Search results

Durable EVA foam case with pockets to safely carry most smaller multimeters and accessories

Check ground fault, insulation of wires, voltage and duty cycle all in one adapter.

Designed to test function and safety of EV charging stations mode 3 for AC charging.

Test lead accessory kit speifically for wire and circuit tracing and troubleshooting applications.

Versatile, three-phase Fluke Connect-compatible power loggers for conducting energy, load and power quality studies.

Fluke 440mA 1000V Fuse Replacement

Trusted cable, network, and Wi-Fi testing made easy.

A40 / A40A current shunt from Fluke Calibration enables ac / dc current transfer measurements & operates in the frequency range of 5Hz to 100Khz. Get a quote.

The Fluke Calibration 2700G series provides accurate pressure measurements up to 0.02% of full scale with an easy-to-use interface and rugged design.

In the unlikely event that you experience corrupt data when using MET/CAL® Plus calibration management software, we may be able to help.

MET/TEAM™ is calibration management software or test equipment asset management software for managing your assets & is powerful, flexible & scalable. By Fluke Calibration.

MET/CAL is the complete solution for automating and managing your calibration workload more efficiently & consistently.

MS-PSWD is a service that MET/CAL, MET/TEAM, or 5500/CAL customers can purchase to get their systems password reestablished.

Optimize Solar Performance: PVA-1500HE2 PV Analyzer & 1537 Insulation Tester 2500V

Powerful high-performance features make troubleshooting fast and easy

Fluke Calibration standard 1 resistors with traceable AC and DC calibrations, that feature long-term stability better than 2 ppm/year.

Connect the instrument to an available RS-232 port and start the IO Toolkit software.

COMPASS® for Pressure Calibration Software is a universal platform for all of your pressure calibration software needs.

Integrate MET/CAL® Calibration Management Software to your workflow with MET/CONNECT™ Calibration Integration Software. Flexibility achieved.

These pneumatic high-pressure controllers calibrate a wide workload of pressure sensors, covering 2X the pressure ranges at 2X the speed of other controllers.

525B temperature/pressure calibrator is the most accurate Fluke Calibration temperature calibrator & also provides high accuracy for pressure calibration.

Loop Calibration - The new Fluke 707 Loop Calibrator is a cost-effective, integrated solution for calibration, repair and maintenance of current loops.

Optimize Solar Performance: PVA-1500HE2 PV Analyzer, 1587 FC Insulation Multimeter, 393 FC Clamp Meter & 87V Multimeter

Fluke CNX 3000 Wireless Test Tools show real-time measurements from remote modules up to 20 meters away. Simultaneous readings on a single screen.

A complete wireless measurement system that lets you make primary measurements on your multimeter while simultaneously viewing True RMS AC current measurements from the remote flexible AC current module.

Optimize Solar Performance: PVA-1500HE2 PV Analyzer, 393 FC Clamp Meter & 87V Multimeter

Fluke CNX 3000 Wireless Test Tools show real-time measurements from remote modules up to 20 meters away. Simultaneous readings on a single screen.

8-piece kit has the most popular screwdrivers, pliers and cutters.

The Fluke 64 MAX thermometer has the precision you need to do your job accurately and will not break the budget.

Hot Fix: MET/CAL version 11.1.0 Hot Fix 3 (.zip)Hot Fix: MET/CAL version 11.1.0 Hot Fix 3 Read Me (.pdf)Current MET/CAL Customers:The MET/CAL 11.1.0 Hot Fix 3 release is an update to previous MET/CAL software. This update includes bug fixes. It also includes the fixes from the previous Hot Fixes.This download does not include an installer. The included files must be manually copied to the appropriate locations on your MET/CAL workstations.Do not uninstall MET/CAL 11.1.0.Follow the instructions in...

EVERETT, Wash., Sept. 17, 2019 – Fluke introduces its newest, most compact laser distance meter yet—the 417D Laser Distance Meter. The 417D speeds up layouts with instant, one-button measurements up to 131 feet (40 meters) and an accuracy of 0.08 inches (± 2 mm). This ultra-portable meter increases measurement efficiency while maximizing the reliability of measurements by reducing estimation errors, saving time and money.Designed for indoor and outdoor applications, the palm-sized 417D features...

