Search results

In this article, electrical calibration expert Marty Kidd explains why someone needs this type of product. He also explains why owners of an old Fluke 5790A should consider moving up to a new 5790B.

See the benefits of upgrading the GE Druck PACE 6000 to the Fluke 6270A & learn steps for configuring and installing the 6270A. Get the details here.

This application note summarizes some of the benefits of upgrading to the 6270A, as well as detailing the steps for configuring and installing the 6270A as a replacement to the PACE 5000.

See the steps for how to calibrate a digital multimeter, plus links to 5 free related learning resources including videos, webinars, and articles.

Read this free app note to learn the benefits of modular pressure calibration systems over monolithic & learn how to assess what modular system fits you best.

Fluke Calibration produces the broadest range of electrical, RF, temperature, pressure & flow calibration instruments & software that help measurement professionals around the globe.

See "Are pressure generation and control required?" and specific product specifications to determine what is needed. Most needed hardware can be found in the Pressure calibration accessories section.

This optional kit makes the 5560A, 5550A or 5540A Muti-Product Calibrator an excellent fit for on-site or mobile calibration

The Fluke Calibration ADCS-601 is a fully automated reference level Air Data Calibration Standard for the verification and calibration of air data range instruments, in particular Air Data Test Sets (ADTS).

With proper setup and planning, infrared thermometer calibrations can be accurate. The steps outlined below should be followed to perform accurate infrared thermometer calibrations. Much of the information presented here is contained in ASTM E2847, “Standard Practice for Calibration and Accuracy Verification of Wideband Infrared Thermometers.”Sources of uncertaintyThere are several sources of uncertainty which contribute greatly to an infrared thermometer calibration. These sources are summarized...

Hi, this is Jeff Grossman, Sales Engineer for Fluke Calibration’s pressure and mass flow calibration solutions, here to provide you with a demonstration of one of our three modular pressure controllers. I happen to have here the 8270A which has a maximum pressure of 6000 psi complemented by the 6270A maximum pressure of 3000 psi and the 8370A with maximum pressure of 15,000 psi. The nice thing is they share a lot of commonality which makes them easy to switch between and easy to use.Very small...

The Fluke 2620T/2635T Recording Thermometer is a precision multi channel temperature recording and logging instrument that delivers up to 0.1 degree accuracy (3 sigma, one year accuracy specification) for temperature monitoring and calibration applications

Thermocouple calibrator from Fluke Calibration is very stable, CE compliant & can operate in wide temperature range. Request a quote today.

5700A/EP from Fluke Calibration is an upgrade service that extends both the performance & service life of your existing 5700A Multifunction Calibrator.

5522A is a resistance calibrator that calibrates a wide variety of electrical test equipment, provides reverse power protection and is remarkably affordable.

525B temperature/pressure calibrator is the most accurate Fluke Calibration temperature calibrator & also provides high accuracy for pressure calibration.

The Fluke 525A temperature / pressure calibrator has been replaced by the 525B. By clicking, you’ll go to the old 525A page that has a link to the new 525B.

9100 from Fluke Calibration is the world’s best value multiproduct calibrator can calibrate over 15 different equipments including power meter, insulation tester and oscilloscopes.

752A reference divider compensates for long-term changes in value of the divider resistors by switching positions in various Wheatstone bridge configuration

Designed for calibration laboratories, the 8588A Reference Multimeter is the world’s most stable high-precision multimeter. Get the specs & more details here.

Fluke Calibration's OPG1-30000 provides an alternative for generating and adjusting high liquid pressures in calibration and test systems.

The 8558A 8.5-digit multimeter offers 5 mega-samples-per-second high resolution digitizing for system automation in labs and manufacturing test environments.

The 4322 Automated Pressure Calibration System calibrates almost any pressure gauge, transducer, transmitter or switch—including vacuum, compound, absolute & high-pressure devices.

Release: MET/TEAM version 3.0.0 (with MET/CAL version 10.2.0) (.iso)Documents:MET/TEAM version 3.0.0 (with MET/CAL version 10.2.0) (.pdf)MET/TEAM 3.0.0 ReadMe (.pdf)MET/CAL 10.2.0 ReadMe (.pdf)MET/TEAM Installation Guide (Updated for version 3.0) (.pdf)Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.0.0 and MET/CAL version 10.2.0 release is a a major update to MET/TEAM and MET/CAL software. This update includes new features, improvements, bug fixes, and minor...

Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)Documents:MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)MET/TEAM 3.1.1 Readme (.pdf)Update Instructions for MET/TEAM 3.1.1 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You...

