Scanner de temperatura de precisão 1586A-Super-DAQ

  • Fluke 1586A Super-DAQ Precision Temperature Scanner

Características principais

  • Meça termopares, PRT, termístores, tensão DC, corrente DC e resistência, com até 40 entradas universais isoladas.
  • Medições de precisão (PRT ± 0,005 ºC, termopares: ± 0,5 ºC, termístores: ± 0,002 ºC).
  • Digitalize até 10 canais por segundo, excelente para aplicações de alta velocidade.
  • Quatro modos de funcionamento - Digitalizar, Monitorizar, Medir, Multímetro Digital (DMM) e inclui tendências de cor em tempo real para até quatro canais.
  • Regista até 20 MB de dados e ficheiros de configuração na memória não volátil interna ou numa unidade USB externa, com perfis de administrador e utilizador para proteção de dados e rastreabilidade de testes.

Descrição do produto: Scanner de temperatura de precisão 1586A-Super-DAQ

Scanner de temperatura de precisão Super-DAQ 1586A

O Super-DAQ 1586A coleta medições elétricas e de temperatura precisas e com registro de data e hora para a análise de dados por técnicos, engenheiros e equipe de controle de qualidade para verificar o controle de processo, analisar os sistemas interativos, garantir a conformidade com padrões de qualidade ou correlacionar eventos relacionados para P&D ou solução de problemas. Os dados de medição e as estatísticas podem ser vistos em formato tabulado para todos os canais ativos. Com o recurso de criação de gráficos, é possível montar gráficos de até quatro canais ao mesmo tempo, facilitando a uma rápida avaliação dos resultados e da configuração do teste antes de analisar os dados em um computador.  

Quando configurado com o multiplexador DAQ-STAQ, o Super-DAQ oferece a precisão das melhores leituras de termômetros de referência para calibração de PRTs, RTDs, termistores ou termopares. A eficiência no laboratório pode ser aumentada quando o Super-DAQ é conectado a um bloco seco ou banho da Fluke Calibration e as rotinas de teste do sensor automatizado são executadas.

O 1586 é ideal para diversas aplicações, como mapeamento térmico, validação de temperatura, calibração do sensor de processos e muito mais. Essas aplicações são encontradas em diversos setores, inclusive no farmacêutico, biotecnologia, processamento de alimentos, aeroespacial e automotivo.
Há seis recursos principais que diferenciam o Super-DAQ dos outros produtos dessa classe:

  1. Melhor precisão da medição da temperatura
  2. Configuração flexível para a fábrica ou o laboratório
  3. Vários modos de operação
  4. Criação de gráficos coloridos em tempo real
  5. Portabilidade e segurança dos dados
  6. Calibração do sensor automatizado
1.  Melhor precisão da medição da temperatura

O Super-DAQ 1586A lê PRTs, termopares e termistores com a melhor precisão do setor:
  • PRTs ± 0,005 °C (usando multiplexador DAQ-STAQ externo)
  • Termopares: ± 0,5 °C (usando CJC interno e módulo de alta capacidade)
  • Termistores: ± 0,002 °C
 2. Configuração flexível para a fábrica ou o laboratório

Para aplicações em fábricas, o Super-DAQ é configurado com o módulo interno de alta capacidade. Conectar os termopares ou RTDs aos terminais de entrada pode ser demorado, especialmente se você estiver usando vários sensores do mesmo tipo para uma tarefa, e depois for trocar para outro tipo de sensor para outra tarefa. O módulo interno de alta capacidade permite que você pré-configure vários módulos de entrada e apenas troque um módulo pelo outro, dependendo dos seus requisitos de testes. Recupere uma configuração de teste armazenada e faça a troca de forma ainda mais rápida. E, se você preferir, pode sempre medir uma variedade de tipos de entrada diferentes, todas ao mesmo tempo em um único módulo de alta capacidade, inclusive termopares, RTDs, tensão, resistência ou corrente.  

