Resultados de la búsqueda

Buscar solo por:
Found 100 results containing the words:<front>
  • 9 Reasons to Purchase a Fluke 5790B AC Measurement Standard

    In this article, electrical calibration expert Marty Kidd explains why someone needs this type of product. He also explains why owners of an old Fluke 5790A should consider moving up to a new 5790B.

    Artículo
  • Cómo calibrar su sensor de temperatura PT100 y otras sondas internamente

    Descubra 3 formas de calibrar una PT100 y un procedimiento básico de 5 pasos. Descubra también cómo realizar la calibración internamente, con sus ventajas y dificultades.

    Artículo
  • Fluke 6130B y 6003A: 5 razones para elegir el calibrador de calidad eléctrica 6130B

    Tras la retirada del 6003A, el calibrador de calidad eléctrica 6130B es el mejor sustituto posible. Wally Miller, experto en productos de Fluke Calibration, compara los dos instrumentos y explica por qué el 6130B le ofrece mucho más.

    Artículo
  • Yes, you can write that technical paper

    Writer’s block isn’t limited to metrologists, of course – it’s a universal problem that people in many professions face (even writers). Here are a few simple tips that can help you on your way to greater visibility and respect in your career.

    Artículo
  • 884X-512M | Memoria USB de 512 MB

    Se conecta en el puerto USB en el panel frontal del 8846A

    Productos
  • Replacing PACE 6000 with the 6270A Modular Pressure Controller/Calibrator

    See the benefits of upgrading the GE Druck PACE 6000 to the Fluke 6270A & learn steps for configuring and installing the 6270A. Get the details here.

    Artículo
  • Replacing PACE 5000 with the 6270A Modular Pressure Controller/Calibrator

    This application note summarizes some of the benefits of upgrading to the 6270A, as well as detailing the steps for configuring and installing the 6270A as a replacement to the PACE 5000.

    Artículo
  • Modularity in pressure calibration systems

    Read this free app note to learn the benefits of modular pressure calibration systems over monolithic & learn how to assess what modular system fits you best.

    Artículo
  • Making the Right Choice for Your Temperature Readout

    Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

    Artículo
  • What else is needed to complete the pressure calibration solution?

    See "Are pressure generation and control required?" and specific product specifications to determine what is needed. Most needed hardware can be found in the Pressure calibration accessories section.

    Artículo
  • 884X-SHORT |Cortocircuito con 4 cables

    Terminales tipo banana de 4 mm orientados para provocar cortocircuitos en fuentes de entrada para multímetros digitales y terminales sensores

    Productos
  • 55XXA/PORTKIT | Kit de transporte 5560A para calibraciones in situ

    Con este kit opcional, los calibradores multiproducto 5560A, 5550A y 5540A son excelentes para la calibración in situ o móvil. El kit cuenta con asas y protecciones resistentes,

    Productos
  • Caja de control MFC-CB

    Define y lee entre 0 y 5 V o entre 4 y 20 mA en dos (2) canales simultáneamente

    Productos
  • 7004N/7010N

    Cada sistema Nanoscan consiste en uno o varios módulos de referencia Zener sólida modelo 7000 que se conecta en el chasis de una unidad principal

    Productos
  • Infrared Thermometer Calibration - A Complete Guide

    With proper setup and planning, infrared thermometer calibrations can be accurate. The steps outlined below should be followed to perform accurate infrared thermometer calibrations. Much of the information presented here is contained in ASTM E2847, “Standard Practice for Calibration and Accuracy Verification of Wideband Infrared Thermometers.”Sources of uncertaintyThere are several sources of uncertainty which contribute greatly to an infrared thermometer calibration. These sources are summarized...

    Artículo
  • How to Calibrate a Pressure Gauge with the Fluke 8270A High-Pressure Controller Calibrator

    Hi, this is Jeff Grossman, Sales Engineer for Fluke Calibration’s pressure and mass flow calibration solutions, here to provide you with a demonstration of one of our three modular pressure controllers. I happen to have here the 8270A which has a maximum pressure of 6000 psi complemented by the 6270A maximum pressure of 3000 psi and the 8370A with maximum pressure of 15,000 psi. The nice thing is they share a lot of commonality which makes them easy to switch between and easy to use.Very small...

