Fluke Ti45FT IR FlexCam® Thermal Imager with IR-Fusion® Technology

  • Fluke Ti45FT IR FlexCam® Thermal Imager With IR-Fusion® Technology | Fluke

Características principais

See exactly what you are viewing
Fluke IR-Fusion® technology links a real world visual image with a thermal image. It merges the two images into one, with the possibility to blend between the two images or create picture-in-picture combinations. Alarm limits can be superimposed over the visible light image to exactly pinpoint the components exceeding a specified temperature limit. Both the visual images and thermal images are available for use in reports. This speeds up documentation by reducing the need to look for individual images taken with a separate digital camera. IR Fusion helps to better identify and report suspect components and enable the repair to be done right the first time.

Large, sharp thermal images
Thanks to the largest display (five-inch) available on this type of thermal imager in combination with low-noise VOx sensors, the Fluke IR FlexCam units produce exceptionally high-quality images making even the smallest temperature differences visible. This is comparable with images normally only obtained on far more expensive instruments.

A sharp image in every situation
The innovative 180 ° articulating lens makes it possible to view and capture images in areas with poor accessibility. The display remains clearly visible while viewing over high objects, under a machine or around immoveable obstructions. The SmartFocus wheel simplifies getting a stable and sharp image. No need to take your hand off the instrument to turn a focus ring.

Make anomalies visible
Thanks to built-in functions like AutoCapture, the IR FlexCam Thermal Imagers help to troubleshoot difficult problems. The instrument is easily set up to automatically capture only those images where a temperature limit is exceeded. This way, difficult to find intermittent problems can be captured and analyzed quicker by concentrating only on the images containing the anomalies.

Analysis and reporting comes standard
The SmartView™ software (supplied with the unit) includes a complete range of infrared image viewing, analysis, annotation and reporting tools. It even allows for customized reports to accommodate specific company work processes or requirements like multiple image reporting and comparisons. To find out more select SmartView on the side navigation of this page.

Radiometric measurement – the ‘data behind the picture’
Fully radiometric thermal imagers capture and store calibrated temperature data for the matrix of thousands of points that make up a thermal image. This makes it possible to perform detailed analysis and change key parameters like emissivity or temperature range either in the field on the camera or in the office using the PC software.

Ti45FTTi40FT
High resolution, low noise VOx detector for high quality images160 x 120
Temperature range to cover broad industrial applications-20 to + 600 ° C (-4 to 1112 °F)
High temperature option1200 ºC (2192 ºF)
High thermal sensitivity for viewing even the smallest temperature differences≤0.08 ºC (80 mK)≤0.09 ºC (90 MK)
180º articulating flexible lens to view images in every situation
Choice of 3 interchangeable lenses to cover every application
Large 5" high contrast color LCD for a clear picture independent of lighting conditions
Fully radiometric for detailed temperature analysis and tracking
SmartFocus for best image quality and accurate temperature measurements
Windows® CE based menu structure for ease of use
Personalized instrument set-up for multiple use
CompactFlash memory cards to store over 1000 IR images plus fully radiometric temperature data
SmartView reporting and analysis software included
AutoCapture for making intermittent problems visible
On-board analysis functions
User defined text annotations for simplified reporting
Built-in visible light (digital) camera
IR/Visible Alarm function
Laser pointer for easy targeting
Flash and torch light for high quality images in dark environments

Keep your Thermal Imager at optimal performance!
Check to see if you have the latest software or firmware version.

Obtenha uma demonstração gratuitaCompre já

Descrição do produto: Fluke Ti45FT IR FlexCam® Thermal Imager with IR-Fusion® Technology

The versatile choice for maintenance and production engineers and technicians

The Fluke Ti4x models feature everything needed for virtually every thermography task. With a 160 x 120 detector and a temperature sensitivity down to 0.08°C (80mK) (NETD) they deliver high resolution images where even the smallest temperature differences can be seen. The units are extremely easy to use through the Windows® CE menu structure and offer an extended troubleshooting feature set to allow on the spot analysis in the field.

The FT models feature the innovative IR-Fusion® technology. IR-Fusion captures a visible light image in addition to the infrared image and takes the mystery out of IR image analysis. It helps to better identify and report suspect components and enable the repair to be done right the first time. To find out more select IR-Fusion on the side navigation of this page.

