English

Amprobe AT-6020 Advanced Wire Tracer Kit

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 29.98ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;
  • Amprobe AT-6020 Advanced Wire Tracer Kit
  • Amprobe AT-6020 Advanced Wire Tracer Kit
  • Amprobe AT-6020 Advanced Wire Tracer Kit
  • Amprobe AT-6020 Advanced Wire Tracer Kit
  • Amprobe AT-6020 Advanced Wire Tracer Kit

Key features

  • Identify breakers and fuses, as well as the location of a break, open or short
  • Non-contact voltage detection utilizes passive tracing without the transmitter to verify if a wire is energized
  • Compatible with the optional CT-400 Signal Clamp accessory for inducing a tracing signal on the cable when there is no access to bare conductors

Product overview: Amprobe AT-6020 Advanced Wire Tracer Kit

A Receiver and powerful Transmitter are combined in this kit, designed to locate energized and de-energized wires, breakers, and fuses without having to disconnect any equipment. The Receiver features four tracing modes optimized for a range of applications. Its fully automatic breaker tracing capability saves time and eliminates the confusion of multiple false positives by detecting the highest recorded signal in a breaker or fuse. The Transmitter utilizes two optimized frequencies that allows for a clean and reliable signal. The optional Signal Clamp accessory can be used in applications where there is no access to bare conductors by enabling the Transmitter to induce a signal into a wire through insulation. Whether you’re a novice user or an expert, the AT-6020 Amprobe Advanced Wire Tracer kit will help you get the job done fast.

Product Highlights

  • Traces wires in walls, ceilings, floors and corners
  • Locates breakers and fuses
  • Pinpoints shorts and opens
  • High resolution 2.5″ TFT LCD color display
  • Three Transmitter signal modes: “High Signal” mode for normal circuits, “Low Signal” mode for precision tracing in difficult areasand “Loop” mode for closed loop de-energized circuits
  • Four Receiver tracing modes: “Quick Scan” mode allows for quick wire detection at a longer distance, “Precision” mode precisely pinpoints wires or faults located behind walls, floors, or ceilings, “Breaker Identification” mode facilitates quick and easy breaker locating and “Non-Contact Voltage Detection” mode utilizes passive tracing without the Transmitter to verify if a wire is energized
  • Two automatically selected frequency modes for reliable tracing on energized and de-energized circuits
  • Comes with custom Amprobe hard carrying case, test leads and accessories

Specifications: Amprobe AT-6020 Advanced Wire Tracer Kit

 AT-6000-R ReceiverAT-6000-T TransmitterCT-400 Signal Clamp
Measurement CategoryCAT III 600 VCAT III 600 VCAT IV 600 V, CAT III 1000 V
Operating voltage0 to 600 V AC/DC0 to 600 V AC/DC0 to 1000 V AC
Operating frequencyEnergized: 6.25 kHz
De-Energized: 32.768 kHz
Energized: 6.25 kHz
De-Energized: 32.768 kHz
Wire tracing: 32.768 kHz
AC current measurement: 45 Hz to 400 Hz
Hazardous voltage detectionSee NCV detection> 30 V AC/DCN/A
Signal indicationsNumeric, bar graph display and audible beepLEDs and audible beepN/A
Response timeTip Sensor (energized/de-energized): 500 MS
NCV: 500 MS
Battery voltage monitoring: 5 sec
Line voltage monitoring: 1 sec
Battery voltage monitoring: 5 sec
Instantaneous
Current output of signal (typical)N/AEnergized circuit:
HI mode: 60 mA RMS
LO mode: 30 mA RMS
De-energized circuit:
HI mode: 130 mA RMS
LO mode: 40 mA RMS
Loop mode: 160 mA RMS
1 mA/A for AC current measurement with multimeter
Signal voltage output (nominal)N/ADe-energized circuit:
LOW: 29 V RMS, 120 Vp-p
HIGH: 33V RMS, 140 Vp-p
With CT-400:
loop model: 31 V RMS, 120 Vp-p
De-energized circuit:
2.4 V RMS, 24 Vp-p
Range detection (open air)Tip sensor (Energized):
Max distance via air: up to 20 ft (6.1 m)
Pinpointing: approx. 1.97 in (5 cm)
Tip sensor (De-energized):
Max distance via air: up to 14.7 ft (4.5 m)
Pinpointing: approx. 1.97 in (5 cm)
NCV detection (40 to 400 Hz):
Max. sensitivity: 90 V up to 6.56 ft (2 m)
Min. sensitivity: 600 V up to 0.39 in (1 cm)
N/AN/A

Models: Amprobe AT-6020 Advanced Wire Tracer Kit

Amprobe AT-6020 Advanced Wire Tracer Kit

Includes:

  • AT-6000-R Receiver
  • AT-6000-T Transmitter
  • TL-6000 Test lead and accessory kit*
  • CC-6000 Soft carrying case
  • 12 x 1.5 V AA (IEC LR6) batteries
  • User Manual and Quick Reference Guide

* TL-6000 test lead and accessory kit includes:

  • 2 x 1 m test leads (red, black
  • 1 x 7 m test lead (green
  • 2 x alligator clips (red, black
  • 1 x US Socket adapter

Reviews: Amprobe AT-6020 Advanced Wire Tracer Kit

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 26.87ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;