11/15/24 - reindex - LF

Update: MET/CAL version 11.0.2 for MET/TEAM version 3.3.1 (.zip)MET/CAL 11.0.2 Read Me (.pdf)Current MET/CAL Accuracy Files (.zip)Default Comm Settings File (Place in Shared Directory) (.zip) document.getElementsByClassName("field-caption-wrapper")[0].innerHTML = "MET/CAL version 11.0.2 for MET/TEAM version 3.3.1 (1.6 GB)"; This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers:MET/CAL version 11.0.2 release is an update...

DH Instruments pressure and flow calibration is part of Fluke CalibrationDH Instruments (DHI) was founded in 1980 with one objective: to provide superior calibration solutions through innovative technology, first rate service, and uncompromisingly metrological integrity.  Now, under the Fluke Calibration name, those values and the DH Instrument commitment to excellence remain the same.DH Instruments customers include metrologists, engineers, technicians, researchers, and quality professionals worldwide...

Pressurements pressure calibration is part of Fluke CalibrationPressurements pressure calibration products, originally from Pressurements, Ltd in the United Kingdom, include a comprehensive series of instruments for the accurate measurement of pressure. Versatile, easy to use, and extremely accurate, these instruments include hydraulic deadweight testers and combined pressure and vacuum deadweight testers. In addition, Pressurements comparison test pumps are also now manufactured and sold through...

Hart Scientific temperature calibration is part of Fluke CalibrationHart Scientific has been a member of the metrology community for over 30 years. Now, under the Fluke Calibration name, it continues to be a leading manufacturer of temperature calibration and measurement equipment. Our experience in temperature calibration goes back 30 plus years and, as Fluke Calibration, we will still be here 30 years from now.Our customers include metrologists, engineers, technicians, researchers, and quality...

Ruska pressure calibration is part of Fluke CalibrationRuska has been a leading global manufacturer of pressure calibration instrumentation since 1944. Now, as part of Fluke Calibration, Ruska continues to offer highly accurate primary pressure standards, transfer standards, and air data test sets. Every Ruska instrument undergoes a battery of tests to make sure it meets or exceeds its performance parameters. An accredited calibration report comes with every instrument.How Ruska products fit within...

Update: MET/CAL version 11.0.2 for MET/TEAM version 3.3.1 (.zip)MET/CAL 11.0.2 Read Me (.pdf)Current MET/CAL Accuracy Files (.zip)Default Comm Settings File (Place in Shared Directory) (.zip) This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available here.Current MET/CONNECT Customers:MET/CAL version 11.0.2 release is an update to previous MET/CAL software. This update includes bug fixes.Do not manually uninstall the previous version. If you do this before attempting...

Hot Fix: MET/CAL version 11.0.2 Hot Fix 2 (.zip)Hot Fix: MET/CAL version 11.0.2 Hot Fix 2 Read Me(.pdf)Current MET/CAL Customers:The MET/CAL 11.0.2 Hot Fix 2 release is an update to previous MET/CAL software. This update includes a bug fix for legacy calibrator FSCs. It also includes the fix from the previous Hot Fix.This download does not include an installer. The included files must be manually copied to the appropriate locations on your MET/CAL workstations.Do not uninstall MET/CAL 11.0.2.Follow...

Download MET/CAL version 11.0.2 Hot Fix (.zip)Download MET/CAL version 11.0.2 ReadMe (.pdf)Current MET/CAL Customers:The MET/CAL 11.0.2 Hot Fix release is an update to previous MET/CAL software. This update includes a bug fix for the 5540A/5550A/5560A FSCs.This download does not include an installer. The included files must be manually copied to the appropriate locations on your MET/CAL workstations.Do not uninstall MET/CAL 11.0.2.Follow the instructions in the MET/CAL 11.0.2 Hot Fix readme file...

Document(s): MET/CAL 11.0.3 Read Me (446.33 KB)MET/CAL Accuracy Files (1018.22 KB)MET/CAL version 11.0.3 User Guide (21.43 MB)MET/CAL version 11.0.3 Reference Guide (21.45 MB)MET/CAL v11.0.3 for MET/CONNECT v2.1.1This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available here.Current MET/CONNECT Customers:MET/CAL version 11.0.3 release is an update to previous MET/CAL software. This update includes critical bug fixes.Refer to the Readme for important information...

