Français

404 page not found

32 résultats trouvés qui contiennent les termes suivants : talk-to
  • Fluke T+Pro Electrical Tester

    3 live AC/DC voltage indication: light, sound, and vibration

    Produit
  • Fluke 743/744 Documenting Software - DPC/TRACK

    Manage your instruments and your calibration data with this easy-to-use instrumentation management database.

    Produit
  • 1502A, 1504 Tweener Thermometer Readouts

    1502A Tweener PRT Readout The Fluke 1502A Tweener (formerly Hart Scientific) features accuracy up to ±0.006 °C (the 1504 is even more accurate, up to ±0.002 °C). In addition, it reads 100-ohm, 25-ohm, and 10-ohm probes, has a resolution of 0.001 °C across its entire range, and is the smallest unit in its class. It also has an optional battery pack for completely portable operation. Each Tweener is programmable to match a probe’s constants for maximum linearity and accuracy. All probe constants...

    Produit
  • 1523, 1524 Reference Thermometers

    Make accurate, consistent measurements… anywhere You need accuracy for compliance, product yields, energy savings, and consistent results. The Fluke 1523 and Fluke 1524 use current reversal, a technique used in high-end instruments that eliminates thermal EMFs, for precision temperature measurements. Specifications are guaranteed from -10 ºC to 60 ºC ambient. Special precision resistors and a highly stable reference voltage source keep 1523/24 accuracy virtually insensitive to environmental temperature. Like...

    Produit
  • 1594A, 1595A Super-Thermometers

    Resistance ratio or absolute resistance measurements: the choice is yours When your goal is to achieve the highest measurement accuracy possible, you will mostly likely make a resistance ratio measurement (Rx/Rs). The measurement accuracy of the 1595A over typical thermometry ratios (0.25 to 4.0) is as good as or better than 0.2 ppm. And for ratios near unity (0.95 to 1.05), the resistance ratio accuracy of the 1595A is as good as 0.06 ppm. You get the linearity of a traditional resistance bridge...

    Produit
  • 1620A Digital Thermometer-Hygrometer

    Two types of sensors are available. The high-accuracy sensor (“H model) reads temperature to ± 0.125 °C over a calibrated range of 16 °C to 24 °C. Relative humidity readings are to ± 1.5 % RH from 20 % RH to 70 % RH. The standard-accuracy sensor (“S model) reads temperature to ± 0.25 °C over its calibrated range of 15 °C to 35 °C. Relative humidity readings are to ± 2 % RH from 20 % RH to 70 % RH. All Fluke 1620A (DewK) thermo-hygrometer sensors come with NVLAP accredited certificates...

    Produit
  • 2456 Piston Gauge Monitor

    Accounting for environmental factors when performing piston gauge calibrations is an important but labor intensive process.   The Model 2456 piston gauge monitor (PGM) and WinPrompt calibration software help automate this process. The Model 2456 enhances measurement precision and consistency of critical piston gauge parameters including piston gauge temperature, float position, sink rate, air density, vacuum and other variables. Temperature The Model 2456 uses precision four-wire platinum...

    Produit
  • 2465A Gas Piston Gauge

    The Fluke Model 2465 Gas Piston Gauge (formerly Ruska 2465) has a long history of serving national standards laboratories, commercial industry and government organizations as a primary pressure standard for over 40 years. Since its original introduction, enhancements have been made to increase performance and reduce operator workload. The Model 2465 provides the capability of generating pressures to within a total expanded uncertainty of 10 parts per million to 700 kPa (100 psi) and 26 parts per...

    Produit
  • 2468A - Pitot/Static Primary Standard

    The Model 2468 Pitot Static Primary Standard is specifically designed for calibrating today’s high performance flight line and Air Data Test Systems. With the new autofloat controller, operator intervention is reduced to simply applying the mass load indicated by WinPrompt® software. WinPrompt applies all required correction factors, real time, to insure attainment of the highest level of performance available in a gas piston gauge which is required to calibrate today’s RVSM compliant test sets....

