Search results

Only search for:
Found 100 results containing the words:<front>
  • Replacing PACE 6000 with the 6270A Modular Pressure Controller/Calibrator

    See the benefits of upgrading the GE Druck PACE 6000 to the Fluke 6270A & learn steps for configuring and installing the 6270A. Get the details here.

    Article
  • Replacing PACE 5000 with the 6270A Modular Pressure Controller/Calibrator

    This application note summarizes some of the benefits of upgrading to the 6270A, as well as detailing the steps for configuring and installing the 6270A as a replacement to the PACE 5000.

    Article
  • Understanding the basics of digital multimeter calibration

    See the steps for how to calibrate a digital multimeter, plus links to 5 free related learning resources including videos, webinars, and articles.

    Article
  • Modularity in pressure calibration systems

    Read this free app note to learn the benefits of modular pressure calibration systems over monolithic & learn how to assess what modular system fits you best.

    Article
  • Making the Right Choice for Your Temperature Readout

    Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

    Article
  • What else is needed to complete the pressure calibration solution?

    See "Are pressure generation and control required?" and specific product specifications to determine what is needed. Most needed hardware can be found in the Pressure calibration accessories section.

    Article
  • 7004N/7010N Nanoscan Volt Maintenance System

    The Fluke 7004N & 7010N Nanoscan Volt Maintenance Systems have been upgraded to the Fluke 734A voltage reference and DC voltage standard. Learn more.

    Products
  • 80/81 Function Pulse Generators

    80/81 Function Pulse Generators from Fluke Calibration offers linear & logarithmic sweep functions, external FM & capabilities for both analog & digital applications.

    Products
  • ADCS-601 Air Data Calibration Standard

    The Fluke Calibration ADCS-601 is a fully automated reference level Air Data Calibration Standard for the verification and calibration of air data range instruments, in particular Air Data Test Sets (ADTS).

    Products
  • Infrared Thermometer Calibration - A Complete Guide

    With proper setup and planning, infrared thermometer calibrations can be accurate. The steps outlined below should be followed to perform accurate infrared thermometer calibrations. Much of the information presented here is contained in ASTM E2847, “Standard Practice for Calibration and Accuracy Verification of Wideband Infrared Thermometers.”Sources of uncertaintyThere are several sources of uncertainty which contribute greatly to an infrared thermometer calibration. These sources are summarized...

    Article
  • 6332A / 7342A Temperature Calibration Baths

    The 6332A / 7342A Temperature Calibration Baths are ideal for lab managers and technicians in government, corporate, and independent calibration labs who need a bath with good stability, uniformity, and speed to temperature for calibrating thermometers and sensors of various sizes and shapes.

    Products
  • 5520A High Performance Multi-Product Calibrators

    The Fluke 5520A multi-product calibrator has been upgraded to the 5522A. By clicking, you’ll go to the old 5520A page that has a link to the new 5522A.

    Products
  • 525B Temperature/Pressure Calibrator

    525B temperature/pressure calibrator is the most accurate Fluke Calibration temperature calibrator & also provides high accuracy for pressure calibration.

    Products
  • 525A Temperature/Pressure Calibrator

    The Fluke 525A temperature / pressure calibrator has been replaced by the 525B. By clicking, you’ll go to the old 525A page that has a link to the new 525B.

    Products
  • 8588A Reference Multimeter

    Designed for calibration laboratories, the 8588A Reference Multimeter is the world’s most stable high-precision multimeter. Get the specs & more details here.

    Products
  • molbox1+ Flow Terminal

    molbox1+ from Fluke Calibration is the ideal solution for calibrating gas flow meter, mass flow controllers, rotameters, bubble meters & other flow measurement devices.

    Products
  • 8558A 8.5 Digit Multimeter

    The 8558A 8.5-digit multimeter offers 5 mega-samples-per-second high resolution digitizing for system automation in labs and manufacturing test environments.

