Fluke 324 True-RMS Clamp Meter with Temperature & Capacitance
Fluke 324 True-RMS Clamp Meter with Temperature & Capacitance is rated out of 5 by 24.
Compare products: clamp meters
- Fluke 325 True RMS Clamp Meter
- Fluke 381 Remote Display True RMS AC/DC Clamp Meter with iFlex®
- Fluke 323 True RMS Clamp Meter
- Fluke 373 True-RMS AC Clamp Meter
- Fluke 365 Detachable Jaw True RMS AC/DC Clamp Meter
- Fluke 773 Milliamp Process Clamp Meter
- Fluke 355 True RMS 2000 A Clamp Meter
- Fluke 353 True RMS 2000 A Clamp Meter
- Fluke 772 Milliamp Process Clamp Loop Meter
- Fluke 771 Milliamp Process Clamp Meter
- Fluke T5-1000 Voltage, Continuity and Current Tester
- Fluke T5-600 Electrical Tester
Key features
“It does everything a HVAC or Maintenance Tech would need. Out of 12 guys I work with 9 of them had the 324” - Thomas
- Rugged, reliable basic True-RMS clamp meter
- Measure AC current up to 400 A, AC/DC voltage to 600V
- Measure resistance up to 4kΩ, continuity detection ≤ 30Ω
- Additions from 323 Clamp: Temperature, Capacitance, Backlight
Product overview: Fluke 324 True-RMS Clamp Meter with Temperature & Capacitance
The Fluke 324 True-RMS Clamp Meter is a reliable, solid troubleshooting tool for commercial and residential electricians, featuring True-RMS measurements, a slim design for easy transport and use, and a large display for efficient troubleshooting. With the addition of Temperature and Capacitance, it has everything an HVAC technician could need.
Troubleshoot problems safely and accurately
- CAT III 600 V, CAT IV 300 V safety rating
- Provides True RMS AC voltage and current for accurate measurements on non-linear signals
- Measures AC current up to 400 A
- Measures AC/DC voltage to 600V
- Measures resistance to 4kΩ with continuity detection ≤ 30Ω
- Measures temperature from -10C to 400C
- Measures capacitance to 1000μF
- Backlight and hold function captures a reading on the display
- Comes with a two-year warranty and soft carrying case
Fluke 320 Series Clamp Meters for electrical troubleshooting
Contents:
- Fluke 324 True-RMS Clamp Meter
- TL75 Test Leads
- Type K Thermocouple
- Two AAA Batteries (Installed)
- Soft Case
What's in the box:
- 324 True-RMS Clamp Meter
- (1 pair) TL75 Test Leads
- Type K Thermocouple
- Two AAA Batteries (Installed)
- Soft Case
- Quick Reference Guide
Specifications: Fluke 324 True-RMS Clamp Meter with Temperature & Capacitance
Specifications | ||
AC current | Range | 40.00 A / 400.0 A |
Accuracy | 1.5% ± 5 digits (45 Hz to 400 Hz) Note: Add 2% for position sensitivity | |
DC current | Range | - |
Accuracy | - | |
AC voltage | Range | 600.0 V |
Accuracy | 1.5% ± 5 digits | |
DC voltage | Range | 600.0 V |
Accuracy | 1.0% ± 5 digits | |
Resistance | Range | 400.0 Ω/ 4000 Ω |
Accuracy | 1.0% ± 5 digits | |
Continuity | ≤ 30 Ω | |
Capacitance | 0 to 100.0 μF / 100μF to 1000 μF | |
Frequency | - | |
AC response | True-RMS | |
Backlight | Yes | |
Data hold | Yes | |
Contact temperature | -10.0°C to 400.0°C (14.0°F to 752.0°F) | |
Min/Max | - | |
Size | H x W x D (mm) | 207 x 75 x 34 |
Max wire diameter | 30 mm (600 MCM) | |
Weight | 208 g | |
Category rating | CAT III 600 V CAT IV 300 V | |
Warranty | Two-year |
Models: Fluke 324 True-RMS Clamp Meter with Temperature & Capacitance
Fluke 324
Fluke 324 True-RMS Clamp Meter
Includes:
- Fluke 324 True-RMS Clamp Meter
- TL75 Test Leads
- Type K Thermocouple
- Two AAA Batteries (Installed)
- Soft Case
Can the 324 measure current via the test leads, with the leads in series in the circuit? If so, what is the limit? The specs don't specify leads vs. jaws, but specify a current range of '40A / 400A'
The Fluke 324 True-RMS Clamp Meter with Temperature & Capacitance can measure current with jaws only, not test leads.
Date published: 2023-11-28
Rated 4 out of 5 by Lara from Good product 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻? Good 👍🏽 I’ll get in my work 👍🏻👍🏻👍🏻👍🏻👍🏻
Date published: 2023-05-02
Rated 4 out of 5 by mike072 from I need this for work I like Fluke meters and in the past, the amp/ volt meter did not check capacitance. After losing my last meter I decided to spend more than twice as much money and get the meter that will do what I needed. I am glad I did, I can tell this meter is better than a cheaper fluke meter. The dial moves better, the buzz is louder. I got lucky and the leads are better. The one thing that would make this better, I use my meter several times a day just about everyday. Because of that I leave the leads attached. The bag that comes with it is to small if you leave the leads attached. They should make the bag bigger, the bag can help protect it like water or rain.
Date published: 2023-04-11
Rated 5 out of 5 by Gill from Great tool I bought this 2 months ago very good futures tool so far thank you
Date published: 2021-10-10
Rated 5 out of 5 by GDRR from Great product I use it every day. I love it! It is very easy to use, has everything the HVAC guy needs most often, and my aftermarket needle nose test leads fit in this meter. so I am totally satisfied!
Date published: 2021-07-11
Rated 4 out of 5 by Jordan from Almost perfect I work in commercial/industrial HVAC and this meter checks almost all the boxes for me. The only downside is no magnet and the magnet accessory sold by fluke does not work with it. But Amazon has magnet bars with double sided tape that fixes that issue.
Date published: 2021-06-20
Rated 1 out of 5 by Kmh133 from Disappointed Bought meter in august 2018.
Changed batteries for the first time and one of the negative contacts for battery was broken off. Never had the battery cover off before.
Called fluke and was told I could ship the meter back to them at my cost and they would send me a new one for a slightly discounted price!
Will not purchase another fluke !
Date published: 2021-03-16
Rated 1 out of 5 by BrettG5610 from Did not last! I bought the Fluke 324 in August 2019. Meter stopped working in November 2020, showing a display message of "Low Battery". I replaced the batteries with a new set and still the meter won't work! Doesn't matter what batteries I put in the meter.. still doesn't work!
For the amount of money I spent on this meter, and the fact that I take very good care of my tools.. I believe this meter should have lasted A LOT longer than it did!
According to the Fluke web site, the warranty is for one year. My meter stopped working 3 months after the warranty period!
Date published: 2021-03-02
Rated 5 out of 5 by Flrsedith from Great Gift! Perfect gift for my brother who happens to be an electrician, he absolutely loved it!
Date published: 2020-06-02