Document(s): MET/CAL 11.0.3 Read Me (446.33 KB)MET/CAL Accuracy Files (1018.22 KB)MET/CAL version 11.0.3 User Guide (21.43 MB)MET/CAL version 11.0.3 Reference Guide (21.45 MB)MET/CAL v11.0.3 for MET/TEAM v3.3.1This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers:MET/CAL version 11.0.3 release is an update to previous MET/CAL software. This update includes critical bug fixes.Do not manually uninstall the previous version....

MET/CAL v11.0.1 (for MET/CONNECT v2.1.1) (1.6 GB)Document(s): MET/CAL 11.0.1 Read Me (419.71 KB)This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available here.Current MET/CONNECT Customers:MET/CAL version 11.0.1 release is an update to previous MET/CAL software. This update includes bug fixes.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL...

MET/TEAM 3.3.1 Hot Fix 2 (1.16 MB)Document(s): MET/TEAM 3.3.1 HotFix 2 Readme (142.25 KB)Current MET/TEAM Customers:The MET/TEAM 3.3.1 Hot Fix 2 release is an update to previous MET/TEAM software. This update includes a fix for an issue with MET/TEAM Mobile Check-in.This download does not include an installer. The included files must be manually copied to the appropriate locations on your MET/TEAM server.Do not uninstall MET/TEAM 3.3.1.Follow the instructions in the MET/TEAM 3.3.1 Hot Fix 2 readme...

Hi, this is Jeff Grossman, Sales Engineer for Fluke Calibration’s pressure and mass flow calibration solutions, here to provide you with a demonstration of one of our three modular pressure controllers. I happen to have here the 8270A which has a maximum pressure of 6000 psi complemented by the 6270A maximum pressure of 3000 psi and the 8370A with maximum pressure of 15,000 psi. The nice thing is they share a lot of commonality which makes them easy to switch between and easy to use.Very small...

Annual global event highlights why measurement matters in everyday lifeEverett, Wash., May 20, 2013 – On May 20th, scientists and organizations dedicated to metrology celebrate World Metrology Day, which commemorates the signing of the international treaty to coordinate weights and measures activities and support the development of the metric system. Fluke Corporation recognizes World Metrology Day as a time to appreciate the scientists in national laboratories throughout the world who dedicate...

PG7000/PG9000 Ver 3.1.5.255 Embedded Software (.bin)TITLEVERUSE WITHPG7000™PG9000™3.1.5.255All PG7000 models with SN 733 or newer. All PG9000 models.TITLEVERUSE WITHPG7000™PG9000™3.1.5.255All PG7000 models with SN 733 or newer. All PG9000 models.Instructions:The PG7000/PG9000 firmware versions 3.00 and newer are intended to work with all PG9000 models and PG7000 models with serial numbers 733 or newer. Do not attempt to upgrade an older PG7000 model with this software. This upgrade does not...

PG7000 Ver 2.01 Embedded Software (.bin)TITLEVERUSE WITHPG7000™2.01PG7102, PG7302 or PG7601Instructions:TITLEVERUSE WITHPG7000™2.01PG7102, PG7302 or PG7601Instructions:-Ver 2.00 UsersYour PG7000™ time and date will not operate with Ver 2.01 until a hardware change is implemented.-Ver 1.0x UsersVer 2.01 is a major revision which should be accompanied by hardware changes. Contact a Fluke Calibration Authorized Service Center for additional information.Download the file. Run Winflash and select...

PPC4E v1.2.6.15 Embedded Software (.bin)TITLEVERUSE WITHPPC4E™1.2.6.15PPC4EInstructions:Download the file by clicking on "PPC4E v1.2.6.15.bin".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it...

PPC4 v1.2.6.14 Embedded Software (.bin)TITLEVERUSE WITHPPC4™1.2.6.14PPC4 (including -AF models)Instructions:Download the file by clicking on "PPC4 v1.2.6.14.bin".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

PPC2-AF v1.01e Embedded Software (.bin)TITLEVERUSE WITHPPC3™1.03d2011.10.21PPC3 (including -AF models)Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should only be performed after...

Fluke DAQ Software (.zip)Discontinued ProductThis product has been discontinued. The download is still available for existing users to download for installation as necessary.DescriptionFluke DAQ 6.0.4 application software for use with Fluke data acquisition and temperature scanning products (2638A, 1586A, 2640A, 2645A, 2680A, 2686A). Version 6.04 is an update to Version 6.03.Evaluation Mode:Without an activation key this program will run for 40-hours of cumulative run-time in Evaluation (DEMO) mode....