Para um laboratório de calibração no qual a precisão é fundamental, o Super-DAQ é mais adequado quando configurado com o multiplexador DAQ-STAQ. Os DAQ-STAQ externo possui terminais termopares de miniplugue, cada um com seu próprio sensor de junção de referência, e mini DWF patenteado, terminais de entrada revestidos em ouro, que aceitam fios expostos, bornes com orelha ou terminais miniplugue com orelha. Conecte e desconecte com facilidade PRTs, termistores e termopares para calibração de temperaturas de bancada. Pode ser empilhado sobre o 1586 para reduzir o espaço em laboratórios muito cheios. A flexibilidade para configurar o Super-DAQ para fábrica ou laboratório reduz suas necessidades e custos com equipamentos.

 3. Vários modos de operação

O Super-DAQ pode operar em quatro modos que lhe permitem varrer, monitorar, medir ou funcionar como um multímetro digital a partir de um único instrumento. Faça varredura sequencial de canais com base em um teste definido pelo usuário. Monitore um único canal durante uma varredura, sem interrompê-la. Meça e registre dados em um único canal, sem precisar de um arquivo de teste pré-configurado. Ou no modo DMM, use o canal do painel frontal como um multímetro digital de bancada comum para medir rapidamente a tensão CC, a corrente CC, ou a resistência de 2 ou 4 fios sem precisar configurar o canal.

 4. Criação de gráficos coloridos em tempo real

A maioria dos sistemas de aquisição de dados lhe permite ver os dados apenas em um canal. Mas agora o Super-DAQ lhe permite ver os dados em tempo real, para todos os canais, em formato de tabela. Ou ainda, você pode criar gráficos coloridos de até quatro canais ao mesmo tempo. Você pode ampliar ou reduzir o zoom para ver dados de interesse e monitorar as tendências. Um modo de histórico lhe permite rolar pelos dados coletados em um arquivo de varredura, tudo sem precisar de um computador ou programas caros de criação de gráficos. Alterne entre a visualização de gráfico e a visualização de tabela para os diversos dados e estatísticas de medição

 5. Portabilidade e segurança dos dados

O Super-DAQ inclui uma memória interna de 20 MB que pode armazenar mais de 75.000 leituras com registro de data e hora. Os arquivos de dados e configuração podem ser facilmente movidos para um computador para análise usando um pen drive ou pela rede, usando uma conexão de interface LAN. O Super-DAQ também inclui dois níveis de segurança de dados para impedir que usuários não autorizados adulterem ou forjem dados de teste ou arquivos de configuração. Esse recurso de segurança é especialmente importante em setores que são regulamentados por órgãos do governo, nos quais é exigido o rastreamento dos dados.

 6. Calibração do sensor automatizado

Com o recurso de teste automatizado, você pode automatizar a calibração do sensor sem precisar de um computador ou software. Quando conectado a um bloco seco ou fluido de banho pela interface RS-232, o Super-DAQ assume o controle da origem de temperatura e executa sua calibração automaticamente. Basta programar o número das temperaturas de ponto de definição e seus valores, selecionar uma sequência de varredura (linear, alternada, vertical), atribuir um canal de referência e definir a banda de estabilidade necessária. O Super-DAQ monitora a estabilidade da origem da temperatura pelo canal de referência, coleta os dados após a estabilização e segue para a próxima temperatura de ponto de definição. Depois de configurar e iniciar o teste, você pode continuar a trabalhar em outras tarefas. O Super-DAQ acaba de facilitar muito seu dia. 