COMPASS for Pressure Basic (.exe)Additional Downloads:COMPASS for Pressure Basic, Demo (.exe)COMPASS for Pressure Basic, Upgrade (.exe)COMPASS for Pressure Enhanced (.exe)COMPASS for Pressure Enhanced, Demo (.exe)COMPASS for Pressure Enhanced, Upgrade (.exe)TITLEVERUSE WITHDOCUMENTSCOMPASS®for Pressure™5.2.102024.05.21FPG8601, PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCH, PPCK, PPCK+, RPM3, RPM4, 7050, 7052, 7250, 7252, 7350, 7615, 7750, 7010, 7215, 2465, 2456, 2271A, 6270A, 8270A, 8370A,Third...

Update: MET/CONNECT version 1.3.0 (with MET/CAL version 10.2.3) (.zip)Documents:MET/CONNECT 1.3.0 Installation Guide (.pdf)MET/CONNECT 1.3.0 Readme (.pdf)MET/CAL 10.2.3 Readme (.pdf)Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 1.3.0 and MET/CAL version 10.2.3 release is an update to previous MET/CONNECT and MET/CAL software. This update includes bug fixes and minor updates.You must be running MET/CONNECT version 1.2.0 before upgrading to version 1.3.0.This...

Update: MET/CONNECT version 1.2.0 (with MET/CAL version 10.2.2) (.zip)Documents:MET/CAL 10.2.2 readme (.pdf)MET/CONNECT 1.2.0 readme (.pdf)MET/CONNECT 1.2.0 Installation Guide (.pdf)Current MET/CONNECT Customers: What you need to know prior to updatingThe MET/CONNECT version 1.2.0 and MET/CAL version 10.2.2 release is an update to previous MET/CONNECT and MET/CAL software. This update includes bug fixes and minor updates.You must be running MET/CONNECT version 1.1.0 before upgrading to version 1.2.0.This...

6105A and 6100B electrical power calibrator from Fluke Calibration has high accuracy for calibrating secondary standard energy meters & type test applications.

Update: MET/CAL version 10.2.2 for MET/TEAM version 3.0.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available with the MET/CONNECT 1.2.0 installer.Current MET/TEAM Customers:MET/CAL version 10.2.2 release is an update to previous MET/CAL software. This update includes bug fixes and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you...

RPM4-AD v1.00f Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4-AD™1.00f2010.12.28RPM4-ADDo NOT use with NON "-AD" (Air Data)RPM4 ModelsInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an...

RPM4 v1.01I Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4™1.01I2019.04.28RPM4Note: If you have a special RPM4model use these links:RPM4-AD™RPM4-AF™RPM4-E-DWT A70M/A7M-AF™RPM4-E-DWT™Please contact our Calibration and Repair department at 602.773.4782 if you recently upgraded to version 1.01f or plan to upgrade from 1.01f to another version. The upgrade path from 1.01f may cause a potentially significant metrological error.Instructions:Download the file.Run Winflash and select...

Release: MET/TEAM version 3.1.1 (with MET/CAL version 10.5.0) (.iso)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.1 release is a a minor update to MET/TEAM software. This update includes new features, improvements, bug fixes, and minor updates.You may upgrade from either version 3.0.0 or 3.1.0 directly to version 3.1.1.Upgrading from version 3.0.0 or 3.1.0 of MET/TEAM will not require you to re-request your...

Release: MET/TEAM version 3.1.0 (with MET/CAL version 10.5.0) (.iso)Documents:MET/TEAM 3.1.0 Readme (.pdf)MET/CAL 10.5.0 Readme (.pdf)MET/TEAM Installation Guide (.pdf)Update Instructions for MET/TEAM 3.1.0 and MET/CAL 10.5.0 (.pdf)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers: What you need to know prior to updatingThe MET/TEAM version 3.1.0 and MET/CAL version 10.5.0 release is a a major update to MET/TEAM and...

PPCH-G v1.02k Embedded Software (.bin)TITLEVERUSE WITHPPCH-G™1.02k2023.11.08PPCH-GInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded...

PPCH-G v1.02f Embedded Software (.bin)TITLEVERUSE WITHPPCH-G™1.02f2012.04.04PPCH-GInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded...

PPCH 1.01n Embedded Software (.bin)TITLEVERUSE WITHPPCH™1.01n2013.07.22PPCHInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded software.The...

PPC4E v1.2.6.15 Embedded Software (.bin)TITLEVERUSE WITHPPC4E™1.2.6.15PPC4EInstructions:Download the file by clicking on "PPC4E v1.2.6.15.bin".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it...

