Fluke 28 II Rugged Digital Multimeter

Fluke 28 II Rugged Digital Multimeter is rated 4.7 out of 5 by 10.
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 30.58ms
  • Fluke 28 II Rugged Digital Multimeter
  • Fluke 28 II Rugged Digital Multimeter with leads, clips, temperature probe
  • Fluke 28 II Rugged Digital Multimeter is waterproof and dustproof

Key features

  • IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
  • Designed to withstand 3 meter drop (with holster)
  • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
  • MSHA approval
  • Limited lifetime warranty

Product overview: Fluke 28 II Rugged Digital Multimeter

The standard for rugged

The Fluke 28 II digital multimeter defines the standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. The meter offers an IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95% humidity, and has been designed and tested to withstand a 3 m (10 ft) drop. The Fluke 28 II Rigged Digital Multimeter is built to work in the toughest environments.

Other key capabilities

  • Measure up to 1000 V AC and DC
  • Measure up to 10 A (20 A for 30 seconds)
  • 10,000 μF capacitance range
  • Frequency to 200 kHz
  • Extended AC voltage bandwidth– 15 Hz to 20 kHz
  • Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
  • Resistance, continuity and diode test
  • Min/Max and average recording to capture variations automatically
  • Peak min-max
  • Hi resolution 20,000 count display mode
  • True-rms ac voltage and current for accurate measurements on non linear signals
  • Backlit keypad buttons allow for easy visibility in low-lit areas
  • Large display digits and 2 level bright white backlight for increased visibility
  • Reversible holster for added protection when not in use
  • Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
  • Long battery life (800 hours)
  • Relative mode to remove test lead resistance from low ohms measurements
  • Auto and manual ranging for maximum flexibility
  • Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks

Specifications: Fluke 28 II Rugged Digital Multimeter

Accuracy Specifications
DC voltageRange0.1 mV to 1000 V
Accuracy0.05% + 1
AC voltageRange0.1 mV to 1000 V
Accuracy0.7% + 4
DC currentRange0.1 μA to 10 A
Accuracy0.2% + 4
AC currentRange0.1 μA to 10 A
Accuracy1.0% + 2
ResistanceRange0.1 Ω to 50 MΩ
Display counts6000
Capacitance1 nF to 9999 μF
Frequency0.5 Hz to 199.99 kHz
Temperature-200°C to +1090°C
Low pass filter (Measurement on VSD’s)Yes
ComplianceCAT IV 600 V , CAT III 1000 V
IP ratingIP 67
PowerThree AA batteries
Battery life800 hours
General Specifications
DisplayBar graph/backlightYes/Yes
Data storagePeak transient capture250 μS
Reading holdYes
Other featuresRelative readings (zero)Yes
Battery typeThree AA batteries
Warranty and protectionSafety ratingCAT IV 600 V/CAT III 1000 V
Mine safetyMSHA Approved
External protectionRubber holster
Drop test10 feet drop test
Dustproof/waterproofYes, IP 67 rated
WarrantyLimited lifetime
Size (H x W x L) with holster6.35 x 10.0 x 19.81 cm (2.5 x 3.93 x 7.8 in)
Weight with holster698.5 g (1.54 lb)

Models: Fluke 28 II Rugged Digital Multimeter

Fluke 28 II
Fluke 28 II Rugged Digital Multimeter
Buy it
  • TL75 test leads
  • AC175 alligator clips
  • 80BK-A type-K thermocouple leads

Reviews: Fluke 28 II Rugged Digital Multimeter

Rated 5 out of 5 by from solid meter in more ways that one Finally took the plunge and bought a Fluke... very glad I did. Never going back to the cheap $20 ones that are unreliable and tend to break with any abuse. I was leaning towards the 87V, but ended up buying this one instead as it is built like a TANK. I work in the industrial water industry so the added protection sealed the deal for me. Accuracy, features, longevity... all things you expect from a Fluke are demonstrated here. Great product.
Date published: 2016-12-07
Rated 5 out of 5 by from Great and incredibly tough. I have owned it for about a year. And I have had other name brands. This one is reliable good on batteries. Has a incredible bright display. Use it almost daily l.
Date published: 2016-12-07
  • y_2020, m_12, d_3, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_2, bvpage2n
  • co_hasreviews, tv_0, tr_10
  • loc_en_US, sid_fluke-28-ii, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 25.18ms