    Products
  • 4322 Automated Pressure Calibration System

    The 4322 Automated Pressure Calibration System calibrates almost any pressure gauge, transducer, transmitter or switch—including vacuum, compound, absolute & high-pressure devices.

    Products
  • 280 Series Waveform Generators

    280 series waveform generators from Fluke Calibration are highly sophisticated 12-bit arbitrary generators capable of recreating virtually any waveform.

    Products
  • 5790A AC Measurement Standard

    5790A AC measurement standard is compatible with current shunts & is designed for the most demanding calibration applications. Request a product quote today!

    Products
  • 5700A/5720A Multifunction Calibrators

    5700A/5720A multifunction calibrators are easy to use, cost effective, rugged & meet all demands for electrical calibration. Request a quote today.

    Products
  • Release: MET/TEAM version 3.0.0 (with MET/CAL version 10.2.0)

    Release: MET/TEAM version 3.0.0 (with MET/CAL version 10.2.0) (.iso)Documents:MET/TEAM version 3.0.0 (with MET/CAL version 10.2.0) (.pdf)MET/TEAM 3.0.0 ReadMe (.pdf)MET/CAL 10.2.0 ReadMe (.pdf)MET/TEAM Installation Guide (Updated for version 3.0) (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.0.0 and MET/CAL version 10.2.0 release is a a major update to MET/TEAM and MET/CAL software. This update includes new features, improvements, bug fixes, and minor...

    Article
  • MET/TEAM® v3.3.0 and MET/CAL® v11.0.0 Software Trial

    Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)Documents:MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)MET/TEAM 3.1.1 Readme (.pdf)Update Instructions for MET/TEAM 3.1.1 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You...

    Article
  • COMPASS for Pressure Calibration Software Download/Upgrade

    COMPASS for Pressure Basic (.exe)Additional Downloads:COMPASS for Pressure Basic, Demo (.exe)COMPASS for Pressure Basic, Upgrade (.exe)COMPASS for Pressure Enhanced (.exe)COMPASS for Pressure Enhanced, Demo (.exe)COMPASS for Pressure Enhanced, Upgrade (.exe)TITLEVERUSE WITHDOCUMENTSCOMPASS®for Pressure™5.2.102024.05.21FPG8601, PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCH, PPCK, PPCK+, RPM3, RPM4, 7050, 7052, 7250, 7252, 7350, 7615, 7750, 7010, 7215, 2465, 2456, 2271A, 6270A, 8270A, 8370A,Third...

    Article
  • Update: MET/CONNECT version 1.3.0 (with MET/CAL version 10.2.3)

    Update: MET/CONNECT version 1.3.0 (with MET/CAL version 10.2.3) (.zip)Documents:MET/CONNECT 1.3.0 Installation Guide (.pdf)MET/CONNECT 1.3.0 Readme (.pdf)MET/CAL 10.2.3 Readme (.pdf)Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 1.3.0 and MET/CAL version 10.2.3 release is an update to previous MET/CONNECT and MET/CAL software. This update includes bug fixes and minor updates.You must be running MET/CONNECT version 1.2.0 before upgrading to version 1.3.0.This...

    Article
  • Update: MET/CONNECT version 1.2.0 (with MET/CAL version 10.2.2)

    Update: MET/CONNECT version 1.2.0 (with MET/CAL version 10.2.2) (.zip)Documents:MET/CAL 10.2.2 readme (.pdf)MET/CONNECT 1.2.0 readme (.pdf)MET/CONNECT 1.2.0 Installation Guide (.pdf)Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 1.2.0 and MET/CAL version 10.2.2 release is an update to previous MET/CONNECT and MET/CAL software. This update includes bug fixes and minor updates.You must be running MET/CONNECT version 1.1.0 before upgrading to version 1.2.0.This...

    Article
  • 6105A, 6100B Electrical Power Quality Calibrator

    6105A and 6100B electrical power calibrator from Fluke Calibration has high accuracy for calibrating secondary standard energy meters & type test applications.