Especificações: Scanner de temperatura de precisão 1586A-Super-DAQ

General Specifications
Mains Voltage100 V Setting: 90 V to 110 V
120 V Setting: 108 V to 132 V
220 V Setting: 198 V to 242 V
240 V Setting: 216 V to 264 V
Frequency47 Hz to 440 Hz
Power Consumption 36 VA peak (24 W average)
Environment TemperatureOperating: 0 °C to 50 °C
Full accuracy: 18 °C to 28 °C
Storage: −20 °C to 70 °C
Warm-up: 1 hour to full accuracy specifications
Relative Humidity (non-condensing)Operating:  0 °C to 30 °C <80 %;
                   30 °C to 50 °C <50 %
Storage: −20 °C to 70 °C <95 %
AltitudeOperating: 2,000 m
Storage: 12,000 m
Vibration and Shock Complies with MIL-PRF-28800F Class 3
Channel CapacityTotal analog channels: 45
Voltage/resistance channels: 41
Current channels:  5
Digital I/O: 8 bits
Totalizer: 1
Alarm outputs: 6
Trigger input: 1
Channel Input Connector Types1586A Channel 001 (front panel): gold pins, bare wire, spade lugs, banana plugs
DAQ-STAQ Multiplexer: gold pins, bare wire, mini spade lugs, mini banana plugs, mini-jack thermocouple
High-Capacity Module: gold pins, bare wire
Input Protection 50 V all functions, terminals and ranges
Math ChannelsNumber of channels: 20
Operations: sum, difference, multiply, divide, polynomial, power, square root, reciprocal, exponential, logarithm, absolute value, average, maximum, minimum
Triggersinterval, external (trigger input), alarm, remote (bus), manual, automated test
MemoryScan data RAM: 75,000 readings with timestamp
Data/Setup flash memory: 20 MB
USB Host PortConnector type: Type A
Function: Memory
File system: FAT32
Memory capacity: 32 GB
USB Device PortConnector type: Type B
Class: Instrument
Function: Control and data transfer
Command protocol: SCPI
LANFunction: Control and data transfer
Network protocols: Ethernet 10/100, TCP/IP
Command protocol: SCPI
RS-232Connector: D-sub 9 pin (DE-9)
Baud rates: 1200, 2400, 4800, 9600, 19200, 38400
Function: Temperature source control output
DimensionsHeight: 150 mm
Width: 245 mm
Depth: 385 mm Weight: 6 kg (typical configuration)
Shipping Weight: 9.5 kg (typical configuration)
ConformityCE, CSA, IEC 61010 3rd ed.
Measurement Specifications
Accuracy specifications generally apply with medium and slow sample rates (unless otherwise noted), after a warm-up time of 1 hour, and within an environment temperature range of 18 °C to 28 °C, and may depend on the channel. The confidence level for accuracy specifications is 95 % within 1 year of calibration.
Scan rateFast: 10 channels per second max (0.1 seconds per channel) Medium: 1 channel per second (1 second per channel)
Slow: 4 seconds per channel
Display Resolution6 1/2 digits (see Measurement Characteristics tables below to find the display resolution of temperature readings)
PRT/RTD
Temperature Range−200 °C to 1200 °C (depending on the sensor)
Resistance Range0 Ω to 4 kΩ
Offset Compensation0 Ω to 400 Ω, 4-wire: automatic current reversal
400 Ω to 4000 Ω or 3-wire: none
Source Current Reversal Interval (0 Ω  to 400 Ω range) Fast sample rate: 2 ms
Medium sample rate: 250 ms
Slow sample rate: 250 ms
Maximum Lead Resistance (4-wire Ω) 2.5 % of range per lead for 400 Ω and 4 kΩ ranges
PRT/RTD Resistance Accuracy
Accuracy is given as % of measurement or ohms, whichever is greater. Basic accuracy is for 4-wire PRT/RTD. When using 3-wire PRT/RTD add 0.013 Ω to the accuracy specification for internal resistance mismatch and voltage offset if using Channel 1, or add 0.05 Ω if using channels x01 through x20. If the environment temperature is outside the specified range, multiply the temperature coefficient numbers by the temperature deviation and add to the accuracy specification.
RangeSample RateDAQ-STAQ Module and Channel 1High-Capacity ModuleT.C./ °C Outside 18 °C to 28 °C
0 Ω to 400 ΩSlow0.002 % or 0.0008 Ω0.003 % or 0.003 Ω0.0001 % or 0.0008 Ω
Medium0.002 % or 0.002 Ω0.003 % or 0.003 Ω0.0001 % or 0.0008 Ω
Fast0.002 % or 0.005 Ω0.003 % or 0.006 Ω0.0001 % or 0.0008 Ω