    Artículo
  • Monitor de referencia de flujo (RFM) molbox

    Los elementos de flujo de molbloc se conectan al molbox RFM con dos conexiones de presión y una línea de datos

    Productos
  • Controlador de alta presión de gas GPC1-16000/GPC1-10000

    Se conectará un suministro de presión externa igual a la presión de prueba deseada máxima, de hasta 70 MPa (10.000 psi) (GPC1-10000) o 110 MPa (16.000 psi) (GPC1-16000), al puerto de suministro del GPC1

    Productos
  • Multímetro de referencia 8508A

    El 8508A ofrece una resolución de 8,5 dígitos, una linealidad excepcional, un ruido y una estabilidad extraordinariamente bajos, lo que en conjunto produce posiblemente las mediciones más exactas de cualquier producto que se encuentre actualmente en el mercado.

    Productos
  • Horno de calibración de termopar 9112B

    Los hornos de calibración son una alternativa excelente a los baños de arena, especialmente para termopares, RTD y sondas de fibra óptica.

    Productos
  • Actualización 5700A/EP

    El 5700A/EP es un servicio de actualización que amplía tanto el rendimiento como la vida útil del calibrador multifuncional 5700A.

    Productos
  • Calibrador multiproducto 5522A

    El 5522A suministra tensión y corriente continuas, tensión y corriente alternas con diversas formas de onda y armónicos, dos salidas de tensión o tensión y corriente simultáneas para simular alimentación CC y CA con control de fase, resistencia, capacitancia, termopares y RTD..

    Productos
  • Calibradores multiproducto de alto rendimiento 5520A

    El 5520A no se limita al entorno controlado del laboratorio de calibración. Está diseñado para llevarlo allá donde esté el trabajo

    Productos
  • 525B Calibrador de temperatura/presión

    El calibrador de temperatura/presión 525B es un dispositivo muy potente que combina gran exactitud y amplias funcionalidades en la calibración de instrumentos de presión.

    Productos
  • 525A Temperature/Pressure Calibrator

    The Fluke 525A temperature / pressure calibrator has been replaced by the 525B. By clicking, you’ll go to the old 525A page that has a link to the new 525B.

    Productos
  • Sistema de calibración universal 9100

    Hasta la fecha, nunca se habían asociado unos niveles tan elevados de simplicidad y versatilidad con un paquete de calibración tan completo como el que ofrece el modelo 9100.

    Productos
  • 752A Divisor de referencia

    El divisor de referencia 752A ajusta el estándar para precisar las relaciones y facilitar el uso. Ofrece dos salidas de divisor, 10:1 y 100:1 con incertidumbres de salida de menos de 0,2 ppm y 0,5 ppm respectivamente.

    Productos
  • Multímetro de referencia 8588A

    El multímetro de referencia 8588A, diseñado para laboratorios de calibración, es el multímetro de alta precisión más estable del mundo. Consulte las especificaciones y obtenga más información aquí.

    Productos
  • Terminal de flujo molbox1+

    Las innovaciones de molbox1+ permiten que el sistema molbloc/molbox1+ obtenga las incertidumbres de medida de caudal de gas más bajas de la industria.

    Productos
  • Generador/controlador de presión hidráulica OPG1

    OPG1-30000 ofrece una alternativa para generar y ajustar altas presiones líquidas en sistemas de calibración y pruebas.

    Productos
  • Multímetro de 8,5 dígitos 8558A

    El multímetro de 8,5 dígitos 8558A digitaliza 5 megamuestras por segundo a alta velocidad para automatización de sistemas en laboratorios y pruebas de fabricación.

    Productos
  • 4322 Automated Pressure Calibration System

    The 4322 Automated Pressure Calibration System calibrates almost any pressure gauge, transducer, transmitter or switch—including vacuum, compound, absolute & high-pressure devices.

