Español

404 page not found

Se han encontrado 44 resultados que contienen las palabras: about
  • 1560 Black Stack Thermometer Readout

    The 1560 Black Stack thermometer readout can be any kind of thermometer you want it to be, and it works in three distinctive ways. It’s a reference thermometer with an accredited calibration; it’s an automated calibration system reading your reference probe and sensors you’re testing; or it’s a high-accuracy data acquisition system. And it does each of these functions better than any other thermometer currently on the market. The Stack consists of up to eight different modules that fit together...

    Producto
  • 1594A, 1595A Super-Thermometers

    Resistance ratio or absolute resistance measurements: the choice is yours When your goal is to achieve the highest measurement accuracy possible, you will mostly likely make a resistance ratio measurement (Rx/Rs). The measurement accuracy of the 1595A over typical thermometry ratios (0.25 to 4.0) is as good as or better than 0.2 ppm. And for ratios near unity (0.95 to 1.05), the resistance ratio accuracy of the 1595A is as good as 0.06 ppm. You get the linearity of a traditional resistance bridge...

    Producto
  • 2271A Industrial Pressure Calibrator

    Wide workload coverage for the present and the future The 2271A features pressure ranges from -100 kPa to 20 MPa (-15 to 3000 psi), which covers the requirements of a wide range of gauges and sensors. Thanks to its modular design, the 2271A enables you to install two modules with different measurement ranges within the same chassis. You can purchase modules to match your current workload now; later, when your workload changes and grows, you can easily add ranges, swapping modules in and out according...

    Producto
  • 2680 Series Data Acquisition Systems

    The Fluke 2680 Series offers the choice of networked data acquisition, stand-alone data logging, or a combination of both. Choose from two basic chassis models: 2680A Data Acquisition System chassis The Fluke 2680A Data Acquisition System is the choice for multi-channel applications requiring reliable Ethernet communications. It features a front-end style data acquisition system that communicates and distributes data anywhere you need it to go. The 10BaseT and 100BaseT communications interface makes...

    Producto
  • 2680A-904 Trend Link v10

    Trend Graph Trend Graph is capable of showing the trends in a vertical orientation scrolling up or down and in a horizontal orientation scrolling to the right or left. Legend can be placed at the top or bottom of Trend Graph, resized or turned off for more trend viewing. Scales are able to show on the live edge, historic edge, both edges or turned off. Time Display windows can be placed at the top or bottom of Trend Graph, or turned off. Trends are shown in the Trend Graph window with new...

    Producto
  • 5128A RHapid-Cal® Humidity Generator

    Seven key features of the 5128A RHapid-Cal® Humidity Generator 1. Best-in-class system accuracy for dependable humidity probe calibration The 5128A RHapid-Cal® offers a best-in-class humidity system accuracy of ± 1.0 % RH (7 to 80% RH, 18 °C to 28 °C) which includes all known sources of error such as stability, uniformity, drift, and calibration uncertainty.  Calibrate with confidence using an instrument with comprehensive specifications.  Most competing generators don’t specify...

    Producto
  • 5502A Multi-Product Calibrator

    A full-functioned calibrator that covers a wide range of common workload The 5502A Multi-Product Calibrator replaces the 5500A and addresses common workload items like 3.5 and 4.5 digit digital multimeters and more. It comes with internal and external protection features that enable you to transport it easily and perform onsite or mobile calibration. The 5502A can also be fully automated with MET/CAL® Plus Calibration Management Software. It is the ideal calibrator for metrology professionals who...

    Producto
  • 5522A Multi-Product Calibrator

    Rugged carrying case enables safe transport and efficient onsite calibration An innovative carrying case accessory makes it easier than ever to calibrate outside of the calibration laboratory, as well as inside. The shock-mounted case features built-in handles and wheels, enabling you to move the calibrator from place to place easily and safely. The front and rear access doors are removable, so you can calibrate with the 5522A while its top, bottom and side panels remain protected – and avoid having...

    Producto
  • 5606 Full Immersion PRT

    The 5606 is just two inches (50 mm) in length with a sheath diameter of 1/8 inch (3.1 mm). Since it can be fully immersed over its entire temperature range, you don’t have to worry about calculating minimum immersion depth— immerse the entire probe, transition junction, and lead wires, in either non-corrosive liquids or dry mediums ranging from –200 °C to 160 °C. The 100 Ω precision sensing element (alpha = 0.00385) is specially constructed to prevent the ingress of moisture while achieving...

    Producto
  • 5640 Series Thermistor Standards Probes

    Each temperature thermistor probe uses an ultra-stable glass thermistor enclosed in a thin-wall stainless steel tube. The basic semiconductor element is a bead of manganese, nickel, and cobalt oxides mounted on 0.1 mm platinum wires. For long-term stability, the thermistor is aged at various temperatures for 16 weeks. During the aging process, verification of the probe’s stability is done to ensure performance to published specs. The 5640, 5641, and 5642 thermistor probes are designed for the temperature...