MET/TEMP II Software Download (.exe)TITLEVERLinksMET/TEMP II5.2Product PageDescriptionWhen downloaded, this file can be run to install MET/TEMP II. There is no free demo/trial version of 5.2. In order to install MET/TEMP II v5.2, you must purchase the software and obtain a serial number. The installation process prompts you to enter the serial number. Version 5.2 does not accept serial numbers from previous versions of MET/TEMP II. The serial number will be located on a sticker on the CD pouch....

COMPASS for Pressure Basic (.exe)Additional Downloads:COMPASS for Pressure Basic, Demo (.exe)COMPASS for Pressure Basic, Upgrade (.exe)COMPASS for Pressure Enhanced (.exe)COMPASS for Pressure Enhanced, Demo (.exe)COMPASS for Pressure Enhanced, Upgrade (.exe)TITLEVERUSE WITHDOCUMENTSCOMPASS®for Pressure™5.2.102024.05.21FPG8601, PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCH, PPCK, PPCK+, RPM3, RPM4, 7050, 7052, 7250, 7252, 7350, 7615, 7750, 7010, 7215, 2465, 2456, 2271A, 6270A, 8270A, 8370A,Third...

Update: MET/CAL version 10.4.0 for MET/TEAM version 3.0.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available with the MET/CONNECT 2.0.0 installer.Current MET/TEAM Customers:MET/CAL version 10.4.0 release is an update to previous MET/CAL software. This update includes new features, bug fixes, and minor updates.You must install MET/TEAM version 3.0.0 Hot Fix 2 to use MET/CAL 10.4.0.Do not manually uninstall the previous version. If you do this...

Update: MET/CAL version 10.6.1 for MET/TEAM version 3.2.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers:MET/CAL version 10.6.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor changes.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime...

Update: MET/CAL version 10.6.1 for MET/CONNECT version 2.1.0 (.zip)This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available here.Current MET/CONNECT Customers:MET/CAL version 10.6.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor changes.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime...

Update: MET/CAL version 10.5.1 for MET/TEAM version 3.1.1 or 3.1.0 (.zip)This update is not for MET/CONNECT Customers. Current MET/TEAM Customers:MET/CAL version 10.5.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor changes.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime and/or MET/CAL Editor on any workstations, be...

Update: MET/CAL version 10.5.0 for MET/CONNECT version 2.0.0 (.zip)This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available with the MET/TEAM 3.1.0 installer.Current MET/CONNECT Customers:MET/CAL version 10.5.0 release is an update to previous MET/CAL software. This update includes new features, bug fixes, and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and...

Update: MET/CAL version 10.2.2 for MET/TEAM version 3.0.0 (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available with the MET/CONNECT 1.2.0 installer.Current MET/TEAM Customers:MET/CAL version 10.2.2 release is an update to previous MET/CAL software. This update includes bug fixes and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you...

Hot Fix: MET/CAL version 10.2.2 Hot Fix (.zip)Documents:MET/CAL version 10.2.2 Hot Fix Readme (.pdf)This hot fix applies to both MET/TEAM and MET/CONNECT versions of MET/CAL.Current MET/CAL Customers:The MET/CAL 10.2.2 Hot Fix release is an update to previous MET/CAL software. This update includes bug fixes only.This download does not include an installer. The included files must be manually copied to the appropriate locations on each MET/CAL Client PC.Do not uninstall MET/CAL 10.2.2.Follow the instructions...

molbox RFM™ v1.20d Embedded Software (.bin)TITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMTITLEVERUSE WITHmolbox RFM™1.20d2011.10.17molbox RFMInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of...

IO Toolkit v1.0 (.exe)IO Toolkit (Model 9940)IO Toolkit v1.0Posted: 09/26/2008Description: The IO Toolkit is shipped with supported instruments. This version includes support for the new 1523 and 1524 series Readouts.This software is free and does not require a serial number to be installed.Size: 7.0MB

6270A Embedded Software, Update by USB (.zip)Additional Downloads:6270 PCM v104 USB (.zip)Click here to update by serial RS-232 port.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 6270AUpdating the PCM (Pressure...

