Fluke i30s AC/DC Current Clamp

  • Fluke I30s AC/DC Current Clamp | Fluke
Buy now

Fluke i30s AC/DC Current Clamp product overview

The i30s current clamp is based on Hall Effect technology for use in measurement of both DC and AC current. The i30s may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.

Fluke i30s AC/DC Current Clamp specifications

Electrical specifications
Specified current range 30 mA to 30 A DC, 30 mA to 20 A AC rms
Usable current range 5 mA to 30 A DC, 30 mA to 20 A AC rms
Crest factor 1.4 in
Output sensitivity 100 mV/A
Accuracy (at +25°C) ±1% of reading ±2 mA
Resolution ±1 mA
Load impedance > 100 kΩ
Conductor position sensitivity ±1% relative to center reading
Frequency range DC to 100 kHz (-0.5 dB)
Phase shift below 1 kHz < 2°
Temperature coefficient ±0.01% of reading / °C
Power supply 9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator
Working voltage (see Safety Standards section) 300 V AC rms or DC
General Specifications
Maximum conductor size 19 mm diameter
Output connection Safety BNC connector, supplied with safety 4 mm adapter
Output zero Manual adjust via thumbwheel
Cable length 2 m
Operating temperature range 0°C to +50°C
Storage temperature range (with battery removed) -20°C to +85°C
Operating humidity 15% to 85% (non-condensing)
Weight 250 g
Safety IEC 61010-1, Pollution Degree 2
IEC 61010-2- 032: CAT III 300V
Use of the probe on uninsulated conductors is limited to 300 V ac rms or dc andfrequencies below 1 kHz.
EMC Compatibility IEC 61326-1: Portable Electromagnetic Environment

Fluke i30s AC/DC Current Clamp models

Fluke i30s

AC/DC Current Clamp

Buy it