    Producto
  • 5730A High Performance Multifunction Calibrator

    The calibrator for those who demand the best  The 5730A is designed for calibration professionals who require the most accurate dc/lf signals available in a multifunction calibrator, as well as those who simply want the best calibrator available. Metrologists in national laboratories, the military, third party calibration laboratories, and corporate users with high-end workload will value the performance and reliability of the 5730A. All 5730A calibrators are traceable to international standards...

    Producto
  • 5901 Triple Point of Water Cells

    Heavy water Fluke Calibration cells contain carefully and repetitively distilled ocean water and are meticulously evacuated and sealed to maintain an isotopic composition nearly identical to the international standard, “Vienna Standard Mean Ocean Water," or “VSMOW." The oxygen atoms found in most water are predominantly comprised of eight protons and eight neutrons (16O). Some oxygen atoms, however, have an extra neutron (17O) or two (18O). Similarly, the hydrogen atoms in water normally contain...

    Producto
  • 6003A Three Phase Electrical Power Calibrator

    Accurate performance for the calibration laboratory Until now, many  engineers and technicians have been testing three-phase devices with a single-phase series-parallel technique, because the cost of available three-phase sources with acceptable accuracies has put true polyphase testing out of reach. With the 6003A, these professionals can now afford three-phase performance, accuracy, and ease of use. More importantly, they can now test multi-phase meters in conditions that reflect their actual...

    Producto
  • 6270A Pressure Controller / Calibrator

    Calibrate a wide workload—quickly, accurately, dependably The 6270A features pressure ranges from low differential pressure to 20 MPa (3000 psi), which covers the requirements of most gauges and sensors. Three levels of accuracy, 0.02 % FS, 0.01 % reading from 50% to 100 % or 0.01 % reading from 30 % to 100 %, let you balance your need for accuracy with the limits of your budget. Thanks to its modular design, the 6270A is flexible enough that you can install modules with different accuracy classes...

    Producto
  • 6331/7321/7341/7381 Deep-Well Compact Baths

    Need a bath with a lot of immersion depth, great stability, and a low price tag? How about one that minimizes fluid costs, changes temperatures quickly, and runs quietly? Fluke Calibration's new Deep-Well Compact Bath series features four models covering temperatures from –80 °C to 300 °C. Each model includes a 457 mm (18-inch) deep tank to accommodate long-stem PRTs, SPRTs, and liquid-in-glass (LIG) thermometers. Access openings are 120 by 172 mm (4.7 in by 6.8 in) so you can calibrate many...

    Producto
  • 6531, 6532 E-DWT Electronic Deadweight Tester Kits

    The E-DWT-H is used in the lab or instrument shop or can be taken into the field for performing in-situ calibrations and tests. This hydraulic pressure calibration system combines a high performance electronic reference pressure monitor and manually operated pressure generation and control hardware in a single, compact and rugged package. E-DWT-H offers the ease of use and precision of continuous, real time electronic pressure measurement with the simple and direct pressure control of high quality...

    Producto
  • 7008/ 7040/ 7037/ 7012/ 7011 Refrigerated Temperature Calibration Baths

    These five baths operate at temperatures as low as –40 °C, and each one is built using CFC-free refrigerants. Fluke Calibration’s proprietary controller design and unique tank construction produce bath stabilities to ±0.001 °C or better. These baths are so stable and uniform that national labs use them for comparison calibrations and fixed-point cell maintenance. Each bath (except the 7011) is fully automatable with a bath interface package and Fluke Calibration’s MET/TEMP II automation...

    Producto
  • 700HPPK Pneumatic Test Pump Kit

    Use the 700HPPK just about anywhere The 700HPPK is designed to be at home in the lab or the field. Lightweight and portable, it features collapsible feet, built-in handhold, and a canvas carrying case, making it easy to carry to the field. The 700HPPK works on just about any surface, so you don’t need a flat laboratory bench or flat area in the field. With the 700HPPK, you don’t need to carry a lot of extra equipment or accessories. No PTFE tape or extra tools are required thanks to a swivel...

    Producto
  • 7526A Precision Process Calibrator

    A “best fit” for your process calibration requirements “Doing more with less” is a requirement every process manufacturer faces today. To maintain product quality, reduce waste, improve efficiency and conform to regulatory standards, instruments that measure process variables such as temperature and pressure must be calibrated at regular intervals. Selecting the right calibrator for the job, however, can be tricky—especially when attempting to balance precision and versatility with cost....

    Producto
  • Estuche para medidor Fluke C50

    Estuche de transporte con cremallera, bolsillo interior, presilla para cinturón y correa interior para sujeción del multímetro.

    Producto
  • Priority Gold Instrument CarePlan

    Peace of mind and maximum uptime from the people who know your Fluke product best

    Producto
  • Cuatro mitos sobre seguridad eléctrica que pueden sorprenderle

    Following electrical safety regulations in industrial plants is critical. But myths about electrical safety are rampant. Understand the facts vs myths about working in energized systems.