    Products
  • PG7000-AMH - Automated Mass Handler for PG7000 Piston Gauges

    Fluke Calibration's PG7000-AMH is an add-on accessory that automates mass handling over the complete piston gauge pressure range.

    Products
  • Update: MET/CAL version 10.2.2 for MET/TEAM version 3.0.0

    Update: MET/CAL version 10.2.2 for MET/TEAM version 3.0.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available with the MET/CONNECT 1.2.0 installer.Current MET/TEAM Customers:MET/CAL version 10.2.2 release is an update to previous MET/CAL software. This update includes bug fixes and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you...

    Article
  • RPM4-AD v1.00f Embedded Software

    RPM4-AD v1.00f Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4-AD™1.00f2010.12.28RPM4-ADDo NOT use with NON "-AD" (Air Data)RPM4 ModelsInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an...

    Article
  • Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0)

    Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from either version 3.0.0 or 3.1.0 directly to version 3.1.1.Upgrading from version 3.0.0 or 3.1.0 of MET/TEAM will not require you to re-request your...

    Article
  • Release: MET/TEAM version 3.1.0 (with MET/CAL version 10.5.0)

    Release: MET/TEAM version 3.1.0 (with MET/CAL version 10.5.0) (.iso)Documents:MET/TEAM 3.1.0 Readme (.pdf)MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)Update Instructions for MET/TEAM 3.1.0 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.0 and MET/CAL version 10.5.0 release is a a major update to MET/TEAM and...

    Article
  • PPCH-G v1.02k Embedded Software

    PPCH-G v1.02k Embedded Software (.bin)TITLEVERUSE WITHPPCH-G™1.02k2023.11.08PPCH-GInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded...

    Article
  • PPCH-G v1.02f Embedded Software

    PPCH-G v1.02f Embedded Software (.bin)TITLEVERUSE WITHPPCH-G™1.02f2012.04.04PPCH-GInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded...

    Article
  • PPCH 1.01n Embedded Software

    PPCH 1.01n Embedded Software (.bin)TITLEVERUSE WITHPPCH™1.01n2013.07.22PPCHInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded software.The...

    Article
  • PPC4E v1.2.6.15 Embedded Software

    PPC4E v1.2.6.15 Embedded Software (.bin)TITLEVERUSE WITHPPC4E™1.2.6.15PPC4EInstructions:Download the file by clicking on "PPC4E v1.2.6.15.bin".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it...

    Article
  • PPC4 v1.2.6.14 Embedded Software

    PPC4 v1.2.6.14 Embedded Software (.bin)TITLEVERUSE WITHPPC4™1.2.6.14PPC4 (including -AF models)Instructions:Download the file by clicking on "PPC4 v1.2.6.14.bin".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

    Article
  • 96270A 27 GHz Low Phase Noise Reference Source

    The 27 GHz Fluke Calibration 96270A RF Reference Source is the simplest, most accurate and cost effective single instrument for calibrating spectrum analyzers and RF power sensors and more.

    Products
  • 9118A Thermocouple Calibration Furnace

    The Fluke Calibration 9118A Thermocouple Calibration Furnace is a horizontal, open-ended tube furnace with a temperature range of 300 °C to 1200 °C.

    Products
  • 9114, 9115A, 9116A Freeze-point furnaces

    9114, 9115A, 9116A Freeze-point furnaces from Fluke Calibration are very stable & can be used to maintain metal fixed-points for hours to calibrate your SPRT.

    Products
  • 910/910R GPS Frequency Standards

    GPS frequency standards by Fluke Calibration have accurate gps frequency references that can be installed, monitored & managed virtually from any location.

    Products
  • 8270A and 8370A Modular High-Pressure Controllers / Calibrators

    These pneumatic high-pressure controllers calibrate a wide workload of pressure sensors, covering 2X the pressure ranges at 2X the speed of other controllers.

    Products
  • 7050/7050i Digital Pressure Indicators

    The Model 7050 High Precision Digital Indicator from Fluke Calibration is a high precision instrument used for pressure measurement and as a calibration system.