    Productos
  • 5790A Patrón de medición de CA

    La variedad de conexiones de entrada le permite escoger la que mejor se adapte a la aplicación. En el 5790A existen cuatro grupos de terminales de entrada, dos conectores de tipo N y dos grupos de bornes de conexión de cinco vías

    Productos
  • Calibradores multifunción 5700A/5720A

    El 5700A y el 5720A son calibradores multifunción de cinco funciones diseñados para satisfacer las cargas de trabajo de calibración eléctrica más exigentes.

    Productos
  • Release: MET/TEAM version 3.0.0 (with MET/CAL version 10.2.0)

    Release: MET/TEAM version 3.0.0 (with MET/CAL version 10.2.0) (.iso)Documents:MET/TEAM version 3.0.0 (with MET/CAL version 10.2.0) (.pdf)MET/TEAM 3.0.0 ReadMe (.pdf)MET/CAL 10.2.0 ReadMe (.pdf)MET/TEAM Installation Guide (Updated for version 3.0) (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.0.0 and MET/CAL version 10.2.0 release is a a major update to MET/TEAM and MET/CAL software. This update includes new features, improvements, bug fixes, and minor...

    Artículo
  • MET/TEAM® v3.3.0 and MET/CAL® v11.0.0 Software Trial

    Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)Documents:MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)MET/TEAM 3.1.1 Readme (.pdf)Update Instructions for MET/TEAM 3.1.1 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You...

    Artículo
  • COMPASS for Pressure Calibration Software Download/Upgrade

    COMPASS for Pressure Basic (.exe)Additional Downloads:COMPASS for Pressure Basic, Demo (.exe)COMPASS for Pressure Basic, Upgrade (.exe)COMPASS for Pressure Enhanced (.exe)COMPASS for Pressure Enhanced, Demo (.exe)COMPASS for Pressure Enhanced, Upgrade (.exe)TITLEVERUSE WITHDOCUMENTSCOMPASS®for Pressure™5.2.102024.05.21FPG8601, PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCH, PPCK, PPCK+, RPM3, RPM4, 7050, 7052, 7250, 7252, 7350, 7615, 7750, 7010, 7215, 2465, 2456, 2271A, 6270A, 8270A, 8370A,Third...

    Artículo
  • Update: MET/CONNECT version 1.3.0 (with MET/CAL version 10.2.3)

    Update: MET/CONNECT version 1.3.0 (with MET/CAL version 10.2.3) (.zip)Documents:MET/CONNECT 1.3.0 Installation Guide (.pdf)MET/CONNECT 1.3.0 Readme (.pdf)MET/CAL 10.2.3 Readme (.pdf)Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 1.3.0 and MET/CAL version 10.2.3 release is an update to previous MET/CONNECT and MET/CAL software. This update includes bug fixes and minor updates.You must be running MET/CONNECT version 1.2.0 before upgrading to version 1.3.0.This...

    Artículo
  • Update: MET/CONNECT version 1.2.0 (with MET/CAL version 10.2.2)

    Update: MET/CONNECT version 1.2.0 (with MET/CAL version 10.2.2) (.zip)Documents:MET/CAL 10.2.2 readme (.pdf)MET/CONNECT 1.2.0 readme (.pdf)MET/CONNECT 1.2.0 Installation Guide (.pdf)Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 1.2.0 and MET/CAL version 10.2.2 release is an update to previous MET/CONNECT and MET/CAL software. This update includes bug fixes and minor updates.You must be running MET/CONNECT version 1.1.0 before upgrading to version 1.2.0.This...

    Artículo
  • Estándares de alimentación eléctrica 6105A/6100B

    Con el 6105A y el 6100B se obtienen las señales necesarias para que los procesos descritos anteriormente se puedan llevar a cabo con eficacia, rapidez y mediante operarios menos calificados.