PPC4 v1.2.6.14 Embedded Software (.bin)TITLEVERUSE WITHPPC4™1.2.6.14PPC4 (including -AF models)Instructions:Download the file by clicking on "PPC4 v1.2.6.14.bin".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

PPC2-AF v1.01e Embedded Software (.bin)TITLEVERUSE WITHPPC3™1.03d2011.10.21PPC3 (including -AF models)Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should only be performed after...

The Fluke Calibration 9118A Thermocouple Calibration Furnace is a horizontal, open-ended tube furnace with a temperature range of 300 °C to 1200 °C.

9114, 9115A, 9116A Freeze-point furnaces from Fluke Calibration are very stable & can be used to maintain metal fixed-points for hours to calibrate your SPRT.

Model 720A Kelvin-Varley Divider is a high-resolution primary ratio standard with absolute linearity of 0.1 ppm, temperature coefficient of linearity of 0.1 ppm/ºC, and self-calibration capability.

The 5322A Electrical Tester Calibrator helps calibration technicians comply with new regulatory standards up to four times faster than with traditional methods.

The 5790B AC Measurement Standard is a multi-purpose ac measurement and transfer standard designed for the most demanding calibration applications.

PG7000 Ver 2.07h Embedded Software (.bin)TITLEVERUSE WITHPG7000™2.07hAll PG7000 Series modelsInstructions:-Ver 2.02x and 2.03x Users You can upgrade directly to this version with no special considerations.-Ver 2.01x UsersVer 2.02 is a major revision which should be accompanied by hardware changes.-Ver 1.0x UsersVer 2.01 is a major revision which should be accompanied by hardware changes. Contact a Fluke Calibration Authorized Service Center for additional information.Download the file. Run Winflash and...

Improve calibration bath performance with Fluke Calibration’s most stable temperature controllers with resolution as high as 0.00018°C.

9210 Mini triple point of water maintenance apparatus from Fluke Calibration is inexpensive, easy-to-use & provides built-in programming for the simple shake realization.

Fluke Calibration’s Bath Controllers are among the finest in the world and are easy to install, provides stability of ± 0.003 °C & records tiny resistance change accurately.

molbox1+ or molbox1+S v6.01 Embedded Software (.bin)TITLEVERUSE WITHmolbox1+/molbox1+S™6.012016.12.16molbox1+/molbox1+STITLEVERUSE WITHmolbox1+/molbox1+S™6.012016.12.16molbox1+/molbox1+SThis flash is intended ONLY for molbox1+ or molbox1+S with the Fluke Calibration logo: on the front panel, serial number 2000 and above. Attempted use on any other molbox will result in an inoperable molbox unless the molbox1 hardware is upgraded to a molbox1+.For a molbox1 WITHOUT the Fluke Calibration logo,...

molbox1 v5.41 Embedded Software (.bin)TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

Download COMPASS® for PressureVersion 4 Releases4.2 (2012.07.27)ADDCP-115%4COMPASS for Pressure now supports the calibration functions of CalTool for RPTs. This functionality allows users to fully adjust and report calibration results for supported Fluke products. Sample tests are included with COMPASS that support automated collection of as received data and as left data with an adjustment in between. Review the CalTool for RPTs application note for details. The COMPASS CalTool implementation supports...

Download COMPASS® for PressureVersion 3 Releases3.00.43 (SP1) (2011.02.11)ADDCP-802Support PG7000 and PG9000 models that respond with FLUKE as the manufacturer.CHGCP-793An automated PG7000/PG9000 system with a PPC and AMH will use ATM as the minimum pressure when exercising in a test that is run in Absolute by ATM.3.00.42 (SP1) (2010.07.07)ADDCP-689Support alternate units of measure and temperature references for the Piston Cylinder effective area.ADDCP-775Added new instruments to the default database.CHGCP-786When...

COMPASS for molbox PC Based Software Demo (.exe)COMPASS for molbox PC Based Software Upgrade (.exe)TITLEVERUSE WITHCOMPASS®for molbox™4.062010.10.28TITLEVERUSE WITHCOMPASS®for molbox™4.062010.10.28molbox1, molbox1+, molbox RFMDescriptionThis download file provides 100 hours of fully functioning use of COMPASS for molbox. Licensed users can download this file to upgrade from a previous version of COMPASS for molbox.  SummaryCOMPASS for molbox is a complete flow calibration software package...