    Products
  • 720A Kelvin-Varley Divider

    Model 720A Kelvin-Varley Divider is a high-resolution primary ratio standard with absolute linearity of 0.1 ppm, temperature coefficient of linearity of 0.1 ppm/ºC, and self-calibration capability.

    Products
  • 6331/7341/7381 Deep-Well Compact Baths

    Calibration baths from Fluke Calibration offer high stability, flexibility , and are a preferred choice of National Metrology Institutes. Contact us today for more information.

    Products
  • 5322A Electrical Safety Tester Calibrator

    The 5322A Electrical Tester Calibrator helps calibration technicians comply with new regulatory standards up to four times faster than with traditional methods.

    Products
  • 5790B AC Measurement Standard

    The 5790B AC Measurement Standard is a multi-purpose ac measurement and transfer standard designed for the most demanding calibration applications.

    Products
  • PG7000 Ver 2.07h Embedded Software

    PG7000 Ver 2.07h Embedded Software (.bin)TITLEVERUSE WITHPG7000™2.07hAll PG7000 Series modelsInstructions:-Ver 2.02x and 2.03x Users You can upgrade directly to this version with no special considerations.-Ver 2.01x UsersVer 2.02 is a major revision which should be accompanied by hardware changes.-Ver 1.0x UsersVer 2.01 is a major revision which should be accompanied by hardware changes. Contact a Fluke Calibration Authorized Service Center for additional information.Download the file. Run Winflash and...

    Article
  • 5128A RHapid-Cal® Humidity Generator

    The Fluke Calibration 5128A RHapid-Cal Humidity Generator is a portable humidity generator for calibrating a large workload of probes in the laboratory or on-site in the field.

    Products
  • 2100 and 2200 Benchtop Temperature Controllers

    Improve calibration bath performance with Fluke Calibration’s most stable temperature controllers with resolution as high as 0.00018°C.

    Products
  • 9210 Mini Triple Point of Water Maintenance Apparatus

    9210 Mini triple point of water maintenance apparatus from Fluke Calibration is inexpensive, easy-to-use & provides built-in programming for the simple shake realization.

    Products
  • 7900 Controller for Rosemount-Designed Baths

    Fluke Calibration’s Bath Controllers are among the finest in the world and are easy to install, provides stability of ± 0.003 °C & records tiny resistance change accurately.

    Products
  • molbox1+ or molbox1+S v6.01 Embedded Software

    molbox1+ or molbox1+S v6.01 Embedded Software (.bin)TITLEVERUSE WITHmolbox1+/molbox1+S™6.012016.12.16molbox1+/molbox1+STITLEVERUSE WITHmolbox1+/molbox1+S™6.012016.12.16molbox1+/molbox1+SThis flash is intended ONLY for molbox1+ or molbox1+S with the Fluke Calibration logo: on the front panel, serial number 2000 and above. Attempted use on any other molbox will result in an inoperable molbox unless the molbox1 hardware is upgraded to a molbox1+.For a molbox1 WITHOUT the Fluke Calibration logo,...

    Article
  • molbox1 v5.41 Embedded Software

    molbox1 v5.41 Embedded Software (.bin)TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

    Article
  • COMPASS® for Pressure Version 4 Release Notes

    Download COMPASS® for PressureVersion 4 Releases4.2 (2012.07.27)ADDCP-115%4COMPASS for Pressure now supports the calibration functions of CalTool for RPTs. This functionality allows users to fully adjust and report calibration results for supported Fluke products. Sample tests are included with COMPASS that support automated collection of as received data and as left data with an adjustment in between. Review the CalTool for RPTs application note for details. The COMPASS CalTool implementation supports...