6270A Embedded Software, Update by Serial RS-232 Port (.zip)Click here to update by USB.TITLEUSE WITH6270A6270AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the RS-232 serial port on the rear panel of the 6270AThe below procedure updates the main firmware. Updating...

molbox1 v5.41 Embedded Software (.bin)TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1TITLEVERUSE WITHmolbox1™5.412016.12.16molbox1Instructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

Hot Fix: MET/TEAM version 2.3.0 Hot Fix 2 (.zip)This Hot Fix is to resolve an issue that causes failures to save MET/CAL results data when using Windows Authentication. If you do not use Windows Authentication, this is not a necessary update.Current MET/TEAM Customers:The MET/TEAM 2.3.0 Hot Fix 2 release is an update to previous MET/TEAM software. This update includes bug fixes only.This download does not include an installer. The included files must be manually copied to the appropriate locations...

Interface-it v3.81 (.exe)Interface-it Temperature Calibration SoftwarePosted: 11/27/2007Description: This version includes drivers for the new 914x series Field Metrology Wells as well as 917x series Metrology Wells.Size: 2.2MB** INTERFACE-IT MAY NOT BE FULLY COMPATIBLE WITH WINDOWS® VISTA  & WINDOWS® 7 **Fluke Calibrations's Interface-it Software Version 3.81 allows nearly all our dry-wells, baths and controllers that are equipped with an RS-232 interface to be controlled remotely from a...

CalTool for RPTs Free Utility (57.61 MB)TITLEVERUSE WITHDOCUMENTSCalTool™ for RPTs Free Utility1.10.0.252021.05.11PG7000, PPC2, PPC2+, PPC2 AF, PPC3, PPC4, PPCK, PPCK+, RPM1, RPM3, RPM4, PPCH, PPCH-G, molbox1, molbox RFMCalTool for RPTs uses an on line HTML help system that is installed with the program. Install and run CalTool then select the [Help] menu to access the help system.(Note: As a result of PC specific security settings the help may not display correctly when viewed over the Internet....

Download COMPASS® for PressureVersion 3 Releases3.00.43 (SP1) (2011.02.11)ADDCP-802Support PG7000 and PG9000 models that respond with FLUKE as the manufacturer.CHGCP-793An automated PG7000/PG9000 system with a PPC and AMH will use ATM as the minimum pressure when exercising in a test that is run in Absolute by ATM.3.00.42 (SP1) (2010.07.07)ADDCP-689Support alternate units of measure and temperature references for the Piston Cylinder effective area.ADDCP-775Added new instruments to the default database.CHGCP-786When...

Hot Fix: MET/TEAM version 3.0.0 Hot Fix 2 (.zip)Documents:MET/TEAM version 3.0.0 Hot Fix 2 Readme (.pdf)Current MET/TEAM Customers:The MET/TEAM 3.0.0 Hot Fix 2 release is an update to previous MET/TEAM software. This update includes bug fixes only. It includes all items resolved in the first MET/TEAM 3.0.0 Hot Fix.After installing this Hot Fix, you must install MET/CAL version 10.4.0. This Hot Fix is not compatible with MET/CAL version 10.2.xThis download does not include an installer. The included...

Hot Fix: MET/TEAM version 3.0.0 Hot Fix (.zip)Documents:MET/TEAM version 3.0.0 Hot Fix Readme (.pdf)Current MET/TEAM Customers:The MET/TEAM 3.0.0 Hot Fix release is an update to previous MET/TEAM software. This update includes bug fixes only.This download does not include an installer. The included files must be manually copied to the appropriate locations on your MET/TEAM server.Do not uninstall MET/TEAM 3.0.0.Follow the instructions in the MET/TEAM 3.0.0 Hot Fix readme file to install this update.New...

6003A Firmware Update (.zip)TITLEUSE WITH6003AAllThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by USBInstallationPut the CD into the computer, wait for autorun and select “Software installation” and “Uploader” or start direct “install\freeware\uploader”.Uninstall...

4322 v1.4.3.27 Embedded Software (.bin)TITLEVERUSE WITH4322v1.4.3.272015.12.014322TITLEVERUSE WITH4322v1.4.3.272015.12.014322Instructions:Download the file by clicking on "4322 v1.4.3.27 Embedded Software".Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a standard RS232 cable to the COM1 port of the 4322.The updating of embedded software should only be performed after...

2271A Embedded Software, Update by USB (zip)TITLEUSE WITH2271A2271AThe updating of embedded software should only be performed after given specific instructions to do so from Technical Support or a Fluke Calibration Authorized Service Center.If the update isn't performed properly, your product may be inoperable until it is.Instructions to update by the USB port on the rear panel of the 2271ABegin by clicking on the Get software button. Then download the zip file by clicking the 2271A v10x USB.zip...