Typical applications: 

  • Predictive maintenance – Identify electrical and mechanical problems before they cause failure
  • Industrial maintenance – Check whether repairs have been performed successfully
  • Quality control – Examine prototypes and refine thermal management designs
  • Process monitoring – Real-time observation to ensure efficient and safe operation

Especificações: Fluke Ti45FT IR FlexCam® Thermal Imager with IR-Fusion® Technology

Specifications
Imaging performanceThermal
Field of view (FOV)*20 mm lens 23 ° x 17 ° FOV
10.5 mm lens 42 ° x 32 °
54 mm lens 9° x 6°
Spatial resolution (IFOV)*2.60 mrad
Min focus distance*0.15 m
Thermal sensitivity (NETD)Ti45: ≤0.08 °C(80 mK) at 30 °C
Detector data acquisition / Image frequency*30 Hz/60 Hz
FocusSmartFocus; one finger continuous focus
IR digital zoom2x
Detector type160 x 120 Focal Plane Array, Vanadium Oxide (VOx) Uncooled Microbolometer
Spectral band8 µm to 14 µm
Digital image enhancementAutomatic full-time enhanced
On-camera operating modesFull thermal, full visual light or merged thermal-visual images. Picture-in-Picture
Visible light camera1280 x 1024 pixels, full color
Visible light digital zoom2x
Temperature measurementCalibrated temperature range20 ˚C to 600 ˚C (-4 to 1112 ºF) in 3 ranges
Range 120 ˚C to 100 ˚C (-4 to 212 ºF)
Range 2-20 ˚C to 350 ˚C (-4 to 662 ºF)
Range 3250 ˚C to 600 ˚C (482 to 1112 ºF)
Optional - High temperatureUp to 1200 ˚C (2192 ºF)
Range 4500 ˚C to 1200 ˚C (932 to 2192 ºF)
Accuracy±2°C or 2 % (whichever is greater)
Measurement modesCenterpoint, center box (area min/max, average), moveable spots/boxes, user defined field/text annotations, isotherms, automatic hot and cold point detection, visible color alarm above and below
Emissivity correction0.1 to 1.0 (0.01 increments)
Image presentationDigital display5" large high-resolution digital display
LCD backlightSunlight readable color LCD
Video outputRS170 EIA/NTSC or CCIR/PAL composite video
PalettesGrayscale, grayscale inverted, blue red, high contrast, hot metal, ironbow, amber, amber inverted
Optional lenses (only available at time of original purchase)54 mm telephoto lensHigh precision Germanium lens
Field of view (FOV)9º horizontal x 6º vertical
Spatial resolution (IFOV)0.94 mrad
Min focus distance0.6 m
10.5 mm wide angle lensHigh precision Germanium lens
Field of view (FOV)42 º horizontal x 32 º vertical
Spatial resolution (IFOV)4.9 mrad
Min focus distance0.3 m
Image and data storageStorage mediumCompact flash card stores over 1000 IR images (1 GB card standard)
File formats supported14 bit measurement data included. Exportable JPEG, BMP, PNG, GIF, TIFF.
Interfaces and softwareInterfaceCompact flash card reader included
SoftwareSmartView; full analysis and reporting software included
LaserClassificationClass II
Laser targetingLaser dot visible on screen when blending thermal and visible image
Controls and adjustmentsSet-up controlsDate/time, temperature units C/F, language, scale, LCD intensity (high/normal/low)
Image controlsLevel, span, auto adjust (continuous/manual)
On-screen indicatorsBattery status, target emissivity, background temperature and real time clock
Power, battery lifeBattery typeLi-Ion smart battery, rechargeable, field-replaceable
Battery operating time3 hours continuous operation (2 hours with IR-Fusion engaged)
Battery charging2 bay intelligent charger powered via AC outlet
AC operationAC adapter 110/220 VAC, 50/60 Hz (Ti45 only)
Power savingAutomatic shutdown and sleep modes (user specified)
Environmental and mechanical designOperating temperature-10 °C to +50 °C (14 °F to 122 °F)
Storage temperature-40 °C to +70 °C (-40 °F to 158 °F)
Relative humidityOperating and storage 10% to 95%, non-condensing
Water and dust resistantIP54
Weight (including batteries)1.95 kg (4.3 lbs)
Camera size (HxWxD)162 x 262 x 101 mm (6.5" x 10.5" x 4.0")
OtherWarranty2 years

7.5 Hz models are available in some geographies. Check with your Fluke sales representative for additional information.

Modelos: Fluke Ti45FT IR FlexCam® Thermal Imager with IR-Fusion® Technology

Fluke Ti45FT-20

Câmara de Imagens Térmicas IR com IR-Fusion

Compre

Includes:

  • Heavy duty carrying case
  • 2 rechargeable battery packs
  • Battery charger
  • AC adapter
  • Video cable
  • 512 MB compact flash card
  • Compact flash card reader and USB cable
  • Neck strap
  • SmartView reporting and analysis software on CD
  • User manual on CD
  • Calibration certificate