    Productos
  • Update: MET/CAL version 10.2.2 for MET/TEAM version 3.0.0

    Update: MET/CAL version 10.2.2 for MET/TEAM version 3.0.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available with the MET/CONNECT 1.2.0 installer.Current MET/TEAM Customers:MET/CAL version 10.2.2 release is an update to previous MET/CAL software. This update includes bug fixes and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you...

    Artículo
  • RPM4-AD v1.00f Embedded Software

    RPM4-AD v1.00f Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4-AD™1.00f2010.12.28RPM4-ADDo NOT use with NON "-AD" (Air Data)RPM4 ModelsInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an...

    Artículo
  • RPM4 v1.01I Embedded Software

    RPM4 v1.01I Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4™1.01I2019.04.28RPM4Note: If you have a special RPM4model use these links:RPM4-AD™RPM4-AF™RPM4-E-DWT A70M/A7M-AF™RPM4-E-DWT™Please contact our Calibration and Repair department at 602.773.4782 if you recently upgraded to version 1.01f or plan to upgrade from 1.01f to another version. The upgrade path from 1.01f may cause a potentially significant metrological error.Instructions:Download the file.Run Winflash and select...

    Artículo
  • Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0)

    Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from either version 3.0.0 or 3.1.0 directly to version 3.1.1.Upgrading from version 3.0.0 or 3.1.0 of MET/TEAM will not require you to re-request your...

    Artículo
  • Release: MET/TEAM version 3.1.0 (with MET/CAL version 10.5.0)

    Release: MET/TEAM version 3.1.0 (with MET/CAL version 10.5.0) (.iso)Documents:MET/TEAM 3.1.0 Readme (.pdf)MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)Update Instructions for MET/TEAM 3.1.0 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.0 and MET/CAL version 10.5.0 release is a a major update to MET/TEAM and...

    Artículo
  • PPCH-G v1.02k Embedded Software

    PPCH-G v1.02k Embedded Software (.bin)TITLEVERUSE WITHPPCH-G™1.02k2023.11.08PPCH-GInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded...

    Artículo
  • PPCH-G v1.02f Embedded Software

    PPCH-G v1.02f Embedded Software (.bin)TITLEVERUSE WITHPPCH-G™1.02f2012.04.04PPCH-GInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded...

    Artículo
  • PPCH 1.01n Embedded Software

    PPCH 1.01n Embedded Software (.bin)TITLEVERUSE WITHPPCH™1.01n2013.07.22PPCHInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded software.The...

    Artículo
  • PPC4E v1.2.6.15 Embedded Software

    PPC4E v1.2.6.15 Embedded Software (.bin)TITLEVERUSE WITHPPC4E™1.2.6.15PPC4EInstructions:Download the file by clicking on "PPC4E v1.2.6.15.bin".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it...

    Artículo
  • PPC4 v1.2.6.14 Embedded Software

    PPC4 v1.2.6.14 Embedded Software (.bin)TITLEVERUSE WITHPPC4™1.2.6.14PPC4 (including -AF models)Instructions:Download the file by clicking on "PPC4 v1.2.6.14.bin".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

    Artículo
  • PPC3 v1.03d Embedded Software

    PPC2-AF v1.01e Embedded Software (.bin)TITLEVERUSE WITHPPC3™1.03d2011.10.21PPC3 (including -AF models)Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should only be performed after...

    Artículo
  • Hornos de punto de congelación 9114, 9115A, 9116A

    9114, 9115A, 9116A Freeze-point furnaces from Fluke Calibration are very stable & can be used to maintain metal fixed-points for hours to calibrate your SPRT.

    Productos
  • 910/910R Estándares de frecuencia controlada por GPS

    La señal de GPS recibida se mide de forma continua en función del oscilador local. La desviación de fase y frecuencia se almacena internamente y puede transferirse en cualquier momento directamente a un PC desde el dispositivo 910/910R o en casi cualquier ubicación mediante la interfaz Ethernet opcional

    Productos
  • Controladores/calibradores modulares de alta presión 8270A y 8370A

    El 8270A y el 8370A son controladores de presión neumática automatizados que calibran una mayor carga de trabajo de los sensores de presión, lo cual cubre dos veces los rangos de presión a dos veces la velocidad de otros controladores de alta presión.

