Fluke Calibration P3200 Hydraulic Deadweight Tester

  • Fluke Calibration P3200 Hydraulic Deadweight Tester | Fluke

Nøglefunktioner

  • Pressure ranges to 10,000 psi (700 bar)
  • 0.015% of reading accuracy standard (0.008% optional)
  • Single or dual piston formats
  • Built-in hand pumps standard
  • Mounted spirit level with adjustable feet
  • Units can be trimmed to local gravity FOC
Få en gratis demoKøb nu

Produktoversigt: Fluke Calibration P3200 Hydraulic Deadweight Tester

The P3200 models are available in single or dual piston formats for increased operating ranges. Units can be supplied in psi, bar, kgf/cm², and MPa. This robust instrument is highly accurate, quick and easy to use. Units feature a built-in priming pump for large volume applications, piston flotation indicators and a high quality screw press for fine pressure control.

Options

PressCal software for pressure calculations and certificate generation

Specifikationer: Fluke Calibration P3200 Hydraulic Deadweight Tester

Pressure Ranges
Distilled water operatedRanges to 10,000 psi (700 bar)
Accuracy
Accuracy1±0.015% of reading (±0.008% optional)
1. Accuracy based on % of reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) x 10% of the piston range.
Materials of Construction
Standard weight materialSeries 3 non-magnetic austenitic stainless steel
Weight density7.8 g/cm³
Optional fractional weightsSolution heat treated aluminum
Weight density2.7 g/cm³
Piston materialTungsten carbide with nickel binder
Density- 15.0 g/cm³
Cylinder materialHardened martensitic steel
Tungsten carbide (water above 500 psi, 35 bar)
Thermal coefficients of expansionOil piston/cylinder 16.5 ppm/°C
Water (above 500 psi, 35 bar) 11 ppm/°C
General
Test port adaptors1/8, 1/4, 3/8 and 1/2
NPT or BSP
Instrument weight36 lbs (16 kg)
Instrument size (W x D x H)17.5 x 12 x 8.5 in (440 x 300 x 215 mm)
Mass set weight (typical)80 lbs (36 kg)
Reservoir volume150 cc
Screw press displacement5.5 cc
Pump displacement4.7 cc per stroke
O-ring seal materialsBuna N as standard, Viton and EPDM available
Weight Increments
Minimum standard weight incrementsUp to 500 psi (35 bar): 1 psi (0.1 bar)
500 to 5000 psi (35 to 350 bar): 10 psi (1 bar)
5000 to 20,000 psi (350 to 1400 bar): 20 psi (2 bar)
Model P3112: 1 psi (0.1 bar)
Optional fractional weightsUp to 500 psi (35 bar): 0.1 psi (0.01 bar)
500 to 5000 psi (35 to 350 bar): 1 psi (0.1 bar)
5000 to 20,000 psi (350 to 1400 bar): 2 psi (0.2 bar)
Operating Fluids
Operating fluidsDistilled or deionized water
Options
PressCal softwareWindows-based software program that allows users to easily apply all necessary corrections to enhance the deadweight tester performance. Calibration details are then stored and/or used to automatically create a calibration certificate. PressCal is provided as standard with all 0.008% instruments
FluidsInstruments can be supplied for use with Skydrol or brake fluids. Due to the aggressive nature of these fluids the standard nitrile seals and the acrylic reservoir tube will be replaced by either Viton or EPDM seals (as applicable) and an aluminum reservoir tube. For these or any other specialty fluid applications, please consult the factory.

Modeller: Fluke Calibration P3200 Hydraulic Deadweight Tester

Fluke P3214-1
Fluke Calibration P3214-1 Hydraulic Deadweight Tester
Pressure Range 20 to 700 bar
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3211-1
Fluke Calibration P3211-1 Hydraulic Deadweight Tester
Pressure Range 1 to 35 bar
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3211-3
Fluke Calibration P3211-3 Hydraulic Deadweight Tester
Pressure Range 10 to 500 psi
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3211-2
Fluke Calibration P3211-2 Hydraulic Deadweight Tester
Pressure Range 1 to 35 kgf/cm²
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3211-4
Fluke Calibration P3211-4 Hydraulic Deadweight Tester
Pressure Range 100 to 3,500 kPa
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3211-5
Fluke Calibration P3211-5 Hydraulic Deadweight Tester
Pressure Range 0.1 to 3.5 MPa
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3213-1
Fluke Calibration P3213-1 Hydraulic Deadweight Tester
Pressure Range 10 to 350 bar
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3213-2
Fluke Calibration P3213-2 Hydraulic Deadweight Tester
Pressure Range 10 to 350 kgf/cm²
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3213-3
Fluke Calibration P3213-3 Hydraulic Deadweight Tester
Pressure Range 100 to 5,000 psi
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3213-4
Fluke Calibration P3213-4 Hydraulic Deadweight Tester
Pressure Range 1,000 to 35,000 kPa
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3213-5
Fluke Calibration P3213-5 Hydraulic Deadweight Tester
Pressure Range 1 to 35 MPa
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3214-2
Fluke Calibration P3214-2 Hydraulic Deadweight Tester
Pressure Range 20 to 700 kgf/cm²
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3214-3
Fluke Calibration P3214-3 Hydraulic Deadweight Tester
Pressure Range 200 to 10,000 psi
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3214-4
Fluke Calibration P3214-4 Hydraulic Deadweight Tester
Pressure Range 2,000 to 70,000 kPa
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3214-5
Fluke Calibration P3214-5 Hydraulic Deadweight Tester
Pressure Range 2 to 70 MPa
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – single PCU
Fluke P3223-1
Fluke Calibration P3223-1 Hydraulic Deadweight Tester
Pressure Range 1 to 350 bar
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU
Fluke P3223-2
Fluke Calibration P3223-2 Hydraulic Deadweight Tester
Pressure Range 1 to 350 kgf/cm²
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU
Fluke P3223-3
Fluke Calibration P3223-3 Hydraulic Deadweight Tester
Pressure Range 10 to 5,000 psi
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU
Fluke P3223-4
Fluke Calibration P3223-4 Hydraulic Deadweight Tester
Pressure Range 100 to 35,000 kPa
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU
Fluke P3223-5
Fluke Calibration P3223-5 Hydraulic Deadweight Tester
Pressure Range 0.1 to 35 MPa
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU
Fluke P3224-1
Fluke Calibration P3224-1 Hydraulic Deadweight Tester
Pressure Range 1 to 700 bar
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU
Fluke P3224-2
Fluke Calibration P3224-2 Hydraulic Deadweight Tester
Pressure Range 1 to 700 kgf/cm²
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU
Fluke P3224-3
Fluke Calibration P3224-3 Hydraulic Deadweight Tester
Pressure Range 10 to 10,000 psi
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU
Fluke P3224-4
Fluke Calibration P3224-4 Hydraulic Deadweight Tester
Pressure Range 100 to 70,000 kPa
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU
Fluke P3224-5
Fluke Calibration P3224-5 Hydraulic Deadweight Tester
Pressure Range 0.1 to 70 MPa
Køb

Includes:

  • Hydraulic Deadweight Tester
  • Water operated – dual PCU