Fluke 87V/IMSK Industrial Multimeter Service Combo Kit

  • Fluke 87V/IMSK Industrial Multimeter Service Combo Kit | Fluke

Key features

  • Fluke-87V Multimeter with temperature frequency, capacitance 250 µs peak min-max
  • Fluke-i400 AC 400A Current Clamp
  • 80BK-A thermocouple bead probe
  • TL75 test leads
  • AC72 alligator clips
  • Limited lifetime warranty on Fluke-87V and 1-year warranty on accessorie
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 24.25ms
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;
Get a free demo

Product overview

This combo kit is built around the Fluke 87V, the most widely used industrial digital multimeter in the world, and includes special accessories to make you even more productive on the job. This kit will save over 15% compared with the individual price of all the accessories. Plus you'll be working with the most trusted tools in the world.


    Fluke 87V/IMSK Kit
    Fluke 87V/IMSK Industrial Multimeter Service Combo Kit


    • Fluke 87V Industrial Multimeter
    • TL-75 Test Leads
    • AC175 Alligator Clips
    • i400, 400A AC current clamp
    • 80BK-A DMM Temperature Probe
    • 9V battery (installed)


    Fluke 87V Digital Multimeter

    Voltage DCMaximum Voltage1000 V
    Accuracy±(0.05% + 1)
    Maximum Resolution10 µV
    Voltage ACMaximum Voltage1000 V
    Accuracy±(0.7% + 2) True RMS
    AC Bandwidth20 kHz with low pass filter; 3 db @ 1 kHz
    Maximum Resolution0.1 mV
    Current DCMaximum Amps10 A (20 A for 30 seconds maximum)
    Amps Accuracy±(0.2% + 2)
    Maximum Resolution0.01 µA
    Current ACMaximum Amps10 A (20 A for 30 seconds maximum)
    Amps Accuracy±(1.0% + 2) True RMS
    Maximum Resolution0.1 µA
    ResistanceMaximum Resistance50 MΩ
    Accuracy±(0.2% + 1)
    Maximum Resolution0.1 Ω
    CapacitanceMaximum Capacitance9,999 µF
    Accuracy±(1% + 2)
    Maximum Resolution0.01 nF
    FrequencyMaximum Frequency200 kHz
    Accuracy±(0.005% + 1)
    Maximum Resolution0.01 Hz
    Duty CycleMaximum Duty Cycle99.9%
    Accuracy±(0.2% per khz +0.1%)
    Maximum Resolution0.1%
    Temperature Measurement-200.0°C - 1090°C
    -328.0°F - 1994.0°F
    excluding probe
    80 BK Temperature Probe-40.0°C - 260°C
    -40.0°F - 500°F, 2.2°C or 2% whichever is greater
    ConductanceMaximum Conductance60.00 nS
    Accuracy±(1.0% + 10)
    Maximum Resolution0.01 nS
    DiodeRange3 V
    Resolution1 mV
    Accuracy±(2% + 1)
    Duty Cycle RangeAccuracyWithin ±(0.2% per kHz + 0.1%)
    Environmental Specifications
    Operating Temperature-20°C to +55°C
    Storage Temperature-40°C to +60°C
    Humidity (Without Condensation)0% - 90% (0°C - 35°C)
    0% - 70% (35°C - 55°C)
    Operating Altitude2000 m
    Safety Specifications
    Overvoltage categoryEN 61010-1 to 1000 V CAT III, 600V CAT IV
    Agency ApprovalsUL, CSA, TÜV, VDE listed
    Mechanical and General Specifications
    Size201 x 98 x 52 mm (with holster)
    Weight355 g
    624 g - with holster
    DisplayDigital6000 counts updates 4/sec.
    19,999 counts in high-resolution mode
    Analog32 segments, updates 40/sec.
    Frequency19,999 counts, updates 3/sec at > 10 Hz
    Battery LifeAlkaline~400 hours typical, without backlight
    Shock1 Meter drop per IEC 61010-1:2001
    VibrationPer MIL-PRF-28800 for a Class 2 instrument

    Fluke i400 AC Current Clamp

    Nominal current range400 A
    Continuous current range1 A - 400 A
    Maximum non-destructive current1000 A
    Lowest measurable current1 A
    Basic accuracy2% + 0.06 A
    (45-400 Hz)
    (% reading + floorspec)
    Useable frequency5 Hz - 20 kHz
    Output level(s)1 mA/A
    Safety Specifications
    SafetyCAT IV 600 V, CAT III, 1000 V
    Maximum voltage1000 V AC rms from earth to ground, in compliance with EN61010
    Mechanical and General Specifications
    Warranty1 year
    Maximum conductor diameter32 mm (1.25 in)
    Maximum conductor size (busbar)750 MCM
    Output cable length1.5 m (59 in)
    Shrouded banana plugsYes


    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getReviews, 23.6ms
    • bvseo-msg: HTTP status code of 404 was returned;