Fluke Networks MicroScanner™ 2 Industrial Ethernet Cable Verifier
- Graphical wire map, length, cable ID, and distance to fault
- Test RJ11, RJ45, Coax, and Industrial Ethernet connector types
- Locate cables with IntelliTone™ digital and analog toning
- Verify 10/100/1000 Ethernet and detects PoE
- Work in any enviroment with backlit LCD screen
Product overview: Fluke Networks MicroScanner™ 2 Industrial Ethernet Cable Verifier
The Fluke Networks MicroScanner™2 Industrial Ethernet Cable Verifier performs continuity tests on RJ45, M12X, M12D, and M8D terminated cables in seconds and displays results graphically so you can see opens, shorts, and crossed wires.
It also reports which end of the cable has a problem and reports the distance to an open connection within the cable. Cable failures result in costly production downtime so it’s important to quickly identify where the cable is broken so it can be replaced or repaired.
Includes Duffle Bag, Multi-Connector Adapter, Cat6A patch cord, RJ45 male to RJ45 female patch cord , RJ45/M12X patch cord, RJ45/M12D patch cord, RJ45/M8D patch cord for testing of M12X, M12D, M8D terminated cables.
Specifications: Fluke Networks MicroScanner™ 2 Industrial Ethernet Cable Verifier
Specifications apply at 23 °C (73 °F), unless otherwise noted.
|Operating temperature||32 °F to 113 °F (0 °C to 45 °C)|
|Storage temperature||-4 °F to +140 °F (-20 °C to +60 °C)|
|Operating relative humidity (% RH without condensation)||90 % (50 °F to 95 °F 10 °C to 35 °C)|
75 % (95 °F to 113 °F 35 °C to 45 °C)
|Shock and Vibration||Random, 2 g, 5 Hz-500 Hz (Class 2)|
1 m drop test with and without wiremap adapter attached
|Safety||IEC 61010-1 3rd Edition|
|Altitude||4,000 m; Storage: 12,000 m|
|Test connectors||Shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs. MicroScanner2: F-connector for coaxial cable.|
|Power||Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries|
Battery life: 20 hours of typical use
Other compatible battery types: 2 AA photo lithium, NIMH, NICAD
|Dimensions and weight (with batteries installed and wiremap adapter attached)||3 in x 6.4 in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm)|
MicroScanner2: 10.6 oz (300 g)
|Display||Monochrome LCD with backlight|
|Cable test||Measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports. Displays results on one screen.|
|Tone||Generates IntelliTone™ and normal analog toning signals|
|PoE||MicroScanner2: Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices|
|Cable types tested||Twisted pair: UTP, FTP, SSTP|
Coaxial (MicroScanner2): 75 Ω, 50 Ω, 93 Ω
|Length test||Range: 460 m (1500 ft)|
Resolution: 0.3 m (1 ft)
Typical accuracy: ± 4% or 0.6 m (2 ft) whichever is greater. NVP uncertainty is an additional error.
Calibration: User-settable NVP for twisted pair and coax (MicroScanner2). Can determine actual NVP with known length of cable.
|Wiremap test||Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs. The wiremap is drawn with proportional length to visually indicate the approximate location of faults.|
|Ethernet port detection||MicroScanner2: Detects the advertised speed of 802.3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, and 1 Gbps.|
|Tone generator||Supports toning and cable mapping with a Fluke Networks digital IntelliTone™ probe. Generates four tones compatible with typical analog probes. SmartTone™ feature gives positive identification of cables in bundles when using an IntelliTone or an analog probe.|
Models: Fluke Networks MicroScanner™ 2 Industrial Ethernet Cable Verifier
MS2-100-IE Cable Verifier
- MicroScanner™ 2 Industrial Ethernet Basic Kit with Duffle Bag
- Multi-Connector Adapter
- Cat6A patch cord
- RJ45 male to RJ45 female patch cord
- RJ45/M12X patch cord
- RJ45/M12D patch cord
- RJ45/M8D patch cord for testing of M12X
- M8D terminated cables