Alat pengukuran kalibrator suhu dan suhu presisi Fluke

Carrying Case, 9142-4 Field Metrology Wells

The Fluke AC288 Terminal Block Probe features a retractable probe tip that provides safe and secure connections to clamp and screw type terminal blocks.

The Fluke 700PMP is a hand-operated pressure pump to provide pressures up to 150 psi/1000 kPa. Output fitting is 1/8 FNPT.

The Fluke 700HTH-1 hydraulic test hose is a 10,000 psi, 690 bar working pressure test hose that features stainless steel and nylon construction for use in connecting a Fluke-700HTP-1 or other hydraulic test pump to a unit under test.

The Fluke 700HTP-2 is a hand operated hydraulic pressure pump designed to generate calibration pressures up to 10,000 psi/690 bar. Designed for use with Fluke-700 series high pressure modules such as the Fluke-700P09, 700P29, 700P30 and 700P31.

The Fluke 700ILF can be used to isolate the calibrator from the incidental contract with fluids.

The Fluke 700LTP-1 is a hand operated pressure pump designed to generate either vacuum to -13 psi / -.90 bar or pressures to 100 psi / 6.9 bar. The Fluke 700LTP-1 has two pressure ports with quick fit connectors. Test hoses are terminated with 1/4-NPT female fittings that can be adapted using the BSP/ISO adapters.

700P01Ex Differential Pressure Module

700P05Ex Gauge Pressure Module

700P06Ex Gauge Pressure Module

700P09Ex Gauge Pressure Module

Display pressure readings in any of 10 different pressure units you specify in the calibrator setup

Display pressure readings in any of 10 different pressure units you specify in the calibrator setup

Display pressure readings in any of 10 different pressure units you specify in the calibrator setup

Display pressure readings in any of 10 different pressure units you specify in the calibrator setup.

The Fluke-700PTP-1 pneumatic test pump is capable of supplying pressures up to 600 psi, 40 bar.

Whether you schedule 200 or 2,000+ calibrations per year, Fluke's DPCTrack2 calibration management software will save you time and assure data integrity by tapping into your Fluke 740 or the new 750 series calibrator's documenting features.

Isothermal screw terminal for J wire, suitable for up to 20 gauge thermocouple wire.

Isothermal screw terminal for K wire, suitable for up to 20 gauge thermocouple wire.

Type-K thermocouple for general purpose applications, measurement range: -40 to 260 °C.

80PK-10 Pipe Clamp Temperature Probe

Designed for hands free measurement of HVAC temperature measuring applications, use multiple and leave in place for route based routine maintenance.

80PK-22 SureGrip Immersion Temperature Probe

Type-K thermocouple for use in air and non-caustic gas measurements, bead protected by perforated baffle.

Type-K thermocouple suitable for food industry, liquids and gels, measurement range : -40 to 260 °C.

Type-K thermocouple with tapered tip for use in air, non-caustic gas and surface applications, measurement range: -40 to 816ºC.

Type-K thermocouple for surfaces in rugged environment, durable ribbon sensor, measurement range: -127 to 600°C.

Type-K thermocouple for flat or curved surfaces such as plates and rollers, measurement range: 0 to 260 °C.

The Fluke 80PK-8 Pipe Clamp Temperature Probe uses Type-K thermocouple for fast temperature and superheat measurements of pipe surfaces. Buy Online Now.

80PK-9 General Purpose Probe

Operates with T-type thermometers, measurement range : -196 to 350 °C.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

SureGrip™ accessories are designed to improve steadiness in slippery hands.

One pair (red, black) of flat, right angle design for connecting to bus bars.

Single probe pierces 0.25 to 1.5 mm insulated wire.

BC7217 Battery Charger

BC7240 Battery charger/Eliminator for 75x

7.5 V DC battery eliminator for operation of calibrator from 120 volt AC line. UL/CSA recognized.

BP7235 NiMH Battery Pack

BP7240 Li-Ion battery pack for 75x

Hard carrying case with custom-cut foam liner

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof.

Unbreakable, watertight, airtight, dustproof, chemical resistant and corrosion proof.