400 Ω to 4 kΩSlow0.004 % or 0.06 Ω0.006 % or 0.06 Ω0.0001 % or 0.008 Ω
Medium0.004 % or 0.1 Ω0.006 % or 0.1 Ω0.0001 % or 0.008 Ω
Fast0.004 % or 0.18 Ω0.006 % or 0.18 Ω0.0001 % or 0.008 Ω
PRT/RTD Temperature Accuracy
Accuracy is for 4-wire 100 Ω nominal PRT/RTD. When using 3-wire PRT/RTD add 0.039 °C to the accuracy specification for internal resistance mismatch and voltage offset if using Channel 1, or add 0.15 °C if using channels x01 through x20. If the environment temperature is outside the specified range, multiply the temperature coefficient number by the temperature deviation and add to the accuracy specification. Linear interpolation may be used between points in the table. Specifications do not include sensor accuracy. The practical range of temperature measurement depends on the sensor and characterization.
Sample RateTemperatureDAQ-STAQ Module and Channel 1High-Capacity ModuleT.C./ °C Outside 18 °C to 28 °C
Slow−200 °C0.002 °C0.008 °C0.002 °C
0 °C0.005 °C0.008 °C0.003 °C
300 °C0.012 °C0.018 °C0.006 °C
600 °C0.02 °C0.03 °C0.01 °C
Medium−200 °C0.005 °C0.008 °C0.002 °C
0 °C0.005 °C0.008 °C0.003 °C
300 °C0.012 °C0.018 °C0.006 °C
600 °C0.02 °C0.03 °C0.01 °C
Fast−200 °C0.013 °C0.015 °C0.002 °C
0 °C0.013 °C0.015 °C0.003 °C
300 °C0.014 °C0.018 °C0.006 °C
600 °C0.02 °C0.03 °C0.01 °C
PRT/RTD Measurement Characteristics
 Temperature Display Resolution 
RangeSlow / Medium Sample RateFast Sample RateSource Current
0 Ω to 400 Ω0.001 °C0.01 °C±1 mA
400 Ω to 4 kΩ0.001 °C0.01 °C0.1 mA
Thermistor
Temperature Range −200 °C to 400 °C (depending on the sensor)
Resistance Range 0 Ω to 1 MΩ
Thermistor Resistance Accuracy
Accuracy is given as ± (% of measurement + Ω). The basic accuracy specification is for 4-wire thermistor, slow sample rate. When using medium or fast sample rate, add the number given in the table to the accuracy specification. If the environment temperature is outside the specified range, multiply the temperature coefficient numbers by the temperature deviation and add to the accuracy specification. For 2-wire thermistor add 0.02 Ω internal resistance if using Channel 1 or
1.5 Ω if using channels x01 through x20, and add external lead wire resistance.
RangeSlow Sample RateMedium Sample Rate RateFast Sample RateT.C./ °C Outside18 °C to 28 °C
0 Ω to 2.2 kΩ0.004 % + 0.2 Ωadd 0.3 Ωadd 1 Ω0.0005 % + 0.05 Ω
2.1 kΩ to 98 kΩ0.004 % + 0.5 Ωadd 0.5 Ωadd 1.3 Ω0.0005 % + 0.1 Ω
95 kΩ to 1 MΩ0.015 % + 5 Ωadd 5 Ωadd 13 Ω0.001 % + 2 Ω
Thermistor Temperature Accuracy
Accuracy specifications are for 4-wire thermistor. When using 2-wire thermistor, add the number given in the table to the specification for internal resistance. If the environment temperature is outside the specified range, increase the accuracy specification by 25 % for every 1 °C outside the specified environment temperature range. Specifications do not include sensor accuracy. The practical range of temperature measurement depends on the sensor.
Accuracy 2.2 kΩ Thermistor
TemperatureSlowSample RateMediumSample RateFastSample Rate2-wire
−40 °C0.001 °C0.001 °C0.01 °Cadd 0.001 °C
0 °C0.003 °C0.004 °C0.01 °Cadd 0.004 °C
25 °C0.006 °C0.011 °C0.02 °Cadd 0.016 °C
50 °C0.008 °C0.018 °C0.04 °Cadd 0.05 °C
100 °C0.047 °C0.114 °C0.28 °Cadd 0.34 °C
150 °C0.23 °C0.56 °C1.34 °Cadd 1.7 °C
Accuracy 5 kΩ Thermistor
TemperatureSlow Sample RateMedium Sample RateFast Sample Rate2-wire
−40 °C0.003 °C0.004 °C0.01 °Cadd 0.001 °C
0 °C0.002 °C0.002 °C0.01 °Cadd 0.002 °C
25 °C0.004 °C0.006 °C0.01 °Cadd 0.007 °C
50 °C0.005 °C0.009 °C0.02 °Cadd 0.022 °C
100 °C0.022 °C0.052 °C0.13 °Cadd 0.16 °C
150 °C0.096 °C0.24 °C0.57 °Cadd 0.7 °C
Accuracy 10 kΩ Thermistor
TemperatureSlow Sample RateMedium Sample RateFast Sample Rate2-wire
−40 °C0.003 °C0.004 °C0.01 °Cadd 0.001 °C
0 °C0.002 °C0.002 °C0.01 °Cadd 0.002 °C
25 °C0.003 °C0.004 °C0.01 °Cadd 0.004 °C
50 °C0.005 °C0.009 °C0.02 °Cadd 0.011 °C
100 °C0.011 °C0.024 °C0.06 °Cadd 0.067 °C
150 °C0.04 °C0.098 °C0.24 °Cadd 0.29 °C
