English

Fluke LVD2 Non-Contact Voltage Tester

Fluke LVD2 Non-Contact Voltage Tester is rated 3.2 out of 5 by 29.
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 26.1ms
  • REVIEWS, PRODUCT
  • LVD2
  • LVD2
  • LVD2
  • LVD2

Key features

  • Non-contact AC voltage tester and LED flashlight
  • Detects from 90 to 600 V AC
  • Features dual-sensitivity for two levels of detection
  • Indicates proximity to AC voltage source with blue light
  • Indicates you’re at the source with red light
  • Ultra-bright white LED light with 100,000-hour bulb life
  • Safety rated to CAT IV 600 V
  • Operating temperature 0°C to 50°C
  • AAA battery included

Product overview: Fluke LVD2 Non-Contact Voltage Tester

Fluke LVD2 Volt Light detects voltage without contact

LVD2 volt light, offered by Fluke combines a non-contact AC voltage detector and LED flashlight into one easy to use pen-style design. It features dual sensitivity detection, turning blue from 1” to 5” (2.54 cm to 12.7 cm) from the source and red when at the source. The LVD2 is a CAT IV 600 V rated and is suitable for commercial and industrial applications.

Reviews: Fluke LVD2 Non-Contact Voltage Tester

Rated 2 out of 5 by from Low specificity I liked the dual range idea, and the flashlight was a nice addition, but.... its not as accurate as my $15 one. At any angle and distance its as likely to show neutral, ground or hot as being energized (and no, it isn't). Maybe mine is just a lemon.
Date published: 2020-07-04
Rated 5 out of 5 by from The only one i trust my life with. bought several of these over the years. Read the negative reviews they are ridiculous. you don't like the light buy a different model they make 3...... want the whole tip to glow buy a different model they image shows the light. Buzzers are annoying an who could hear them in a factory anyways. love the blue to red transition as you approach a wire makes identifying the hot wire in a bunch easier. the one real criticism is the battery light button. the first one i had was perfect the replacement when it went missing the button stuck on. if you flicked it i could get it to shut off was never really a big deal enough where i wanted to have it replaced. I tested many many models before selecting this be sure there is no calibration wheel. if there is you can make it go off or not go off at almost any voltage. how useful is that? if i have to go get my meter anyways..... why even have it.
Date published: 2019-12-23
Rated 2 out of 5 by from Kinda shoddy 1. There's no sound associated with the light, so it's difficult in bright rooms or awkward areas. 2. Mine only works intermittently now, and it's less than two years old.
Date published: 2019-11-21
Rated 1 out of 5 by from Horrible I went out of my way today was late to work all to buy a new fluke non-contact tic tracer because mine broke the guy on the phone said they had the new one with the laser at rexel I drove all the way there they did not he convinced me to buy the lvd2 I purchased which was $50 plus no joke I want to pull it out of my pocket to use it in the top or the battery is pulled right off and now it won't stay on it just clicks off anytime you go to pick it up or even touch it also besides that horrible experience I noticed when I seen other reviews that the flash light stays on at all times why would you do that but anyways i'm very disappointed I wanted to buy the new t6 tester where you just don't need a plan that you just put the wires almost to it surrounded I should say and now i'm very hesitant especially after rexel would not even give me any of my money back I couldn't believe it literally was two hours later not even used crazy horrible experience and it's sad because fluke makes the best testers but now I got to find a new company or have this situated
Date published: 2019-10-25
Rated 3 out of 5 by from It's fair The previous Fluke model was much better. Don't like the flashlight coming on. If I could open it I would disable the flashlight. Cost too much. Fluke can do better.
Date published: 2019-10-19
Rated 5 out of 5 by from Many years of reliable service. I have had my LVD2 for many years. Its been misplaced and dropped a number of times but this simple, low cost device just keeps working. I see a few have made some complaints but I think this pocketable product is spot on. Lose it or break it? Not a big investment so if lost or broken, it is easily replaced at a low cost. Safe to use? Yes but if your working inside a high voltage piece of equipment, use your training to select the best tool for the job to maintain your safe distance. FLUKE could make a night stick sized version with a 20,000 volt shell including a full hand cover-boot with a luggable case. Or just use another instrument that is better suited for the given job. But for fast go-no go checks for a lot of equipment live power checks, this pocketable "tool" is great! I would like to get a replacement power switch-cap. My battery latch is now failing but not complaining given the years of use, dropping, etc. Using an ultra small drill bit, I pinned the cap with a tiny (eye glass hinge screw) phillips head machine. screw through the cap & case. Used mine in industrial systems, imagesetters, computer room electrical and communications equipment.
Date published: 2019-07-30
Rated 5 out of 5 by from EXCELENTE PERFECTA HERRAMIENTA DE TRABAJO A PERPETUIDAD (DISPOSITIVO ETERNO)
Date published: 2018-10-27
Rated 1 out of 5 by from Have to rotate to see if you have voltage I had other fluke voltage testers and this LVD2 model is garbage, When you turn it on and place it near a wire, you may or may not know if there is power there because you have to rotate the unit to see if it lights up, The tip is square but only one side lights up near the handle. Very aggravating. The WHOLE thing SHOULD light up bright RED when there is power! Right now its a dinky LED inside that lights up. WHY is it so hard to make the WHOLE TIP light up at any angle? Right now its just a expensive flashlight! Come on FLUKE, I found this problem in 10 sec's - Don't make garbage light this!!!
Date published: 2018-10-26
  • y_2020, m_8, d_25, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_29
  • loc_en_US, sid_fluke-lvd2, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_fluke
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 25.59ms
  • REVIEWS, PRODUCT

Resources: Fluke LVD2 Non-Contact Voltage Tester