    Produit
  • 2638A Hydra Series III Data Acquisition System/Digital Multimeter

    Accurate industrial thermocouple measurements The 2638A incorporates the Fluke patented Universal Input Connector to bring more accuracy to thermocouple measurements than most other instruments in its class. The Universal Input Connector supports 14 common thermocouple types. Temperature-focused menu selections make the 2638A especially suitable for temperature validation applications. If you need to “zero” a large number of thermocouples to a known reference temperature before starting a temperature...

    Produit
  • 2680 Series Data Acquisition Systems

    The Fluke 2680 Series offers the choice of networked data acquisition, stand-alone data logging, or a combination of both. Choose from two basic chassis models: 2680A Data Acquisition System chassis The Fluke 2680A Data Acquisition System is the choice for multi-channel applications requiring reliable Ethernet communications. It features a front-end style data acquisition system that communicates and distributes data anywhere you need it to go. The 10BaseT and 100BaseT communications interface makes...

    Produit
  • 2680A-904 Trend Link v10

    Trend Graph Trend Graph is capable of showing the trends in a vertical orientation scrolling up or down and in a horizontal orientation scrolling to the right or left. Legend can be placed at the top or bottom of Trend Graph, resized or turned off for more trend viewing. Scales are able to show on the live edge, historic edge, both edges or turned off. Time Display windows can be placed at the top or bottom of Trend Graph, or turned off. Trends are shown in the Trend Graph window with new...

    Produit
  • 2700G Series Reference Pressure Gauges

    The 2700G has an easy-to-use interface that allows you to configure the sampling rate, tare value, damping, and auto-off time interval as well as reset the min/max pressure. You can also view the remaining battery life. Select from 21 different standard engineering units, including bar, in H2O, kPa, MPa, and psi. In addition, the supervisor menu can be used to set one custom engineering unit. To ensure against incorrect measurements, each of the above functions can be locked from use through the...

    Produit
  • 4322 Automated Pressure Calibration System

    4322 Automated Pressure Calibration System Components 4322 Pressure Controller The 4322 Pressure Controller is the primary component of the 4322 Automated Pressure Calibration System and is itself a highly capable calibrator. Very wide range measurement and control capabilities and advanced features are packed into one transportable, easy-to-use package. Simple, accurate pressure measurements The 4322 Pressure Controller provides 0.1% of reading total one-year measurement uncertainty from low pressure...

    Produit
  • 5322A Electrical Safety Tester Calibrator

    Maximize workload coverage in a quarter of the time The Fluke Calibration 5322A Multifunction Electrical Tester Calibrator combines many functions into a single instrument, replacing discrete resistors, decade boxes and other custom solutions commonly used to calibrate electrical safety testers. It’s flexible and precise enough to calibrate a wide range of instrumentation, and fast enough to handle the job in a quarter of the time you spend on manual multi-product methods. Insulation resistance...

    Produit
  • 5502A Multi-Product Calibrator

    A full-functioned calibrator that covers a wide range of common workload The 5502A Multi-Product Calibrator replaces the 5500A and addresses common workload items like 3.5 and 4.5 digit digital multimeters and more. It comes with internal and external protection features that enable you to transport it easily and perform onsite or mobile calibration. The 5502A can also be fully automated with MET/CAL® Plus Calibration Management Software. It is the ideal calibrator for metrology professionals who...

    Produit
  • 5502E Multi-Product Calibrator

    The functions you need for wide workload coverage The 5502E has a wide range of outputs available from a single calibration source. These include dc and ac voltages up to 1020 V, dc and ac current up to 20.5 A directly or 1025 A (using the 5500A/COIL 50-turn current coil accessory) and variable resistances up to 1100 MΩ. Using the 52120A Transconductance amplifier, the 5502E's output current is extended from 20.5 to 120 A; and with the use of 25 and 50 turn coils, it can calibrate instruments requiring...

    Produit
  • 5610, 5611, 5611T, 5665 Temperature Probes, Reference Thermistor Probes

    These temperature probes are available in a variety of sheath materials appropriate for your specific application. In addition to our metal-sheathed temperature probes, we offer flexible PTFE encapsulated and silicone coated thermistors that have smaller tips and can measure those places where even a metal-sheathed thermistor can't reach. PTFE encapsulated thermistor The 5611T is an especially versatile PTFE coated thermistor probe. With a PTFE encapsulated tip that is just 3 mm (0.12...