Thermistor Measurement Characteristics
 Temperature Display Resolution 
RangeSlow / Medium
Sample Rate
Fast
Sample Rate
Source Current
0 Ω to 2.2 Ω0.0001 °C0.001 °C10 μA
2.1 Ω to 98 Ω0.0001 °C0.001 °C10 μA
95 Ω  to 1 MΩ0.0001 °C0.001 °C1 μA
Thermocouple
Temperature Range−270 °C to 2315 °C (depending on the sensor)
Voltage Range−15 mV to 100 mV
Thermocouple Voltage Accuracy
Accuracy is given as ± (|% of measurement| + μV). Basic accuracy specification is for medium or slow sample rate. When using a fast sample rate add the number given in the table to the accuracy specification. If the environment temperature is outside the specified range, multiply the temperature coefficient numbers by the temperature deviation and add to the accuracy specification.
RangeAccuracy Channel 1Ch. x01 – x20Fast Sample RateT.C./ °C Outside
18 °C to 28 °C
−15 mV to 100 mV0.004 % + 4 μVadd 2 μVadd 1 μV0.0005 % + 0.0005 mV
Thermocouple Reference Junction Accuracy
ModuleCJC AccuracyT.C./ °C Outside
18 °C to 28 °C
DAQ-STAQ Module0.25 °C0.02 °C
High-Capacity Module0.6 °C0.05 °C
Thermocouple Temperature Accuracy
Accuracy specifications apply using medium or slow sample rate. When using fast sample rate, increase the accuracy specification by 25 %. If the environment temperature is outside the specified range, increase the accuracy specification by 12 % for every 1 °C outside the specified environment temperature range. Accuracy with fixed/external CJC does not include the accuracy of the reference junction temperature. Linear interpolation may be used between points in the table. Specifications do not include sensor accuracy. The practical range of temperature measurement depends on the sensor.
Type
(Range)
TemperatureAccuracy
Fixed / External CJCInternal CJC
Channel 1Ch. x01 – x20DAQ-STAQ ModuleHigh-Capacity
Module
K
−270 °C to
1372 °C
−200 °C
0 °C
1000 °C
0.28 °C
0.10 °C
0.14 °C
0.41 °C
0.15 °C
0.20 °C
0.76 °C
0.29 °C
0.32 °C
1.60 °C
0.62 °C
0.64 °C
T
−270 °C to
400 °C
−200 °C
0 °C
200 °C
400 °C
0.27 °C
0.10 °C
0.08 °C
0.08 °C
0.40 °C
0.15 °C
0.12 °C
0.11 °C
0.76 °C
0.30 °C
0.23 °C
0.20 °C
1.60 °C
0.65 °C
0.47 °C
0.41 °C
R
−50 °C to
1768 °C
0 °C
300 °C
1200 °C
1600 °C
0.76 °C
0.42 °C
0.33 °C
0.34 °C
1.13 °C
0.63 °C
0.47 °C
0.49 °C
1.16 °C
0.64 °C
0.48 °C
0.50 °C
1.28 °C
0.71 °C
0.52 °C
0.54 °C
S
−50 °C to
1768 °C
0 °C
300 °C
1200 °C
1600 °C
0.74 °C
0.45 °C
0.37 °C
0.39 °C
1.11 °C
0.67 °C
0.54 °C
0.56 °C
1.14 °C
0.68 °C
0.55 °C
0.57 °C
1.26 °C
0.76 °C
0.60 °C
0.63 °C
J
−210 °C to
1200 °C
−200 °C
0 °C
1000 °C
0.20 °C
0.08 °C
0.11 °C
0.29 °C
0.12 °C
0.14 °C
0.65 °C
0.28 °C
0.25 °C
1.41 °C
0.61 °C
0.53 °C
N
−270 °C to
1300 °C
−200 °C
0 °C
500 °C
1000 °C
0.42 °C
0.15 °C
0.12 °C
0.14 °C
0.62 °C
0.23 °C
0.17 °C
0.19 °C
0.90 °C
0.34 °C
0.24 °C
0.26 °C
1.69 °C
0.64 °C
0.44 °C
0.45 °C
E
−270 °C to
1000 °C
−200 °C
0 °C
300 °C
700 °C
0.17 °C
0.07 °C
0.06 °C
0.08 °C
0.25 °C
0.10 °C
0.09 °C
0.10 °C
0.64 °C
0.27 °C
0.21 °C
0.21 °C
1.42 °C
0.61 °C
0.46 °C
0.45 °C
B
100 °C to
1820 °C
300 °C
600 °C
1200 °C
1600 °C
1.32 °C
0.68 °C
0.41 °C
0.38 °C
1.97 °C
1.02 °C
0.60 °C
0.55 °C
1.97 °C
1.02 °C
0.60 °C
0.55 °C
1.97 °C
1.02 °C
0.60 °C
0.55 °C
C
0 °C to
2315 °C
600 °C
1200 °C
2000 °C
0.23 °C
0.28 °C
0.44 °C
0.33 °C
0.40 °C
0.60 °C
0.37 °C
0.45 °C
0.66 °C
0.54 °C
0.63 °C
0.91 °C
D
0 °C to
2315 °C
600 °C
1200 °C
2000 °C
0.22 °C
0.26 °C
0.39 °C
0.32 °C
0.36 °C
0.53 °C
0.34 °C
0.39 °C
0.56 °C
0.44 °C
0.49 °C
0.69 °C
G
0 °C to
2315 °C
600 °C
1200 °C
2000 °C
0.24 °C
0.22 °C
0.33 °C
0.36 °C
0.32 °C
0.46 °C
0.36 °C
0.32 °C
0.46 °C
0.36 °C
0.33 °C
0.46 °C
L
−200 °C to
900 °C
−200 °C
0 °C
800 °C
0.13 °C
0.08 °C
0.09 °C
0.19 °C
0.12 °C
0.12 °C
0.45 °C
0.28 °C
0.23 °C
0.99 °C
0.62 °C
0.48 °C
M
−50 °C to
1410 °C
0 °C
500 °C
1000 °C
0.11 °C
0.10 °C
0.10 °C
0.16 °C
0.15 °C
0.14 °C
0.30 °C
0.25 °C
0.21 °C
0.64 °C
0.51 °C
0.41 °C
U
−200 °C to
600 °C
−200 °C
0 °C
400 °C
0.25 °C
0.10 °C
0.08 °C
0.37 °C
0.15 °C
0.11 °C
0.71 °C
0.30 °C
0.20 °C
1.48 °C
0.63 °C
0.40 °C
W
0 °C to
2315 °C