    Article
  • COMPASS® for Pressure Version 3 Release Notes

    Download COMPASS® for PressureVersion 3 Releases3.00.43 (SP1) (2011.02.11)ADDCP-802Support PG7000 and PG9000 models that respond with FLUKE as the manufacturer.CHGCP-793An automated PG7000/PG9000 system with a PPC and AMH will use ATM as the minimum pressure when exercising in a test that is run in Absolute by ATM.3.00.42 (SP1) (2010.07.07)ADDCP-689Support alternate units of measure and temperature references for the Piston Cylinder effective area.ADDCP-775Added new instruments to the default database.CHGCP-786When...

    Article
  • COMPASS for molbox PC Based Software Download/Upgrade

    COMPASS for molbox PC Based Software Demo (.exe)COMPASS for molbox PC Based Software Upgrade (.exe)TITLEVERUSE WITHCOMPASS®for molbox™4.062010.10.28TITLEVERUSE WITHCOMPASS®for molbox™4.062010.10.28molbox1, molbox1+, molbox RFMDescriptionThis download file provides 100 hours of fully functioning use of COMPASS for molbox. Licensed users can download this file to upgrade from a previous version of COMPASS for molbox.  SummaryCOMPASS for molbox is a complete flow calibration software package...

    Article
  • COMPASS for Flow PC Based Software Download/Upgrade

    COMPASS for Flow PC Based Software (.exe)Additional Downloads:COMPASS for Flow, PC Based Software, Demo (.exe)COMPASS for Flow, PC Based Software, Upgrade (.exe)Patch to use COMPASS for Flow 4.0 with MET/TRACK 7.3 SP1 (.zip)Patch to use COMPASS for Flow 4.0 with MET/TRACK 8.X (.zip)TITLEVERUSE WITHDOCUMENTSCOMPASS®for Flow™5.1.0molbox1, molbox1+, molbox1+S, molbox RFM, MFC-CB, MFC SwitchboxCOMPASS for Flow uses an on line HTML help system that is installed with the program. Install and run COMPASS...

    Article
  • CalTool for RPTs Free Utility

    CalTool for RPTs Free Utility (57.61 MB)TITLEVERUSE WITHDOCUMENTSCalTool™ for RPTs Free Utility1.10.0.252021.05.11PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCK, PPCK+, RPM1, RPM3, RPM4, PPCH, PPCH-G, molbox1, molbox RFMCalTool for RPTs uses an on line HTML help system that is installed with the program. Install and run CalTool then select the [Help] menu to access the help system.(Note: As a result of PC specific security settings the help may not display correctly when viewed over the Internet....

    Article
  • 8588A & 8558A Firmware, Update by USB

    8588A & 8558A Firmware, Update by USB (.zip)TITLEUSE WITH8588A & 8558AAllThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by USBFluke 85xx update v1.32To update a Fluke 8588A/8558AAn empty USB stick (of greater than 10Mbytes) will be required. This should be formatted using...

    Article
  • 1560 Black Stack Thermometer Readout

    Fluke Calibration’s Black Stack thermometer readout is one of the most versatile, cost-effective & accurate readouts in the world. Learn more.

    Products
  • 5730A High Performance Multifunction Calibrator

    The Fluke Calibration 5730A High Performance Multifunction Calibrator is the culmination of years of engineering development, customer research and industrial design, to bring to market the new “gold standard” in electrical multifunction calibration.

    Products
  • 5725A Amplifier

    The 5725A Amplifier enhances the 5700A and 5720A Multifunction Calibrators in the ac voltage, ac current, and dc current functions.

    Products
  • Automating temperature sensor calibration with the Fluke Calibration 1586A Super-DAQ

    Use the 1586A Super-DAQ to automate temperature sensor calibration The 1586A Super-DAQ Precision Temperature Scanner provides a unique feature for automating sensor calibration that can greatly increase your lab productivity—without a PC and software. When the Super-DAQ is connected to a Fluke Calibration dry-well or fluid bath, it can control the temperature source to run the calibration automatically. You simply program the number of set-point temperatures and their values, select a scan sequence,...

