Fluke Calibration P3200 Hydraulic Deadweight Tester

  • Fluke Calibration P3200 Hydraulic Deadweight Tester | Fluke

Fitur utama

  • Rentang tekanan hingga 10.000 psi (700 bar)
  • standar akurasi pembacaan 0,015% (0,008% opsional)
  • Format piston tunggal atau ganda
  • Pompa tangan standar bawaan
  • spirit level terpasang dengan adjustable feet
  • Unit dapat disesuaikan dengan FOC gravitasi lokal

Ikhtisar Produk: Fluke Calibration P3200 Hydraulic Deadweight Tester

Model P3200 tersedia dalam format piston tunggal atau ganda untuk meningkatkan rentang pengoperasian. Satuan dapat disediakan dalam psi, bar, kgf/cm², dan MPa. Perangkat yang tangguh ini sangat akurat, cepat, dan mudah digunakan. Unit memiliki pompa pengering uap untuk penerapan volume besar, indikator apung piston dan tekanan sekrup kualitas tinggi untuk kontrol tekanan halus.

Opsi

Perangkat lunak PressCal untuk perhitungan tekanan dan pembuatan sertifikat

Spesifikasi: Fluke Calibration P3200 Hydraulic Deadweight Tester

Rentang Tekanan

Dioperasikan dengan air terdistilasiRentang hingga 10.000 psi (700 bar)

Akurasi

Akurasi±0,015% pembacaan (±0,008% opsional)

*Akurasi berdasarkan % pembacaan dari 10% sampai 100% rentang piston ketika digunakan sesuai dengan koreksi yang tertera dalam sertifikat kalibrasi. Di bawah 10% ± (kelas akurasi) x 10% rentang piston.

Material Konstruksi

Material berat standarBaja tahan karat austenitik non-magnetik seri 3
Densitas berat7,8 g/cm³
Berat fraksional opsionalAluminium yang diberi larutan panas
Densitas berat2,7 g/cm³
Material pistonTungsten karbida dengan pengikat nikel
Densitas- 15,0 g/cm³
Material silinderBaja tempa martensitik
Tungsten karbida (air di atas 500 psi, 35 bar)
Koefisien muai termalPiston/silinder minyak 16,5 ppm/°C
Air (di atas 500 psi, 35 bar) 11 ppm/°C

Umum

Adaptor port pengujian1/8, 1/4, 3/8 dan 1/2
NPT atau BSP
Berat instrumen36 lbs (16 kg)
Ukuran perangkat(P x L x T) 17,5 in x 12 in x 8,5 in (440 mm x 300 mm x 215 mm)
Berat massa yang ditetapkan (umumnya)80 lbs (36 kg)
Volume penampung150 cc
Pelepasan tekanan sekrup5,5 cc
Pelepasan pompa4,7 cc per ayunan
Material segel cincin OBuna N sebagai standar, Viton dan EPDM tersedia

Peningkatan Berat

Peningkatan Berat Standar MinimumHingga 500 psi (35 bar): 1 psi (0,1 bar)
500 sampai 5000 psi (35 sampai 350 bar): 10 psi (1 bar)
5000 sampai 20.000 psi (350 sampai 1400 bar): 20 psi (2 bar)
Model P3112: 1 psi (0,1 bar)
Berat Fraksional OpsionalHingga 500 psi (35 bar): 0,1 psi (0,01 bar)
500 sampai 5000 psi (35 sampai 350 bar): 1 psi (0,1 bar)
5000 sampai 20.000 psi (350 sampai 1400 bar): 2 psi (0,2 bar)

Cairan Operasi

Cairan OperasiAir terdistilasi atau deionisasi

Opsi

Perangkat Lunak PressCalProgram berbasis Windows yang memungkinkan pengguna menerapkan semua koreksi dengan mudah untuk menyempurnakan kinerja penguji bobot mati. Detail kalibrasi kemudian disimpan dan/atau digunakan secara otomatis untuk membuat sertifikat kalibrasi. PressCal tersedia sebagai standar dengan semua perangkat 0,008%
CairanPerangkat dapat dilengkapi untuk penggunaan dengan cairan Skydrol or rem. Akibat sifat agresif dari cairan ini segel nitril standar dan tabung penampung akrilik akan diganti dengan segel Viton atau EPDM (bila memungkinkan) dan tabung penampung aluminium. Untuk penggunaan cairan ini atau cairan khusus lainnya, harap berkonsultasi dengan pihak pabri.

