Yuenglings toolbox

04-27-2017

What's in your toolbox? Yuengling Tampa Brewery

Fluke toolUses
Fluke thermal imagerDetecting possible problems in motors and mechanical equipment (such as an overheated motor on a spent grain pump).
Fluke 810 Vibration TesterIdentigying bearing problems in rotation equipment, such as blower motors and pumps.
Investigating possible problems detected with the thermal imager.
Fluke 1735 Three-Phase Power LoggerComparing current draw against rotational speed and output pressure on positive displacement pumps to help verify bearing problems detected with a Fluke 810 Vibration Tester.
Fluke 9040 Phase Rotatio IndicatorVerifying correct connections in three-phase systems.
Fluke 744 Documenting Process CalibratorVerifying the performace of temperature and pressure measurement instruments.
Viewing and changing device parameters in HART-compatible instruments.
Fluke 707 Loop CalibratorVerifying that analog PLC cards are reading signals and working properly.
Fluke 700PTP-1 Pneumatic Test PumpDelivering air at known pressure to calibrate instruments and sensors.
Fluke 322 Clamp MeterChecking current draw and power consumption.
Fluke 771 Milliamp Process Clamp MeterChecking instrument and control signals without breaking the circuit or interrupting the process.
Fluke i3000s Flex AC Current ClampMeasuring currents of up to 1,500 amps through any leg of a substation.
Fluke Networks test toolsTesting and repairing the Ethernet network that links 60 programmable logic controllers (PLCs) in the brewery.