    Productos
  • Calibrador de procesos de precisión 7526A

    El calibrador de procesos de precisión 7526A de Fluke Calibration ofrece el mejor equilibrio de economía y exactitud para la calibración de banco de instrumentos para procesos de presión y temperatura.

    Productos
  • Divisor Kelvin-Varley 720A

    Un divisor Kelvin-Varley modelo 720A es un estándar de relación principal con linealidad absoluta de 0,1 ppm, coeficiente de temperatura de linealidad de 0,1 ppm/ºC y capacidad de calibración automática.

    Productos
  • Calibrador de comprobadores de seguridad eléctrica 5322A

    El calibrador de comprobadores eléctricos 5322A ayuda a los técnicos de calibración a cumplir las nuevas normas hasta cuatro veces más rápido que con los métodos tradicionales.

    Productos
  • Estándar de medición de CA 5790B

    El estándar de medición de CA del 5790B es una medición de CA con fines múltiples y estándar de transferencia diseñada para la mayoría de las aplicaciones de calibración más demandantes.

    Productos
  • PG7000 Ver 2.07h Embedded Software

    PG7000 Ver 2.07h Embedded Software (.bin)TITLEVERUSE WITHPG7000™2.07hAll PG7000 Series modelsInstructions:-Ver 2.02x and 2.03x Users You can upgrade directly to this version with no special considerations.-Ver 2.01x UsersVer 2.02 is a major revision which should be accompanied by hardware changes.-Ver 1.0x UsersVer 2.01 is a major revision which should be accompanied by hardware changes. Contact a Fluke Calibration Authorized Service Center for additional information.Download the file. Run Winflash and...

    Artículo
  • Miniaparato de mantenimiento de punto triple de agua 9210

    El punto triple del agua (0,01 °C) es una de las temperaturas más importantes del ITS-90

    Productos
  • molbox1+ or molbox1+S v6.01 Embedded Software

    molbox1+ or molbox1+S v6.01 Embedded Software (.bin)TITLEVERUSE WITHmolbox1+/molbox1+S™6.012016.12.16molbox1+/molbox1+STITLEVERUSE WITHmolbox1+/molbox1+S™6.012016.12.16molbox1+/molbox1+SThis flash is intended ONLY for molbox1+ or molbox1+S with the Fluke Calibration logo: on the front panel, serial number 2000 and above. Attempted use on any other molbox will result in an inoperable molbox unless the molbox1 hardware is upgraded to a molbox1+.For a molbox1 WITHOUT the Fluke Calibration logo,...

    Artículo
  • molbox1 v5.41 Embedded Software

    molbox1 v5.41 Embedded Software (.bin)TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

    Artículo
  • COMPASS® for Pressure Version 4 Release Notes

    Download COMPASS® for PressureVersion 4 Releases4.2 (2012.07.27)ADDCP-115%4COMPASS for Pressure now supports the calibration functions of CalTool for RPTs. This functionality allows users to fully adjust and report calibration results for supported Fluke products. Sample tests are included with COMPASS that support automated collection of as received data and as left data with an adjustment in between. Review the CalTool for RPTs application note for details. The COMPASS CalTool implementation supports...

    Artículo
  • COMPASS® for Pressure Version 3 Release Notes

    Download COMPASS® for PressureVersion 3 Releases3.00.43 (SP1) (2011.02.11)ADDCP-802Support PG7000 and PG9000 models that respond with FLUKE as the manufacturer.CHGCP-793An automated PG7000/PG9000 system with a PPC and AMH will use ATM as the minimum pressure when exercising in a test that is run in Absolute by ATM.3.00.42 (SP1) (2010.07.07)ADDCP-689Support alternate units of measure and temperature references for the Piston Cylinder effective area.ADDCP-775Added new instruments to the default database.CHGCP-786When...