FlukeView® Forms Demo/Reader Software Downloads (.exe)You can download the free Demo/Reader version of FlukeView® Forms from this page. It allows you to open any FlukeView® Forms file and view or edit data that has been saved by a FlukeView® Forms user. It also allows you to see how data can be displayed, formatted, printed and saved in FlukeView® Forms.This demonstration software does not include the FlukeView® Forms Designer, which allows you to customize your forms.System Requirements for...

Hot Fix: MET/TEAM version 3.2.0 Hot Fix (.zip)Documents:MET/TEAM version 3.2.0 Hot Fix Readme (.pdf)Current MET/TEAM Customers:The MET/TEAM 3.2.0 Hot Fix release is an update to previous MET/TEAM software. This update includes security fixes only.This download does not include an installer. The included files must be manually copied to the appropriate locations on your MET/TEAM server.Do not uninstall MET/TEAM 3.2.0.Follow the instructions in the MET/TEAM 3.0.0 Hot Fix readme file to install this...

MFC-CB v1.00b Embedded Software (.bin)TITLEVERUSE WITHMFC-CB™1.00b2005.10.19MFC-CBTITLEVERUSE WITHMFC-CB™1.00b2005.10.19MFC-CBInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.The updating of embedded software should...

PG7000 Ver 2.07h Embedded Software (.bin)TITLEVERUSE WITHPG7000™2.07hAll PG7000 Series modelsInstructions:-Ver 2.02x and 2.03x Users You can upgrade directly to this version with no special considerations.-Ver 2.01x UsersVer 2.02 is a major revision which should be accompanied by hardware changes.-Ver 1.0x UsersVer 2.01 is a major revision which should be accompanied by hardware changes. Contact a Fluke Calibration Authorized Service Center for additional information.Download the file. Run Winflash and...

IR Configuration Utility v1.0 (.exe)IR Configuration Utility v1.0Posted: 01/23/2009Description: The IR Configuration Utility is shipped with supported instruments. Supported instruments include the 4180 and 4181 Precision IR Calibrators.This software is free and does not require a serial number to be installed.Size: 13.9MB

PPC2-AF v1.01e Embedded Software (222.5 KB)TITLEVERUSE WITHPPC2-AF™1.01e2006.11.17PPC2-AFTITLEVERUSE WITHPPC2-AF™1.01e2006.11.17PPC2-AFInstructions:Do Not use with PPC2+!This software revision affects only the PPC2-AF on-board routines for calibration of the PPC2-AF's RPTs. It has no effect on regular operation. This new release is recommended for all PPC2-AF units, in particular those on which difficulty with calibration of the Lo Reference Pressure Transducer has been encountered. The FCAL...

Update: MET/CAL version 10.6.2 for MET/TEAM version 3.2.0 (.zip)Documents:Accuracy Files for Fluke 5540A, 5550A, and 5560A (.zip)This update is not for MET/CONNECT Customers. The MET/CONNECT version of this release is available here.Current MET/TEAM Customers:MET/CAL version 10.6.2 release is an update to previous MET/CAL software. This update includes new Instrument FSCs for the Fluke 5560A, 5550A, and 5540A calibrators and bug fixes.Do not manually uninstall the previous version. If you do this...

Update: MET/CAL version 10.6.2 for MET/CONNECT version 2.1.0 (.zip)Documents:Accuracy Files for Fluke 5540A, 5550A, and 5560A (.zip)This update is not for MET/TEAM Customers. The MET/TEAM version of this release is available here.Current MET/CONNECT Customers:MET/CAL version 10.6.2 release is an update to previous MET/CAL software. This update includes new Instrument FSCs for the Fluke 5560A, 5550A, and 5540A calibrators and bug fixes.Do not manually uninstall the previous version. If you do this...

RPM3 v1.02j Embedded Software (.bin)TITLEVERUSE WITHRPM3™1.02j2005.06.27RPM3Instructions:Do Not use with HGC-30000-AF!Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires...

RPM4-AD v1.00f Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4-AD™1.00f2010.12.28RPM4-ADDo NOT use with NON "-AD" (Air Data)RPM4 ModelsInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an...

