Fluke i3000s Flex-24 AC Current Clamp, 610 mm (24 in.)

  • Fluke I3000s Flex-24 AC Current Clamp, 610 Mm (24 In.) | Fluke

Key features

  • Three ranges: 30 A, 300 A & 3000 A, 1, 10 or 100 mV/A output
  • Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
  • Maximum conductor diameter 178 mm (7 in.)
  • CAT III 600 V safety rating
Buy now

Product overview: Fluke i3000s Flex-24 AC Current Clamp, 610 mm (24 in.)

The i3000s Flex is an ac current clamp utilizing the Rogowski principle. It can be used to measure currents up to 3000 A when used in conjunction with oscilloscopes, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.

Also available in pack of 4 for use in Power Quality Analyzers. Click here for more info.

Specifications: Fluke i3000s Flex-24 AC Current Clamp, 610 mm (24 in.)

Electrical Specifications
Current ranges 30 A
300 A
3000 A
AC rms
Output sensitivity (AC-coupled) 100 mV
10 mV
1 mV per A
Load impedance 100 kΩ minimum
Accuracy at +25°C: ±1% of range (45 Hz to 65 Hz)
Linearity 10% to 100% of range: ±0.2% of reading
Noise 8 mV AC rms (30 A)
2 mV AC rms (300 A, 3000 A)
Frequency range 10 Hz to 50 kHz (-3 dB)
Phase error < ±1° (45 Hz to 65 Hz)
±10° (at 20 kHz)
Position Sensitivity with cable > 25 mm from the coupling: ±2% of range
External field with cable > 200 mm from the head: ±1% of range
Power supply 2 x AA/MN 1500/LR6 Alkaline, 400 hours, low battery indicator or dedicated external power supply
Temperature coefficient ±0.08% of reading per °C
Working voltage see Safety standards section: 600 V AC rms or DC
General Specifications
Head circumference 610 mm (24 in)
Head cable diameter 14.3 mm (0.56 in)
Head bend radius 38.1 mm (1.5 in)
Cable length (head to electronics) 2 m (6.56 ft)
Output connection 0.5 m cable terminated with safety BNC connector. Supplied with 4mm safety plug adapter
Operating temperature range -20°C to +90°C (-4°F to 190°F) (head)
-20°C to +85°C (-4°F to 185°F) (electronics)
Storage temperature range -40°C to +105°C (-40°F to 221°F) (head)
-20°C to +85°C (-4°F to 185°F) (electronics)
Operating humidity 15% to 85% (non-condensing)
Weight 180 g (0.396 lb) (head)
190 g (0.419 lb) (electronics)
Safety standards BS EN 61010-1: 2001
BS EN 61010-2-032: 2002
BS EN 61010-031: 2002
600 Vrms, Category III, Pollution Degree 2
Use of the probe on uninsulated conductors is limited to 600 V AC rms or DC and frequencies below 1 kHz
EMC standards EN 61326: 1998 +A1, A2, & A3
Head cable length (double insulated) 610 mm or 914 mm, depending on model

Models: Fluke i3000s Flex-24 AC Current Clamp, 610 mm (24 in.)

Fluke i3000s Flex 24

AC Current Clamp, 610 mm (24 in.)

Buy it