    Article
  • Improving triple point of water cell accuracy

    The triple point of water (TPW) is the only thermometric fixed point used in definitions of both the thermodynamic temperature and the international temperature scale. It is undoubtedly the most important fixed point in thermometry. Some results from the international comparison of TPW cells undertaken a few years ago found differences among TPW cells as large as 0.1 mK or more. This is why we started working to improve the quality of our TPW cells about four years ago.As we know, impurities in the...

    Article
  • How do wire tracers work?

    A professional-grade wire tracer helps electricians trace wiring through walls, under floors, and in tight spaces without time-consuming guesswork. Here we explain how a wire tracer works to help an electrician locate a fault quickly and what they should look for when selecting a wire tracer for their tool kit.

    Article
  • Fluke Calibration 9144 Metrology Well

    The 9144 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

    Products
  • Fluke Calibration 9143 Field Metrology Well

    The 9143 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

    Products
  • Fluke Calibration 9142 Field Metrology Well

    The 9142 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

    Products
  • Fluke Calibration 1502A/1504 Thermometer Readout

    The 1502A and 1504 reference thermometers will read RTDs, PRDs, and thermistor sensors. Primary temperature standards, secondary temperature standards, fixed-point cells, water triple points, SPRTs, calibration baths, dry-block calibrators and temperature metrology training can also be found on this site.

    Products
  • Fluke 9132/9133 Portable Infrared Calibrator with Blackbody Source

    Our portable IR calibrators provide stable blackbody targets for calibrating noncontact IR thermometers from –30 °C to 500 °C

    Products
  • Fluke Calibration 9103/9140 Field Dry-Well

    If you’ve been using dry-well calibrators for field work, you know there’s a lot more to a dry-well than its temperature range and stability.

    Products
  • Fluke 1750-TF Three-Phase Power Quality Recorder

    Record three-phase power quality monitoring for power quality disturbances with the new Fluke 1750 Power Recorder and the Fluke Power Analyze software.

    Products
  • Fluke 1750/B Three-Phase Basic Power Quality Recorder

    Record three-phase power quality monitoring for power quality disturbances with the new Fluke 1750 Power Recorder and the Fluke Power Analyze software.

    Products
  • Fluke 177 True-RMS Digital Multimeter with display backlight

    Measure twice as fast as other multimeters with Fluke 177 Digital Multimeters; digital display with analog bar graph and backlight.

    Products
  • Fluke a3002 FC Wireless AC/DC Current Module

    AC/DC current module that wirelessly relays measurements from current clamp accessories to other Fluke Connect® enabled master units

    Products
  • Fluke a3000 FC Wireless AC Current Clamp Module

    A fully functional true-rms current clamp meter that wirelessly relays measurements to other Fluke Connect® enabled master units

    Products
  • Inspect moving machinery by putting the 'freeze' on

    New stroboscope helps frontline mechanical troubleshooting teams precisely measure machine rotation and oscillation without shutting down the equipment.

    Article
  • Fluke 179 TRMS Digital Multimeter with temperature readings

    Industry-standard troubleshooting tester for electrical systems.

    Products
  • Fluke TiS75 Infrared Camera

    With 320x240 resolution and manual focus, the TiS75 produces professional quality images to make it easy to both see and solve the problem.

    Products
  • How to measure electricity from a safe distance

    How to measure electricity from a safe distance

    Article
  • Understanding Vibration Monitoring and Analysis

    Vibration testing for condition-based maintenance, to reduce costs and production losses. Mechanics of testing, analyzing roller bearing faults.

    Article
  • Testing your test leads

    Checking your test leads to make sure they are in good condition and rated for the job at hand is the best insurance for accuracy and safety

    Article
  • Moving from reactive to predictive maintenance

    Fluke News Plus Predictive Maintenance Archive Articles

    Article
  • New Fluke 805 FC Vibration Meter is the latest addition to Fluke Connect – the world's largest wireless system of test and measurement tools

    Fluke Corp. introduces the Fluke® 805 FC Vibration Meter, a portable multifunction vibration screening tool that provides quantifiable information on the bearing and overall health of motors and other rotating equipment, and shares that data in real time via Fluke Connect®. The Fluke 805 FC is ideal for frontline mechanical troubleshooting teams that need reliable and repeatable measurements of rotating equipment to make imperative go/no-go maintenance decisions.

