Yuenglings toolbox


What's in your toolbox? Yuengling Tampa Brewery

Fluke tool Uses
Fluke thermal imager Detecting possible problems in motors and mechanical equipment (such as an overheated motor on a spent grain pump).
Fluke 810 Vibration Tester Identigying bearing problems in rotation equipment, such as blower motors and pumps.
Investigating possible problems detected with the thermal imager.
Fluke 1735 Three-Phase Power Logger Comparing current draw against rotational speed and output pressure on positive displacement pumps to help verify bearing problems detected with a Fluke 810 Vibration Tester.
Fluke 9040 Phase Rotatio Indicator Verifying correct connections in three-phase systems.
Fluke 744 Documenting Process Calibrator Verifying the performace of temperature and pressure measurement instruments.
Viewing and changing device parameters in HART-compatible instruments.
Fluke 707 Loop Calibrator Verifying that analog PLC cards are reading signals and working properly.
Fluke 700PTP-1 Pneumatic Test Pump Delivering air at known pressure to calibrate instruments and sensors.
Fluke 322 Clamp Meter Checking current draw and power consumption.
Fluke 771 Milliamp Process Clamp Meter Checking instrument and control signals without breaking the circuit or interrupting the process.
Fluke i3000s Flex AC Current Clamp Measuring currents of up to 1,500 amps through any leg of a substation.
Fluke Networks test tools Testing and repairing the Ethernet network that links 60 programmable logic controllers (PLCs) in the brewery.