    Artículo
  • From screwdrivers to testers: Vibration analysis comes of age

    Most machines have rotating parts, and rotating parts vibrate. Measuring how and how much those parts vibrate can tell you a lot about the health of a machine.

    Artículo
  • Catch a first look of Fluke Condition Monitoring at WEFTEC 2016

    Water treatment system managers and technicians will get a first look at the new Fluke Condition Monitoring system at the 89th Annual Water Environment Federation Technical Exhibition and Conference (WEFTEC) to be held at the New Orleans Morial Convention Center, September 24-28. Fluke will be showing Fluke Condition Monitoring and an assortment of Fluke Connect wireless test tools for hands-on evaluations at booth 8320.

    Artículo
  • Programa de colaboración educativa de Fluke

    Fluke Educator Partnership Program Sign up for the Educator's Partnership Program and receive a 25% discount for products and materials and be eligible for Fluke grants!* We've teamed up with colleges, trade technical and vocational schools, and apprenticeship programs to bring the latest application information and tools into the classroom. Receive FREE materials PowerPoint presentations Application notes and case studies CDs, DVDs & Posters Free Shipping Equip your labs and help your students...

    Artículo
  • Plant Engineering recognizes the Fluke Connect reliability platform

    Fluke® Condition Monitoring and the Fluke® 279 FC Thermal Multimeter are finalists in the Maintenance Tools and Equipment category of the Plant Engineering 2016 Product of the Year Awards. The awards honor new products that help professionals do their jobs smarter, safer, more efficiently, and more productively as chosen by the magazine's subscribers.

    Artículo
  • ¿Qué es un osciloscopio?

    Basic information about what an oscilloscope is and how the test instruments are used in industrial settings for preventive maintenance and troubleshooting.

    Artículo
  • Reduce instrument maintenance costs by 40% or more with route-based work flows

    Using route-based maintenance, technicians are issued multiple tasks and work orders to perform—rather than completing one work order at a time. This practice reduces the time walking to and from the shop and can decrease instrument maintenance costs by 40% or more. Learn about the challenges of implementing a route-based work flow and the top five calibration test tools to improve your efficiency. Speak to a specialist

    Artículo
  • Política de privacidad de Fluke

    Privacy Policy Collection of Information Use of Information Sharing of Information Social Sharing Features Advertising and Analytics Services Prov ided by Others Security Your Choices Contact Us AVISO DE PRIVACIDAD DE FLUKE Última actualización: 21 de febrero de 2019 Si se encuentra en el Espacio Económico Europeo y sus datos personales se rigen por el Reglamento general de protección de datos (UE) 2016/679 y los actos de ejecución respectivos de los Estados miembros del Espacio Económico...

    Artículo
  • Insulation Resistance Testing

    This application note is about insulation resistance testing.

    Documento
  • Olympics And Winter Sports Article

    Article about how winter sports facilities are using Fluke tools to keep conditions perfect for athletes

    Documento
  • Todo lo que necesita saber sobre instrumentos para medida de vibraciones

    What You Need To Know About Vibration Tools, es

    Documento
  • 4332767-How You Measure Energy Matters

    Customers talk about the need for accurate, safe and reliable tools when measuring energy efficiency in buildings.

    Videos
  • Energy Measurement and the Bottom Line

    Customers talk about measuring energy usage to make informed decisions and how saving energy can positively affect the bottom line.

    Videos
  • How Measuring Energy Can Help You Save Money

    Customers talk about energy efficiency and how measurement is important in helping customers make decisions around energy usage. Conducting a commercial building energy audit can help them to save money.

    Videos
  • Top Five Thermal Inspection Points on a Motor

    Hear from Michael Steward with Fluke Thermography as he talks about using thermal imaging to inspect a common electrical motor for issues that might affect energy usage.

    Videos
  • Keeping Your Utility Bill Low with Power Factor Checks

    Join Randy Barnet with Fluke as he talks about power factor and with using the Fluke 1735 power logger you can isoloate and identify the power factor problem, including steps on what to do about it.

    Videos
  • Fluke Thermal Imaging: The Value of Measuring Energy

    Customers talk about the value in measuring energy efficiency in buildings.

    Videos
  • Conexión a un dispositivo móvil

    500 Series Battery Analyzers Mobile Device. To learn more about Fluke Battery Analyzers: http://bit.ly/2gYzsNP

    Videos
  • Logging Capture and Sample Rate on aFluke 435 II

    In this video, you’ll learn about logging capture and sample rate on a Fluke 435 II.

    Videos
  • Test Leads Probes and Accessories

    The kit includes all the SureGrip™ leads and probes in a handy roll-up pouch. In this video, you’ll learn about various test leads, probes and accessories.

    Videos
  • How to Select the Right Fluke IR Window

    Inspect your indoor switchgear safely with the latest IR Windows from Fluke. If you are concerned about arc-flash or electrocution risk, the latest IR Windows can help increase the safety of your personnel and reduce the cost of predictive maintenance, in compliance with indoor/outdoor switchgear codes. In this video, you’ll learn how to select the right Fluke IR window.

    Videos