    Produit
  • 5627A Precision Thermometer, RTD Temperature Probe

    One of the best features of this RTD sensor is that it conforms to the standard 385 curve, letting you use your DIN/IEC RTD meters fully. Why use a precision thermometer or RTD temperature probe that’s less accurate than your meter? The 5627A is manufactured using a coil suspension element design for increased shock and vibration resistance. It has a mineral-insulated sheath with a minimum bend radius of 19 mm (3/4-inch) for flexibility and durability. (Bend, if any, should be specified...

    Produit
  • 5730A High Performance Multifunction Calibrator

    The calibrator for those who demand the best  The 5730A is designed for calibration professionals who require the most accurate dc/lf signals available in a multifunction calibrator, as well as those who simply want the best calibrator available. Metrologists in national laboratories, the military, third party calibration laboratories, and corporate users with high-end workload will value the performance and reliability of the 5730A. All 5730A calibrators are traceable to international standards...

    Produit
  • Fluke 179 Digital Multimeter and EDA2 Accessories Kit

    Fluke 179 True RMS digital multimeter with industrial strength test lead probe kit in a compact lightweight soft case

    Produit
  • Fluke 1621 Kit - Basic Earth Ground Tester

    The Fluke 1621 Kit is an easy-to-use earth ground tester. For ground resistance testing, the 1621 Kit is the first line of defense in detecting reliable ground connections.

    Produit
  • Les bonnes pratiques de Motor Dan : comment garder les variateurs de fréquence et moteurs en fonctionnement

    Les variateurs de fréquence (VFD) deviennent de plus en plus populaires. Mis en place sur des ventilateurs et des pompes, ils permettent de réaliser des économies d'énergie et, sur les applications mécaniques, d'effectuer des réglages précis qui ne seraient pas possibles avec d'autres méthodes.

    Article
  • Comment éviter d´acheter des outils Fluke du marché gris

    Lorsque vous achetez un produit auprès d´un distributeur Fluke agréé ou directement auprès de Fluke, vous bénéficiez de la garantie du fabricant d´origine. Découvrez comment vous protéger des produits du marché gris et des outils Fluke contrefaits.

    Article
  • From screwdrivers to testers: Vibration analysis comes of age

    Most machines have rotating parts, and rotating parts vibrate. Measuring how and how much those parts vibrate can tell you a lot about the health of a machine.

    Article
  • Plant Engineering recognizes the Fluke Connect reliability platform

    Fluke® Condition Monitoring and the Fluke® 279 FC Thermal Multimeter are finalists in the Maintenance Tools and Equipment category of the Plant Engineering 2016 Product of the Year Awards. The awards honor new products that help professionals do their jobs smarter, safer, more efficiently, and more productively as chosen by the magazine's subscribers.

    Article
  • Troubleshooting commercial lighting loads

    This Application Outlines Basic Power Quality Measurements For Power Conumption, Power Factor, Total Harmonic Distortion, And Voltage Stability, As They All Affect Commercial Lighting Loads. Lighting is a major load for many large facilities. Evaluating these circuits is important for both energy conservation and power quality. Keep in mind that commercial lighting loads are wired single phase, with the loads connected from phase to neutral. Typically, the phase-to-phase voltage is 480 V, with the phase-to-neutral voltage at 277 V. Measurements must be taken at the lighting panel, on all phases, since power consumption and Power Factor could vary on each phase.

    Document
  • 4332767-How You Measure Energy Matters

    Customers talk about the need for accurate, safe and reliable tools when measuring energy efficiency in buildings.

    Vidéos
  • 6000968-1730-Overview-FR-1920x1080

    Profiling energy usage across your facility helps you identify opportunities for energy savings and provides you with the easy-to-understand data required for you to take the right action.

    Vidéos
  • Energy Measurement and the Bottom Line

    Customers talk about measuring energy usage to make informed decisions and how saving energy can positively affect the bottom line.

    Vidéos
  • How Measuring Energy Can Help You Save Money

    Customers talk about energy efficiency and how measurement is important in helping customers make decisions around energy usage. Conducting a commercial building energy audit can help them to save money.

    Vidéos
  • Fluke Thermal Imaging: The Value of Measuring Energy

    Customers talk about the value in measuring energy efficiency in buildings.

    Vidéos