600 °C
1200 °C
2000 °C
0.24 °C
0.22 °C
0.33 °C
0.36 °C
0.32 °C
0.46 °C
0.36 °C
0.32 °C
0.46 °C
0.36 °C
0.33 °C
0.46 °C
Thermocouple Measurement Characteristics
RangeTemperature Display Resolution
Slow / Medium
Sample Rate
Fast
Sample Rate
−270 °C to 2315 °C0.01 °C0.1 °C
DC Voltage
Maximum Input50 V on any range
Common Mode Rejection140 dB at 50 Hz or 60 Hz (1 kΩ unbalance in LOW lead) ±50 V peak maximum
Normal Mode Rejection55 dB for power line frequency ±0.1 %, ±120 % of range peak maximum
A/D Linearity2 ppm of measurement + 1 ppm of range
Input Bias Current30 pA at 25 °C
DC Voltage Accuracy
Accuracy is given as ± (% measurement + % of range). Basic accuracy specification is for Channel 1, medium or slow sample rate. For channels x01 through x20 or when using Fast sample rate, add the numbers given in the table to the accuracy specification. If the environment temperature is outside the specified range, multiply the temperature coefficient numbers by the temperature deviation and add to the accuracy specification.
RangeAccuracy Channel 1Ch. x01 – x20Fast Sample RateT.C./ °C Outside
18 °C to 28 °C
±100 mV0.0037 % + 0.0035 %add 2 μadd 0.0008 % of range0.0005 % + 0.0005 %
±1 V0.0025 % + 0.0007 %add 2 μadd 0.0008 % of range0.0005 % + 0.0001 %
±10 V0.0024 % + 0.0005 %add 0.0008 % of range0.0005 % + 0.0001 %
±50 V0.0038 % + 0.0012 %add 0.0008 % of range0.0005 % + 0.0001 %
DC Voltage Input Characteristics
 ResolutionInput Impedance
RangeSlow / MediumFast
±100 mV0.1 μ1 μ10 GΩ [1]
±1 V1 μ10 μ10 GΩ [1]
±10 V10 μ100 μ10 GΩ [1]
±50 V100 μ1 mV10 MΩ ±1 %
[1] - Input beyond ±12 V is clamped. The clamp current is up to 3 mA.
DC Current
Input Protection 0.15 A resettable PTC
DC Current Accuracy
Accuracy is given as ± (% measurement + % of range). Basic accuracy specification is for medium or slow sample rate. When using a fast sample rate, add the number given in the table to the accuracy specification. If the environment temperature is outside the specified range, multiply the temperature coefficient numbers by the temperature deviation and add to the accuracy specification.
RangeAccuracyFast Sample RateT.C./ °C Outside
18 °C to 28 °C
±100 μA0.015 % + 0.0035 %add 0.0008 % of range0.002 % + 0.001 %
±1 mA0.015 % + 0.0011 %add 0.0008 % of range0.002 % + 0.001 %
±10 mA0.015 % + 0.0035 %add 0.0008 % of range0.002 % + 0.001 %
±100 mA0.015 % + 0.0035 %add 0.0008 % of range0.002 % + 0.001 %
DC Current Input Characteristics
 Resolution 
RangeSlow / MediumFastBurden Voltage
±100 μA0.1 nA1 nA<1 mV
±1 mA1 nA10 nA<1 mV
±10 mA10 nA100 nA<1 mV
±100 mA100 nA1 μA<1 mV
Resistance
Max. Lead Resistance (4-wire ohms) 10 Ω per lead for 100 Ω and 1 kΩ ranges. 1 kΩ per lead on all other ranges.
Resistance Accuracy
Accuracy is given as ± (% measurement + % of range). Basic accuracy specification is for 4-wire resistance, medium or slow sample rate. For 2-wire resistance add 0.02 Ω internal resistance if using Channel 1, or 1.5 Ω if using channels x01 through x20, and add external lead wire resistance. When using Fast sample rate, add the numbers given in the table to the accuracy specification. If the environment temperature is outside the specified range, multiply the Temperature Coefficient numbers by the temperature deviation and add to the accuracy specification
RangeAccuracyFast Sample RateT.C./ °C Outside
18 °C to 28 °C
100 Ω0.004 % + 0.0035 %add 0.001 % of range[1]0.0001 % + 0.0005 %
1 kΩ0.003 % + 0.001 %add 0.001 % of range[2]0.0001 % + 0.0001 %
10 kΩ0.004 % + 0.001 %add 0.001 % of range0.0001 % + 0.0001 %
100 kΩ0.004 % + 0.001 %add 0.001 % of range0.0001 % + 0.0001 %
1 MΩ0.004 % + 0.001 %add 0.006 % of reading plus 0.0008 % of range0.0005 % + 0.0002 %
10 MΩ0.015 % + 0.001 %add 0.2 % of reading plus 0.0008 % of range0.001 % + 0.0004 %
100 MΩ0.8 % + 0.01 %add 0.01 % of range0.05 % + 0.002 %
Notes:
For conducted disturbances on mains input >1 V from 10 MHz to 40 MHz, add 0.6 % of range. For disturbances >3 V, accuracy is unspecified.