    Artículo
  • COMPASS for molbox PC Based Software Download/Upgrade

    COMPASS for molbox PC Based Software Demo (.exe)COMPASS for molbox PC Based Software Upgrade (.exe)TITLEVERUSE WITHCOMPASS®for molbox™4.062010.10.28TITLEVERUSE WITHCOMPASS®for molbox™4.062010.10.28molbox1, molbox1+, molbox RFMDescriptionThis download file provides 100 hours of fully functioning use of COMPASS for molbox. Licensed users can download this file to upgrade from a previous version of COMPASS for molbox.  SummaryCOMPASS for molbox is a complete flow calibration software package...

    Artículo
  • COMPASS for Flow PC Based Software Download/Upgrade

    COMPASS for Flow PC Based Software (.exe)Additional Downloads:COMPASS for Flow, PC Based Software, Demo (.exe)COMPASS for Flow, PC Based Software, Upgrade (.exe)Patch to use COMPASS for Flow 4.0 with MET/TRACK 7.3 SP1 (.zip)Patch to use COMPASS for Flow 4.0 with MET/TRACK 8.X (.zip)TITLEVERUSE WITHDOCUMENTSCOMPASS®for Flow™5.1.0molbox1, molbox1+, molbox1+S, molbox RFM, MFC-CB, MFC SwitchboxCOMPASS for Flow uses an on line HTML help system that is installed with the program. Install and run COMPASS...

    Artículo
  • CalTool for RPTs Free Utility

    CalTool for RPTs Free Utility (57.61 MB)TITLEVERUSE WITHDOCUMENTSCalTool™ for RPTs Free Utility1.10.0.252021.05.11PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCK, PPCK+, RPM1, RPM3, RPM4, PPCH, PPCH-G, molbox1, molbox RFMCalTool for RPTs uses an on line HTML help system that is installed with the program. Install and run CalTool then select the [Help] menu to access the help system.(Note: As a result of PC specific security settings the help may not display correctly when viewed over the Internet....

    Artículo
  • 9640A Firmware Upgrade

    9640A-LPNX Firmware Upgrade (.exe)Additional Downloads:9640A-LPN Firmware Upgrade (.exe)9640A Firmware Upgrade (.exe)Documents:96xxx Firmware Release Notes v 3.21 (.doc)9640A RF Reference Source Firmware Upgrade9640A RF Reference Source Firmware UpgradeThere are three different firmware updates available for the 9640A product range. Instruments can only be updated with firmware at the same major firmware version. That is instruments with 1.xx can only have another version of 1.xx installed on it,...

    Artículo
  • 8588A & 8558A Firmware, Update by USB

    8588A & 8558A Firmware, Update by USB (.zip)TITLEUSE WITH8588A & 8558AAllThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by USBFluke 85xx update v1.32To update a Fluke 8588A/8558AAn empty USB stick (of greater than 10Mbytes) will be required. This should be formatted using...

    Artículo
  • 4322 v1.4.3.27 Embedded Software

    4322 v1.4.3.27 Embedded Software (.bin)TITLEVERUSE WITH4322v1.4.3.272015.12.014322TITLEVERUSE WITH4322v1.4.3.272015.12.014322Instructions:Download the file by clicking on "4322 v1.4.3.27 Embedded Software".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a standard RS232 cable to the COM1 port of the 4322.The updating of embedded software should only be performed after...

    Artículo
  • Visor de aumento 2069

    El uso de un visor de aumento para calibrar termómetros líquidos puede reducir la incertidumbre al ampliar la escala del termómetro y proporcionar una mejor resolución de visualización.

    Productos
  • Indicador de temperatura Black Stack 1560

    El dispositivo Black Stack 1560 puede convertirse en el tipo de termómetro que desee, ya que presenta tres modos de funcionamiento distintos.

    Productos
  • Termómetro de estándares 1529 Chub-E4

    El Chub-E4 cuenta con cuatro entradas para leer cuatro sensores distintos de forma simultánea, además, le configuraremos aquellas entradas de cualquiera de las tres diferentes maneras según lo prefiera.