COMPASS for Flow PC Based Software (.exe)Additional Downloads:COMPASS for Flow, PC Based Software, Demo (.exe)COMPASS for Flow, PC Based Software, Upgrade (.exe)Patch to use COMPASS for Flow 4.0 with MET/TRACK 7.3 SP1 (.zip)Patch to use COMPASS for Flow 4.0 with MET/TRACK 8.X (.zip)TITLEVERUSE WITHDOCUMENTSCOMPASS®for Flow™5.1.0molbox1, molbox1+, molbox1+S, molbox RFM, MFC-CB, MFC SwitchboxCOMPASS for Flow uses an on line HTML help system that is installed with the program. Install and run COMPASS...

CalTool for RPTs Free Utility (57.61 MB)TITLEVERUSE WITHDOCUMENTSCalTool™ for RPTs Free Utility1.10.0.252021.05.11PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCK, PPCK+, RPM1, RPM3, RPM4, PPCH, PPCH-G, molbox1, molbox RFMCalTool for RPTs uses an on line HTML help system that is installed with the program. Install and run CalTool then select the [Help] menu to access the help system.(Note: As a result of PC specific security settings the help may not display correctly when viewed over the Internet....

9640A-LPNX Firmware Upgrade (.exe)Additional Downloads:9640A-LPN Firmware Upgrade (.exe)9640A Firmware Upgrade (.exe)Documents:96xxx Firmware Release Notes v 3.21 (.doc)9640A RF Reference Source Firmware Upgrade9640A RF Reference Source Firmware UpgradeThere are three different firmware updates available for the 9640A product range. Instruments can only be updated with firmware at the same major firmware version. That is instruments with 1.xx can only have another version of 1.xx installed on it,...

8588A & 8558A Firmware, Update by USB (.zip)TITLEUSE WITH8588A & 8558AAllThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by USBFluke 85xx update v1.32To update a Fluke 8588A/8558AAn empty USB stick (of greater than 10Mbytes) will be required. This should be formatted using...

4322 v1.4.3.27 Embedded Software (.bin)TITLEVERUSE WITH4322v1.4.3.272015.12.014322TITLEVERUSE WITH4322v1.4.3.272015.12.014322Instructions:Download the file by clicking on "4322 v1.4.3.27 Embedded Software".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a standard RS232 cable to the COM1 port of the 4322.The updating of embedded software should only be performed after...

Using a magnifying scope when calibrating liquid-in-glass thermometers can lower your uncertainty by enlarging the thermometer’s scale and providing improved viewing resolution.

Fluke Calibration’s Black Stack thermometer readout is one of the most versatile, cost-effective & accurate readouts in the world. Learn more.

Fluke Calibration’s 1529 Chub-E4 Thermometer gives you four channels, three major sensor types, lab-quality accuracy, and a ton of great features.

The Fluke Calibration 5730A High Performance Multifunction Calibrator is the culmination of years of engineering development, customer research and industrial design, to bring to market the new “gold standard” in electrical multifunction calibration.

The 5725A Amplifier enhances the 5700A and 5720A Multifunction Calibrators in the ac voltage, ac current, and dc current functions.

Use the 1586A Super-DAQ to automate temperature sensor calibration The 1586A Super-DAQ Precision Temperature Scanner provides a unique feature for automating sensor calibration that can greatly increase your lab productivity—without a PC and software. When the Super-DAQ is connected to a Fluke Calibration dry-well or fluid bath, it can control the temperature source to run the calibration automatically. You simply program the number of set-point temperatures and their values, select a scan sequence,...

With ratio accuracy as good as 0.06 ppm (0.000015 °C) the Fluke Calibration Super-Thermometer is sure to become a highly valued instrument in your calibration laboratory. It is an ideal choice for applications that previously required the use of complex and expensive bridges, such as calibrating SPRTs, PRTs, and thermistors.10 reasons to choose the Super Thermometer for your high accuracy temperature measurements.1. Accurate enough for the primary lab, economical enough for the secondary labThe...

The triple point of water (TPW) is the only thermometric fixed point used in definitions of both the thermodynamic temperature and the international temperature scale. It is undoubtedly the most important fixed point in thermometry. Some results from the international comparison of TPW cells undertaken a few years ago found differences among TPW cells as large as 0.1 mK or more. This is why we started working to improve the quality of our TPW cells about four years ago.As we know, impurities in the...

The most accurate and flexible temperature data acquisition system on the market.

The 9144 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

The 9143 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

The 9142 Series Field Metrology Wells extend high performance to the industrial process environment by maximizing portability, speed, and functionality with little compromise to metrology performance.

The 1502A and 1504 reference thermometers will read RTDs, PRDs, and thermistor sensors. Primary temperature standards, secondary temperature standards, fixed-point cells, water triple points, SPRTs, calibration baths, dry-block calibrators and temperature metrology training can also be found on this site.