Model: Fluke Calibration P3200 Hydraulic Deadweight Tester

Fluke P3214-1
Fluke Calibration P3214-1 Hydraulic Deadweight Tester
Pressure Range 20 to 700 bar
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3211-1
Fluke Calibration P3211-1 Hydraulic Deadweight Tester
Pressure Range 1 to 35 bar
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3211-3
Fluke Calibration P3211-3 Hydraulic Deadweight Tester
Pressure Range 10 to 500 psi
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3211-2
Fluke Calibration P3211-2 Hydraulic Deadweight Tester
Pressure Range 1 to 35 kgf/cm²
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3211-4
Fluke Calibration P3211-4 Hydraulic Deadweight Tester
Pressure Range 100 to 3,500 kPa
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3211-5
Fluke Calibration P3211-5 Hydraulic Deadweight Tester
Pressure Range 0.1 to 3.5 MPa
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3213-1
Fluke Calibration P3213-1 Hydraulic Deadweight Tester
Pressure Range 10 to 350 bar
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3213-2
Fluke Calibration P3213-2 Hydraulic Deadweight Tester
Pressure Range 10 to 350 kgf/cm²
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3213-3
Fluke Calibration P3213-3 Hydraulic Deadweight Tester
Pressure Range 100 to 5,000 psi
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3213-4
Fluke Calibration P3213-4 Hydraulic Deadweight Tester
Pressure Range 1,000 to 35,000 kPa
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3213-5
Fluke Calibration P3213-5 Hydraulic Deadweight Tester
Pressure Range 1 to 35 MPa
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3214-2
Fluke Calibration P3214-2 Hydraulic Deadweight Tester
Pressure Range 20 to 700 kgf/cm²
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3214-3
Fluke Calibration P3214-3 Hydraulic Deadweight Tester
Pressure Range 200 to 10,000 psi
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3214-4
Fluke Calibration P3214-4 Hydraulic Deadweight Tester
Pressure Range 2,000 to 70,000 kPa
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3214-5
Fluke Calibration P3214-5 Hydraulic Deadweight Tester
Pressure Range 2 to 70 MPa
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3223-1
Fluke Calibration P3223-1 Hydraulic Deadweight Tester
Pressure Range 1 to 350 bar
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU
Fluke P3223-2
Fluke Calibration P3223-2 Hydraulic Deadweight Tester
Pressure Range 1 to 350 kgf/cm²
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU
Fluke P3223-3
Fluke Calibration P3223-3 Hydraulic Deadweight Tester
Pressure Range 10 to 5,000 psi
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU
Fluke P3223-4
Fluke Calibration P3223-4 Hydraulic Deadweight Tester
Pressure Range 100 to 35,000 kPa
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU
Fluke P3223-5
Fluke Calibration P3223-5 Hydraulic Deadweight Tester
Pressure Range 0.1 to 35 MPa
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU
Fluke P3224-1
Fluke Calibration P3224-1 Hydraulic Deadweight Tester
Pressure Range 1 to 700 bar
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU
Fluke P3224-2
Fluke Calibration P3224-2 Hydraulic Deadweight Tester
Pressure Range 1 to 700 kgf/cm²
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU
Fluke P3224-3
Fluke Calibration P3224-3 Hydraulic Deadweight Tester
Pressure Range 10 to 10,000 psi
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU
Fluke P3224-4
Fluke Calibration P3224-4 Hydraulic Deadweight Tester
Pressure Range 100 to 70,000 kPa
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU
Fluke P3224-5
Fluke Calibration P3224-5 Hydraulic Deadweight Tester
Pressure Range 0.1 to 70 MPa
Belilah

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU

Sumber: Fluke Calibration P3200 Hydraulic Deadweight Tester