Fluke Networks Pro3000™ Tone Generator and Probe Kit
Fluke Networks Pro3000™ Tone Generator and Probe Kit is rated out of 5 by 1.
Key features
- Send tone signal up to 10 miles (16 km) on most cables
- Analog tone generator with bed-of-nails clips, unfiltered probe
- SmartTone™ provides 5 distinct tones for exact pair identification
- Continuity testing and line polarity confirmation
- Ergonomic sleek design, 3.5 mm headphone jack
Product overview: Fluke Networks Pro3000™ Tone Generator and Probe Kit
Pro3000™ analog tone generator and probe kit uses the SmartTone™ technology, with five different tones for exact pair identification, and provides clear and precise tracing of communication cabling. Simply short the selected pair at the near or far end to change the cadence of the tone generated.
Specifications: Fluke Networks Pro3000™ Tone Generator and Probe Kit
| Pro3000 Analog Toner Specifications | |
|---|---|
| User interface | Slide switch selects Continuity or Tone Mode Push button switch selects SOLID, ALT or OFF Tone mode LED Continuity/Polarity LED |
| Solid Frequency | 1000 Hz nominal |
| Alternating Frequency | 1000/1500 Hz nominal |
| Over Voltage Protection | 60 Vdc in Toner/Polarity Mode |
| Output Power in Tone Mode | 8 dbm into 600 ohms |
| Output Voltage Level in Continuity Mode | 8 Vdc with fresh battery |
| Battery | 9V alkaline |
| Temperature | Operating: -20° C to 60° C, Storage: -40° C to 70° C |
| Case dimensions | 2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm) |
| Pro3000 Analog Probe Specifications | |
|---|---|
| User interface | ON/OFF push button Volume dial Replaceable tip 3.5 mm earphone jack |
| Battery | 9V alkaline |
| Temperature | Operating: -20° C to 60° C, Storage: -40° C to 70° C |
| Case dimensions | 9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm) |
Can I use this toner on a Romex 12-2 circuit?
Please call Fluke Network’s Customer Care Center for the United States and Canada at 1-800-283-5853.
Date published: 2024-06-08
Can I use this to find a break in an Invisible Dog Fence?
Is this able to find 66000kv under ground cable.
Rated 3 out of 5 by Maxi from Its Alright I've used this tool for the last 3 years, it works don't get me wrong but it has issues. First off the tone coming out of the Tone Generator is strong, there are no issues with that piece of this in my opinion. The issue is with the probe itself. The entire thing is plastic, and not the strong kind. If it slip out of your hand when you go to put it back in the case or something manages to hit the tip of it in any way the whole tip of the piece crack and the end of it just falls out. I've used about 3 of them now. The speaker goes after about 2 years and if you manage to make it last that long without breaking the pickup on the probe just starts to crackle and get iffy. Sometimes you'll hear the tone sometimes you wont. In my opinion this tool is NOT worth almost $170 dollars and as someone who uses this tool constantly I would change the following.
1. Don't make the tools out of cheap easy to break plastic.
2. Upgrade the speaker inside and the wiring that goes to it (its not built to last)
3. Do some drop testing and durability tests on these things to see for yourself how they'll behave for workers in the field. (and yes I understand they're not meant to be dropped but things happen when your working and stuff falls)
Date published: 2026-07-27