    Article
  • Chasing "ghost" trips in GFCI-protected circuits

    This issue of "Solid Ground" talks about ground fault circuit interrupters (GFCIs), why they are necessary, and how to troubleshoot GFCI-protected circuits.

    Article
  • Earth ground testing for mine sites with Fluke 1625

    All mine sites have grounded electrical systems, so that in the event of a lightning strike or utility overvoltage or ground fault, the current would be able to find a safe path to earth or the neutral of the transformer.

    Article
  • Multimeter measurements on adjustable speed drives utilizing the new Fluke 87V DMM

    In the past, motor repair meant dealing with traditional three-phase motor failures that were largely the result of water, dust, grease, failed bearings, misaligned motor shafts, or just plain old age. But motor repair has changed in a big way with the introduction of electronically controlled motors, more commonly referred to as adjustable speed drives (ASDs).

    Article
  • Breaking new ground without breaking the loop

    Early reports from the field suggest that the new Fluke 772 and 773 Milliamp Process Clamp Meters may be game changers, breaking new ground for technicians in the HVAC controls industry. With the feature sets these meters offer, troubleshooting of the most common problems in modern control systems becomes a snap.

    Article
  • A behind-the-scenes look at product innovation at Fluke

    Fluke News Plus Research Archive Articles

    Article
  • Have you ever wondered about the efficiency of your fireplace?

    Beyond the basics: Have you ever wondered about the efficiency of your fireplace?

    Article
  • Tough Places, Tough Tools

    Out on the job site, concrete finishers stand ready to shape wet ready-mix into a new stretch of highway. Mixer trucks are lined up at the concrete batch plant,waiting to take on their loads. But hold on—an electrical problem has shut down the plant. It's time to call Keithly Electric.

    Article
  • How to come home safely at the end of the day

    Electrical safety requirements for using digital multimeters per OSHA and NFPA 70E

    Article
  • Case study: Texas power consultant keeps uninterruptible power supplies up and running

    Critical systems run smoothly with regular maintenance and reliable tools Everybody knows that consistent, dependable electrical power is critical to any plant's function. But perhaps even more critical is a reliable uninterruptible power supply (UPS) system. UPS systems are the silent partners that just sit and wait until there's a break in power. At that point, the UPS system is the most important system in the plant. It has to be ready to spring into action in milliseconds to keeps things running for anywhere from seconds to hours.

    Article
  • What is the relationship between oscilloscope bandwidth and waveform rise time?

    The formula can be stated in two ways, depending on what you're looking for. It is usually applied to the leading edge of a pulse in a dynamic system and is related to resistor-capacitor filter time constants and settling times.

    Article
  • Five problems you will never uncover with a digital multimeter

    The importance of investing in the right set of tools to monitor power quality issues, and prevent them in the future, can't be emphasized enough. Fluke offers an extensive range of excellent power meters and other power quality tools for troubleshooting, preventive maintenance, and long-term recording and analysis in industrial applications and utilities.

    Article
  • Troubleshooting web-based HVAC control system networks

    Scenarios showing how to prevent system failures and downtime caused by HVAC network problems.

    Article
  • Improve your team productivity when working on variable air volume (VAV) systems

    In my role as a consultant and trainer, I spend a lot of time working with facility maintenance personnel. Recently I was recently given a formidable task by the maintenance leadership of the plant services shop of a large university.

    Article
  • Measuring air velocity with the Fluke 975 AirMeter™: Using the Velocity Probe

    Air velocity is a key parameter in evaluating airflow system performance. As part of basic testing, adjusting and balancing of HVAC air distribution systems, most HVAC technicians now use an anemometer to measure air velocity at grilles-registers-diffusers, within a duct, or in open spaces.

    Article
Chat with ourFluke assistant
Clear Chat