[1] 0.15 % of range for 2-wire
[2] 0.015 % of range for 2-wire
Resistance Input Characteristics
RangeResolution
Slow / Medium
FastSource Current
(open-circuit voltage)
100 Ω0.1 mΩ1 mΩ1 mA (4 V)
1 kΩ1 mΩ10 mΩ1 mA (4 V)
10 kΩ10 mΩ100 mΩ100 μA (6 V)
100 kΩ100 mΩ1 Ω100 μA (12 V)
1 MΩ1 Ω10 Ω10 μA (12 V)
10 MΩ10 Ω100 Ω1 μA (12 V)
100 MΩ100 Ω1 kΩ0.1 μA (12 V)
Digital I/O
Absolute Voltage Range  –4 V to 30 V
Input Minimum Logic High2.0 V
Input Maximum Logic Low 0.7 V
Output Type open drain active low
Output Logic Low (<1 mA) 0 V to 0.7 V
Maximum Sink Current 50 mA
Output Resistance 47 Ω
Totalizer
Absolute Voltage Range –4 V to 30 V
Minimum Logic High 2.0 V
Maximum Logic Low0.7 V
Minimum Pulse Width50 μs
Maximum Frequency 10 kHz
Debounce Time1.7 ms
Maximum Count1048575 (20 bits)
Trigger
Absolute Voltage Range –4 V to 30 V
Minimum Logic High 2.0 V
Maximum Logic Low0.7 V
Minimum Pulse Width50 μs
Maximum Latency100 ms
Alarm Output
Absolute Voltage Range –4 V to 30 V
Output Type open drain active low
Output Logic Low (<1 mA)0 V to 0.7 V
Maximum Sink Current 50 mA
Output Resistance 47 Ω
1586-2588 DAQ-STAQ Input Module Specifications
Maximum Input50 V
Offset Voltage<2 μV
3-Wire Internal Resistance Mismatch <50 mΩ
Basic CJC Accuracy 0.25 °C
1586-2586 High-Capacity Input Module Specifications
Maximum Input50 V
Offset Voltage<2 μV
3-Wire Internal Resistance Mismatch <50 mΩ
Basic CJC Accuracy 0.6 °C