RPM4 v1.01I Embedded Software (.bin)TITLEVERUSE WITHNOT FOR USE WITHRPM4™1.01I2019.04.28RPM4Note: If you have a special RPM4model use these links:RPM4-AD™RPM4-AF™RPM4-E-DWT A70M/A7M-AF™RPM4-E-DWT™Please contact our Calibration and Repair department at 602.773.4782 if you recently upgraded to version 1.01f or plan to upgrade from 1.01f to another version. The upgrade path from 1.01f may cause a potentially significant metrological error.Instructions:Download the file.Run Winflash and select...

RPM4-E-DWT v1.00c Embedded Software (.bin)TITLEVERUSE WITHE-DWT1.00c2014.08.06RPM4-E-DWTInstructions:Download the file.Run Winflash and select the file downloaded as the file to write to the product.Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.If your product has an model number ending in "-AF", it requires specific "-AF" embedded...

TableWare v2.4 Working Demo (.exe)TableWare v2.4 Working DemoPosted: 09/29/2005Description: The TableWare Working Demo does everything the actual software does, except actually calculate coefficients from raw data. The coefficients used by the working demo are generic and serve only to demonstrate the capabilities of the software.Serial Number to Install Demo Version: DEMOSize: 2.1MBUpgrade TableWare V2.x to v2.4Posted: 09/29/2005Description: Upgrades TableWare v2.x to version 2.4.  A serial number...

TableWare Version 3.0 Installer (6.74 MB)TITLEVERLinksTableWare3.0Product PageDescriptionWhen downloaded, this file can be run to install TableWare. There is no free demo/trial version of TableWare. In order to install TableWare, you must purchase the software and obtain a serial number. The installation process prompts you to enter the serial number. The serial number will be located on a sticker on the CD pouch. Optionally, the serial number can be emailed to you upon request.SummaryYou know about...

Update: MET/CAL version 10.1.1 for MET/TEAM 2.3.0 (.zip)Documents:MET/CAL 10.1.1 Readme (.pdf)This update does not impact MET/CONNECT Customers. It includes the existing Hot Fix for MET/CAL version 10.1.0.Current MET/TEAM Customers:MET/CAL version 10.1.1 release is an update to previous MET/CAL software. This update includes bug fixes and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If...

Release: MET/CAL version 10.1.0 for MET/TEAM 2.3.0 (.zip)Current MET/TEAM Customers:MET/CAL version 10.1.0 release is an update to previous MET/CAL software. This update includes bug fixes and minor updates.Do not manually uninstall the previous version. If you do this before attempting to install this version, you may lose other information and files.If you have installed MET/CAL Runtime and/or MET/CAL Editor on any workstations, be sure to run the MET/CAL Client installer on all MET/CAL workstations...

Poor grounding contributes to unnecessary downtime, but a lack of good grounding is dangerous and increases the risk of equipment failure. Without an effective grounding system, you could be exposed to the risk of electric shock, not to mention instrumentation errors, harmonic distortion issues, power factor problems and a host of possible intermittent dilemmas. If fault currents have no path to the ground through a properly designed and maintained grounding system, they will find unintended paths that could include people.

HVAC technology true-RMS meters are essential test tools for accurately measuring and troubleshooting complex HVAC control systems.

Learn how to choose the right IR lens for your thermal camera and why germanium is used in thermal camera lenses.

Understand what the NFPA 70E standards for arc flash PPE assessment means for thermographers using thermal imaging camera.

Calibrating a HART temperature transmitter requires an accurate temperature simulator or temperature source, mA measurement, and a HART communication tool for calibration. You can use separate tools or a calibrator that integrates all three to perform this task. HART is an industry standard defining the communications protocol between smart field devices and a control system that uses 4-20 mA wiring.Before going to the field, gather the needed calibration and communication test tools. If testing...

Why choose the Fluke T6 Electrical tester? Read 9 things to love about the first electrical tester that performs AC current, AC voltage and frequency up to 1000 V AC without test leads.

Using a multimeter that provides the right measurements is important. Knowing what those measurements mean is even more important. Accuracy and precision ensures the measurements you take will be useful; higher precision enables easier repeatability and higher accuracy means the your readings will be closer to perfect.Looking for a multimeter recommendation? Adam Savage from MythBusters has a few you might be interested in. Read the article and watch the video for details.What is the Accuracy of...

Insulated hand tools provide critical safety protection for electricians and technicians who work with live electrical equipment.

An overview of the four main Industrial Ethernet protocols including modbus TPC/IP, EtherCAT, Ethernet/IP, PROFINET. How these communication networks differ from the commercial Ethernet LAN environment.