    Productos
  • Calibrador multifunción de alto rendimiento 5730A

    El calibrador multifunción de alto rendimiento 5730A de Fluke Calibration es la culminación de años de desarrollo de ingeniería, investigación acerca de los clientes y diseño industrial para llevar al marcado el nuevo “patrón oro” en la calibración multifunción eléctrica.

    Productos
  • 5725A Amplifier

    The 5725A Amplifier enhances the 5700A and 5720A Multifunction Calibrators in the ac voltage, ac current, and dc current functions.

    Productos
  • Improving triple point of water cell accuracy

    The triple point of water (TPW) is the only thermometric fixed point used in definitions of both the thermodynamic temperature and the international temperature scale. It is undoubtedly the most important fixed point in thermometry. Some results from the international comparison of TPW cells undertaken a few years ago found differences among TPW cells as large as 0.1 mK or more. This is why we started working to improve the quality of our TPW cells about four years ago.As we know, impurities in the...

    Artículo
  • La lucha contra los productos eléctricos falsos

    En julio de 2010, el Servicio de Aduanas y Protección Fronteriza de los Estados Unidos (CBP) del puerto de Savannah, Georgia, se incautó de 1988 lámparas de escritorio porque estaban marcadas con logotipos falsos de Underwriter Laboratories (UL).

    Artículo
  • Registrador trifásico básico de calidad eléctrica Fluke 1750/B

    Registre la calidad eléctrica en sistemas trifásicos para detectar la existencia de perturbaciones de calidad eléctrica con el nuevo registrador de calidad eléctrica 1750 de Fluke y el software Fluke Power Analyze.

    Productos
  • Registrador trifásico de calidad eléctrica Fluke 1750-TF

    Registre la calidad eléctrica en sistemas trifásicos para detectar la existencia de perturbaciones de calidad eléctrica con el nuevo registrador de calidad eléctrica 1750 de Fluke y el software Fluke Power Analyze.

    Productos
  • Indicadores de temperatura 1502A/1504 de Fluke Calibration

    Los termómetros de referencia 1502A y 1504 darán lectura a los RTD, PRD y los sensores del termistor.

    Productos
  • Escáner de temperatura de precisión Super-DAQ 1586A

    El sistema de adquisición de datos de temperatura más preciso y flexible del mercado.

    Productos
  • Cámara infrarroja Fluke Ti450

    La cámara termográfica Fluke Ti450 con enfoque MultiSharp™ proporciona una imagen enfocada de los objetos próximos y lejanos. Deje de preocuparse por el enfoque; basta con que apunte y dispare.

    Productos
  • Kit combinado de multímetro para automoción Fluke 88V/A

    El kit combinado de multímetro para automoción Fluke 88V ha mejorado las funciones de medida y de resolución de problemas en vehículos convencionales e híbridos.

    Productos
  • Pozo seco de campo Fluke Calibration 9103/9140

    Si alguna vez ha empleado los calibradores de pozo seco para trabajos sobre el terreno, sabrá que no solo hay que tener en cuenta el rango de temperatura y la estabilidad. El tamaño, peso, velocidad, comodidad y el software también son importantes.

    Productos
  • El proceso de generación de energía desde la planta hasta su distribución

    Si trabaja generando energía, afronta desafíos como la prevención de los tiempos de inactividad e índices de fuga, la comprobación de sistemas de seguridad, la solución de la interrupción de procesos con una respuesta y reparación inmediatas, así como el aumento del rendimiento. Los multímetros digitales, las herramientas de vibración y los termógrafos son herramientas que pueden ayudarle.

    Artículo
  • El nuevo medidor de vibraciones Fluke 805 FC es la última incorporación de Fluke Connect, el sistema inalámbrico de instrumentos de comprobación y medición más grande del mundo

    Fluke Corp. introduces the Fluke® 805 FC Vibration Meter, a portable multifunction vibration screening tool that provides quantifiable information on the bearing and overall health of motors and other rotating equipment, and shares that data in real time via Fluke Connect®. The Fluke 805 FC is ideal for frontline mechanical troubleshooting teams that need reliable and repeatable measurements of rotating equipment to make imperative go/no-go maintenance decisions.