New stroboscope helps frontline mechanical troubleshooting teams precisely measure machine rotation and oscillation without shutting down the equipment.

With 320x240 resolution and manual focus, the TiS75 produces professional quality images to make it easy to both see and solve the problem.

Record three-phase power quality monitoring for power quality disturbances with the new Fluke 1750 Power Recorder and the Fluke Power Analyze software.

Record three-phase power quality monitoring for power quality disturbances with the new Fluke 1750 Power Recorder and the Fluke Power Analyze software.

AC/DC current module that wirelessly relays measurements from current clamp accessories to other Fluke Connect® enabled master units

A fully functional true-rms current clamp meter that wirelessly relays measurements to other Fluke Connect® enabled master units

If you’ve been using dry-well calibrators for field work, you know there’s a lot more to a dry-well than its temperature range and stability.

How to measure electricity from a safe distance

Vibration testing for condition-based maintenance, to reduce costs and production losses. Mechanics of testing, analyzing roller bearing faults.

Checking your test leads to make sure they are in good condition and rated for the job at hand is the best insurance for accuracy and safety

Fluke News Plus Predictive Maintenance Archive Articles

Fluke Corp. introduces the Fluke® 805 FC Vibration Meter, a portable multifunction vibration screening tool that provides quantifiable information on the bearing and overall health of motors and other rotating equipment, and shares that data in real time via Fluke Connect®. The Fluke 805 FC is ideal for frontline mechanical troubleshooting teams that need reliable and repeatable measurements of rotating equipment to make imperative go/no-go maintenance decisions.

This issue of "Solid Ground" talks about ground fault circuit interrupters (GFCIs), why they are necessary, and how to troubleshoot GFCI-protected circuits.

All mine sites have grounded electrical systems, so that in the event of a lightning strike or utility overvoltage or ground fault, the current would be able to find a safe path to earth or the neutral of the transformer.

In the past, motor repair meant dealing with traditional three-phase motor failures that were largely the result of water, dust, grease, failed bearings, misaligned motor shafts, or just plain old age. But motor repair has changed in a big way with the introduction of electronically controlled motors, more commonly referred to as adjustable speed drives (ASDs).

Early reports from the field suggest that the new Fluke 772 and 773 Milliamp Process Clamp Meters may be game changers, breaking new ground for technicians in the HVAC controls industry. With the feature sets these meters offer, troubleshooting of the most common problems in modern control systems becomes a snap.

Beyond the basics: Have you ever wondered about the efficiency of your fireplace?

Fluke News Plus Research Archive Articles

Limiting workers’ exposure to electrical hazards like arc flash or electrocution is a solid foundation for any electrical safety program. Combine that mindset with the right non-contact tools and more electrical workers will be kept out of harm’s way.

Out on the job site, concrete finishers stand ready to shape wet ready-mix into a new stretch of highway. Mixer trucks are lined up at the concrete batch plant,waiting to take on their loads. But hold on—an electrical problem has shut down the plant. It's time to call Keithly Electric.

Electrical safety requirements for using digital multimeters per OSHA and NFPA 70E

Critical systems run smoothly with regular maintenance and reliable tools Everybody knows that consistent, dependable electrical power is critical to any plant's function. But perhaps even more critical is a reliable uninterruptible power supply (UPS) system. UPS systems are the silent partners that just sit and wait until there's a break in power. At that point, the UPS system is the most important system in the plant. It has to be ready to spring into action in milliseconds to keeps things running for anywhere from seconds to hours.

The formula can be stated in two ways, depending on what you're looking for. It is usually applied to the leading edge of a pulse in a dynamic system and is related to resistor-capacitor filter time constants and settling times.

The importance of investing in the right set of tools to monitor power quality issues, and prevent them in the future, can't be emphasized enough. Fluke offers an extensive range of excellent power meters and other power quality tools for troubleshooting, preventive maintenance, and long-term recording and analysis in industrial applications and utilities.

Air velocity is a key parameter in evaluating airflow system performance. As part of basic testing, adjusting and balancing of HVAC air distribution systems, most HVAC technicians now use an anemometer to measure air velocity at grilles-registers-diffusers, within a duct, or in open spaces.

Scenarios showing how to prevent system failures and downtime caused by HVAC network problems.

In my role as a consultant and trainer, I spend a lot of time working with facility maintenance personnel. Recently I was recently given a formidable task by the maintenance leadership of the plant services shop of a large university.

Part 2: Signal Input and Processing