FlukeView Forms Software with cable

Heavy duty construction with mounting holes

Set of two (one red, one gray) Hook Clips, designed for use with STL 120 Shielded Test Leads, VPS40 and TL75 Test Leads. Accepts wires up to 2.5 mm. The contact material is made of reinforced nickel plated steel

HC200 Hook Clip set 2 red, 2 gray

Highly reliable, measures 1 A to 1000 A and provides accurate current reading without breaking the circuit. Buy Online Now.

Extend the current ranges of multimeters with a single range 200 A clamp-on AC Current Clamp with safety shrouded banana plugs. Buy Online Now.

Small sized AC current clamp Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools.

The i30 current clamp is based on Hall Effect technology for use in measurement of both DC and AC current.

Fluke i400 AC current clamps extend the use of digital multimeters. Get a single range 400 A AC clamp in a compact shape.

The Fluke i410 AC/DC Current Clamp expands the functionality of digital multimeters and measures up to 400 amps for both AC and DC current.

Designed for use with multimeters, recorders, and safety testers for accurate non-intrusive AC current measurements. Buy Online Now.

Keep your multimeter test leads from tangling with Fluke’s LeadWrap test lead wraps. Three 8-inch (20 cm) hook & loop fasteners per package

STL120-III Shielded Test Leads Set

Twist. Test. The Fluke TL175 TwistGuard™ Test Leads with adjustable length test tips. Test leads as tough as your meter.

Test lead set dengan probe uji digunakan dalam beberapa aplikasi listrik. Fitur SureGrip™ dirancang untuk digunakan dengan nyaman.

SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

TL222 SureGripTM Silicone Insulated Test Leads

Includes 3 test lead accessories in an all-in-one set. Ideal starter kit for electrical applications.

These insulated test leads provide the convenience and variety for test lead configurations by attaching clips, hooks and grabbers as needed.

DMM test leads (red, black) with safety shrouded, standard diameter banana plugs

Provides comfort grip probes with silicone insulated, right-angle test leads. Heat and cold resistant.

PVC insulated test leads with right-angle shrouded banana plugs. Recommended for general purpose measurements.

TL910 Electronic Test Probe Set

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-hooks.

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and mini-pincers.

1 pair (red, black) of test leads with multi-stacking 4 mm banana plugs and micro-hooks.

Handy all-in-one kit that includes 3 Test Lead Sets.

TLK-220 EUR SureGrip Industrial Test Lead Kit

Includes all the SureGrip™ leads and probes in a handy six-pocket, roll-up pouch, along with TL224 test leads.

Ideal for electronics test and design, this master set includes 11 items in a handy pouch.

Fluke test leads, alligator clips and test probes broaden the ability to take meter measurements in different environments. Buy Online Now.

Provides firm and secure contact.

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals.

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals.

Due sonde (una rossa, una nera).

Recommended for use with TL222 and TL224

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire.

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding due to design.

Better than a test probe alone – these two inch long rigid back probe pins easily pass between the weather pack seal and wire.

Set of push-on adapters for TL71 and TL75 test probes.

WC100 Color Localization Set

The Fluke 700PRV consists of two relief valves (1360 and 5450 psi) to be used with the 700HTP Hydraulic Test Pump.

700TC2 Thermocouple Plug Kit700TC2

Translucent accessory hoses allow the technician to easily identify if there is oil or other contaminants in the hose before they get into your calibrator.

Extending and repairing J-type thermocouple wires, kit includes 3 meters of thermocouple wire and 1 pair of male/female mini-connectors.

The 80PK-18 Pipe Clamp Temperature Probe kit combines the standard 80PK-8 pipe clamp with the larger sized 80PK-10 pipe clamp, to give you a full range of measurement sizes.

Extending and repairing T-type thermocouple wires, kit includes 3 meters of thermocouple wire and 1 pair of male/female mini-connectors.

Electricians know that when you are measuring electrical installations there often appears to be a voltage, even if you know the wires are non energized.

Ideal for testing electronic equipment and offers versatility with modular test probes, alligator clips, test clips and more.