    Artículo
  • medidas de multímetro en variadores de velocidad ajustables mediante el nuevo DMM Fluke 87 V

    En el pasado, las reparaciones de motores suponían trabajar con las averías típicas del motor trifásico, que en buena medida eran provocadas por el agua, el polvo, la grasa, problemas con los rodamientos, ejes mal alineados o simplemente la antigüedad. Pero esto ha cambiado enormemente con la introducción de motores con control electrónico, más conocidos como variadores de velocidad (ASD, por sus siglas en inglés).

    Artículo
  • ¿Alguna vez se ha preguntado cuál es la eficiencia de su chimenea?

    Marca de calor del día siguiente de la instalación existente de una parrilla plana.

    Artículo
  • Instrumentos resistentes para entornos adversos

    Greg Burdick prueba el interruptor de velocidad de una cinta transportadora.

    Artículo
  • Análisis del consumo y aclimatación con cámaras termográficas

    El primer paso para evaluar el uso de la energía en un edificio exige analizar su consumo. Este análisis consiste en llevar a cabo varias comprobaciones del rendimiento de la vivienda con el fin de identificar oportunidades para reducir el consumo. Una vez completado el análisis, se aplican varias técnicas de aclimatación con el fin de mejorar la eficiencia energética del edificio a las que se suele hacer referencia con el nombre de "aclimatación".

    Artículo
  • Una mirada renovada a los conceptos de la calidad eléctrica

    Si la calidad de la electricidad que consume su planta no es la que debería ser, esto le costará a su empresa más de lo que debería. Una mala calidad eléctrica reduce la vida de su equipo, dispara su equipo automatizado y produce un calor extremo que debe eliminarse.

    Artículo
  • ¿Se sobrecalienta el panel eléctrico sin ninguna razón aparente?

    Un electricista tenía un cliente con un problema muy habitual: uno de los paneles eléctricos se sobrecalentaba. Lo que, de algún modo, hacía que la situación fuese inusual era el hecho de que el sobrecalentamiento no fuese el resultado de ninguna de las causas habituales.

    Artículo
  • ¿Cuál es la relación entre el ancho de banda del osciloscopio y el tiempo de subida de la forma de onda?

    Esta es la primera pregunta que me asaltó mientras leía el comunicado de prensa del nuevo instrumento de comprobación Fluke ScopeMeter® 190-502, con un ancho de banda de 500 MHz.

    Artículo
  • Detectar monóxido de carbono

    Las emisiones procedentes de vehículos en garajes y muelles de carga son una fuente habitual de monóxido de carbono.

    Artículo
  • ¡Ponga a punto ya su sistema de refrigeración!

    Cuando hace calor fuera, es necesario asegurarse de que los sistemas de refrigeración mecánicos de su edificio funcionan con la máxima eficiencia. Dado que el presupuesto todavía es ajustado, nadie quiere afrontar ningún coste energético alto, y aún menos un fallo en el equipo.

    Artículo
  • Medida de la velocidad del aire con el dispositivo Fluke 975 AirMeter™: uso de la sonda de velocidad

    La velocidad del aire es un parámetro fundamental a la hora de evaluar el rendimiento de un sistema con flujo de aire. La mayoría de los técnicos de sistemas de climatización de hoy en día utilizan un anemómetro para medir la velocidad del aire en rejillas, ventilas y difusores, en un conducto o en espacios abiertos, como parte de una tarea básica de comprobación, ajuste y compensación de los sistemas de distribución de aire climatizado.

    Artículo
  • Aspectos básicos sobre los osciloscopios portátiles - Parte 5: Captura de eventos intermitentes y aleatorios con un osciloscopio portátil

    La última sección de este conjunto de artículos sobre el uso de osciloscopios portátiles abarca la "captura" de formas de onda que no se repiten ni son predecibles.

    Artículo
Chatee con nuestroasistente de Fluke
Borrar el chat