Modelos: Scanner de temperatura de precisão 1586A-Super-DAQ

1586A/1DS
Scanner de temperatura de precisão Super-DAQ, 1 multiplexador DAQ-STAQ

Compre
1586A/1DS/C
Super-DAQ Precision Temperature Scanner, 1 DAQ-STAQ Multiplexer, Accredited Calibration

Compre
1586A/2DS
Scanner de temperatura de precisão Super-DAQ, 2 multiplexadores DAQ-STAQ

Compre
1586A/2DS/C
Super-DAQ Precision Temperature Scanner, 2 DAQ-STAQ Multiplexers, Accredited Calibration

Compre
1586A/DS-HC
Scanner de temperatura de precisão Super-DAQ, 1 módulo de alta capacidade, 1 multiplexador DAQ-STAQ

Compre
1586A/DSHC/C
Super-DAQ Precision Temperature Scanner, 1 High-Capacity Module, 1 DAQ-STAQ Multiplexer, Accredited Calibration

Compre
1586A/1HC
Scanner de temperatura de precisão Super-DAQ, 1 módulo de alta capacidade

Compre
1586A/1HC/C
Super-DAQ Precision Temperature Scanner, 1 HIgh-Capacity Module, Accredited Calibration

Compre
1586A/2HC
Scanner de temperatura de precisão Super-DAQ, 2 módulos de alta capacidade

Compre
1586A/2HC/C
Super-DAQ Precision Temperature Scanner, 2 High-Capacity Modules, Accredited Calibration

Compre
2680A-APSW v6.0
Fluke DAQ 6.0 Application Software for Fluke data acquisition products.

Compre
TQSOFT-IQ/OQ
TQSoft Pharma Process Analysis and Validation Software

Compre
TQAERO
TQAero Furnace Validation Software

Compre
VAL-BNDR-TQS
Validation Reference Binder

Compre
Fale com o nossoAssistente da Fluke
Limpar o chat
[object Object]