade (.exe)9640A Firmware Upgrade (.exe)Documents:96xxx Firmware Release Notes v 3.21 (.doc)9640A RF Reference Source Firmware Upgrade9640A RF Reference Source Firmware UpgradeThere are three different firmware updates available for the 9640A product range. Instruments can only be updated with firmware at the same major firmware version. That is instruments with 1.xx can only have another version of 1.xx installed on it,...

8588A & 8558A Firmware, Update by USB (.zip)TITLEUSE WITH8588A & 8558AAllThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by USBFluke 85xx update v1.32To update a Fluke 8588A/8558AAn empty USB stick (of greater than 10Mbytes) will be required. This should be formatted using...

Usar uma lupa ao calibrar termômetros de líquido em vidro pode reduzir sua incerteza aumentando a escala do termômetro, proporcionando melhor resolução de visualização.

Fluke Calibration’s 1529 Chub-E4 Thermometer gives you four channels, three major sensor types, lab-quality accuracy, and a ton of great features.

The 5725A Amplifier enhances the 5700A and 5720A Multifunction Calibrators in the ac voltage, ac current, and dc current functions.

271 DDS Function Generator from Fluke Calibration generates high quality sine, square & pulse waveforms over the full frequency range of 0.1 mHz to 10 MHz.

Use the 1586A Super-DAQ to automate temperature sensor calibration The 1586A Super-DAQ Precision Temperature Scanner provides a unique feature for automating sensor calibration that can greatly increase your lab productivity—without a PC and software. When the Super-DAQ is connected to a Fluke Calibration dry-well or fluid bath, it can control the temperature source to run the calibration automatically. You simply program the number of set-point temperatures and their values, select a scan sequence,...

With ratio accuracy as good as 0.06 ppm (0.000015 °C) the Fluke Calibration Super-Thermometer is sure to become a highly valued instrument in your calibration laboratory. It is an ideal choice for applications that previously required the use of complex and expensive bridges, such as calibrating SPRTs, PRTs, and thermistors.10 reasons to choose the Super Thermometer for your high accuracy temperature measurements.1. Accurate enough for the primary lab, economical enough for the secondary labThe...

The triple point of water (TPW) is the only thermometric fixed point used in definitions of both the thermodynamic temperature and the international temperature scale. It is undoubtedly the most important fixed point in thermometry. Some results from the international comparison of TPW cells undertaken a few years ago found differences among TPW cells as large as 0.1 mK or more. This is why we started working to improve the quality of our TPW cells about four years ago.As we know, impurities in the...

Comprehensive workload coverage, intuitive front panel, MET/CAL compatibility.

Os registadores da qualidade da potência trifásicos Fluke 1736 e 1738 são registadores de qualidade de potência versáteis, trifásicos, compatíveis com o Fluke Connect para realizar estudos de qualidade de energia, carga e potência.

The 9142 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

The Fluke 52 II dual input digital thermometer offers fast response and laboratory accuracy (0.05% + 0.3 °C) in a rugged, handheld test tool.

The Fluke 53 II single input digital thermometer with data logging offers fast response and laboratory accuracy (0.05% + 0.3 °C) in a rugged, handheld test tool.